Jump to content
SAU Community

Hks 2510 On A R33 Gtst

MR R33 GTST

By MR R33 GTST,
in Engines & Forced Induction

 Share

Recommended Posts

MR R33 GTST Proficient

MR R33 GTST

Posted
Posted

Hi all i have done a search and can only find HKS 2510'S on rb20's i just brought this turbo i got it cheap i am just wondering if anyone else has a 2510 on there r33 and what type of power are they making and what do i have to do to get the oil and water lines to fit thanks

Link to comment
https://www.sau.com.au/forums/topic/91464-hks-2510-on-a-r33-gtst/
Share on other sites
Bunta Grand Master

Bunta

Posted
Posted
you don't find any RB25's with 2510's cause they are about the size of the stock turbo that comes with the rb25.

why would you spend so many dollars to get no power increase or maybe 10 rwkw increase?

If it is the turbo I am thinking of it wasnt very expensive at all (Second hand). So I guess he wanted it as he put more boost through it (Being steel wheel) and make 200rwkw easily rather than being on the edge of busting his stocker..I dunno, I see it pretty much as a stocker with steel wheels so it will last longer with more than 12 pound boost!

MR R33 GTST Proficient

MR R33 GTST

Posted
  • Author
Posted
If it is the turbo I am thinking of it wasnt very expensive at all (Second hand). So I guess he wanted it as he put more boost through it (Being steel wheel) and make 200rwkw easily rather than being on the edge of busting his stocker..I dunno, I see it pretty much as a stocker with steel wheels so it will last longer with more than 12 pound boost!

exacly what bunta said i go this cheap so thats why i brought it and all i want is about 210 rwkw i will be happy with that so i will see how i go

Bunta Grand Master

Bunta

Posted
Posted
exacly what bunta said i go this cheap so thats why i brought it and all i want is about 210 rwkw i will be happy with that so i will see how i go

I know somone who has made 205rwkw on one on a r33 quite comfortably so you should get to 210 with the added bounus (Over stock)of not having to worry about your exhaust wheel falling off!

Robo's Mentor

Robo's

Posted
Posted

Well i think the 2510 would be better than a stock R33 turbo. I had the 2530 which by visual and measurements, it was only slightly bigger than stock, say 2/3 mm. Performance was substantially better though. Im sure running some pretty good boost, the 2510 would be better than a stocky. But you'll need a power FC , cooler and basic mods to get the best from it.

As far as oil and water lines, cost me about $100-$150 to do it. Take your turbo into hose shop and fittings and tell them what you want, study the turbo first.

Good Luck

MR R33 GTST Proficient

MR R33 GTST

Posted
  • Author
Posted

thanks for your in put robo i have all the other mods the only thing i dont have done is the injectors so i guess i will see how i go so you just think take both turbos down to a hose shop and just get them to make up some hose like the orginal hoses to fit on the 2510?

benl1981 Grand Master

benl1981

Posted
Posted

Would it be as responsive as the stock turbo? Or more responsive?

Would it have the same top end as the stocky or less?

It went for a pretty cheap price - was considering it myself.

Wouldn't you make close to 200rwkw at 5000rpm on the stocker?

It's good if you dont have to worry about the turbine wheel going for a wander to look for the cat..

MR R33 GTST Proficient

MR R33 GTST

Posted
  • Author
Posted
you definatly won't need injectors with that turbo, it will run out of puff up top, but will be very responsive :O

thats good to know least i aint speading more money my goal was over 200rwkw so if i make over that i will be happy with what i have spent

ferni Grand Master

ferni

Posted
Posted

I don't know what you paid for it, but if i had a Gtst i'd stick a HKS 25/35 on with PFC, good tune, and make 230rwkw ish... still very responsive. but 25/35 would of been more expensive than the 25/10. Good Luck.

MR R33 GTST Proficient

MR R33 GTST

Posted
  • Author
Posted

robo when you had the 2530 on what type of power were you making and what 1/4 mile times were you running ?

and have you fitted any of the turbos your self cause i was gonna give it ago untill someone said i will have trouble with the oil and water lines

Robo's Mentor

Robo's

Posted
Posted
robo when you had the 2530 on what type of power were you making and what 1/4 mile times were you running ?

and have you fitted any of the turbos your self cause i was gonna give it ago untill someone said i will have trouble with the oil and water lines

1/4 times in my signature, [email protected] with the 2530 running around 19psi.

I fitted it all myself, its not too hard, Have you got the HKS neck off the turbo?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jtha7
      Replacing turbo water line - any recommendations or advice?

      By jtha7 · Posted

      Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • MBS206
      RB20DE NEO smallbox clutch.

      By MBS206 · Posted

      From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...