Jump to content
SAU Community

Custom R32 'skyline' Light-up Trick

Johnny Cash
 Share

Recommended Posts

Johnny Cash Experienced

Johnny Cash

Posted
Posted

Heya all,

I've been toying with the idea of getting a stock rear bar (R32), and having the 'SKYLINE' part of it light up at night...

I went to a custom bodykit manufacturer, and he reckons I could use a belt sander to shave the letters off from the inside, because of the indentation on the letters. Alternatively, if that doesn't work, then I might have to sit down with a die grinder and do it all VERY carefully! If i slip up just once, it will ruin the whole thing ;)

Then I would need to put a perspex sheet behind it, and seal it so its watertight. Then just run a couple of globes from the rear lights to it, so it comes on with the lights. If I angle the lights right, it should light up the entire sheet of perspex, if you all know how perspex reacts to light :D

Kind of hard to explain what I'm getting at, but if you use your imagination, I think it will be a worthwhile mod - would also give all of these used R32 rear bars a new lease on life! :D Can put all sorts of colours through it, or even use a multi-coloured neon with colour selector in the cabin.

It's bound to set one 32 apart from another, and that's what it's all about, in an age dominated by BN kits and Vertex bars. B)

I've got a few other crazy ideas on mucking around with 32s, if anyone cares to hear 'em...

Adrian.

Link to comment
https://www.sau.com.au/forums/topic/91513-custom-r32-skyline-light-up-trick/
Share on other sites
IOWNU Grand Master

IOWNU

Posted
Posted
Heya all,

I've been toying with the idea of getting a stock rear bar (R32), and having the 'SKYLINE' part of it light up at night...

I went to a custom bodykit manufacturer, and he reckons I could use a belt sander to shave the letters off from the inside, because of the indentation on the letters. Alternatively, if that doesn't work, then I might have to sit down with a die grinder and do it all VERY carefully! If i slip up just once, it will ruin the whole thing  :)

Then I would need to put a perspex sheet behind it, and seal it so its watertight. Then just run a couple of globes from the rear lights to it, so it comes on with the lights. If I angle the lights right, it should light up the entire sheet of perspex, if you all know how perspex reacts to light  :P

Kind of hard to explain what I'm getting at, but if you use your imagination, I think it will be a worthwhile mod - would also give all of these used R32 rear bars a new lease on life!  :) Can put all sorts of colours through it, or even use a multi-coloured neon with colour selector in the cabin.

It's bound to set one 32 apart from another, and that's what it's all about, in an age dominated by BN kits and Vertex bars.  B)

I've got a few other crazy ideas on mucking around with 32s, if anyone cares to hear 'em...

Adrian.

Sounds good.

Post up some pics if u manage to get it done.....

funkymonkey Grand Master

funkymonkey

Posted
Posted

you mean like this?

lit_up_arse.gif

welcome to 2002 :P

The part that lights up is a factory option that came on R32's from certain dealers in japan. It lights up slightly blue due to the EL sheet it uses. You can pull the EL sheet out (as it usually craps itself after a few years) and replace it with surface mount style LED's.

**JaR** Grand Master

**JaR**

Posted
Posted

yeah my 33's got that. lights up a bluey green color..... like so.....

and yes the cops will harass you about it, coz they did with me and thats the reason why the wire is now disconnected so it doesnt light up anymore. ;)

post-14874-1129676911.jpg

RB-Sam Enthusiast

RB-Sam

Posted
Posted (edited)

yeh i have this on my 32 but it doesnt light up as its not connected wouldnt mind gettin it to show white light

i couldnt see anyway of f*kin around with the lighting tho, but in the day looks good as you can acutally read it

Edited by RB-Sam
Johnny Cash Experienced

Johnny Cash

Posted
  • Author
Posted

Dammit! I thought I had thought up of something original! Oh well, I've got a few other crazy ideas for modding the 32 unlike anyone else's I've ever seen. Might have to keep them secret until I do it all... B)

Planning on pretty much doing a full-custom bodykit and interior, but I won't spoil the broth and spill the beans at the minute. You'll all just have to wait! :)

funkymonkey Grand Master

funkymonkey

Posted
Posted
On what grounds did they harrass you about it for??  Sounds like a load of crap to me, i can't see anything that they could possibly pick on it for...

yeah I've never had any issues with mine, as when I'm driving normally it dosen't do the knight rider thing, it just acts like a regular brake repeater and all 7 characters light up. Pretty much like a high mount brake light.

Patto- Mentor

Patto-

Posted
Posted
On what grounds did they harrass you about it for??  Sounds like a load of crap to me, i can't see anything that they could possibly pick on it for...

Any light on the back of your car needs to be red, or it can be considered defective. The same goes for the sides which have to be orange and the front has to be white.

That said I have seen a cop defect a car for having Altezza style rear lights. The guy pleaded with the cop that there was nothing wrong with it. The cop said and I quote "I'm a police officer and I say its defective so its defective."

So really they can get you anyway they want. I guess its easier to get it cleared than take it to court, which means cops can defect just about anything thats not standard.

Patto- Mentor

Patto-

Posted
Posted
altezza lights are almost always illegal. thats why they say "for off road use only" when you buy them.

factory mazda 1's are obviosuly going to be fine

Ok. I was told different. Like I said I had always thought that as long as you had red on back etc. you were fine. Especially since Altezza lights do exactly the same thing as normal lights.

funkymonkey Grand Master

funkymonkey

Posted
Posted

altezza lights are defective if they don't have red reflectors on them. Most ricer opt not to get reflectors as they're not JDM tyte enough with em on.

I guess my rear "SKYLINE" lights up red with the brakes, so that's why I don't get hassled about it.

**JaR** Grand Master

**JaR**

Posted
Posted

yeah and mine lights up like a bluey green color like in the pic.

the reason was, coz its an "aftermarket lighting feature" pretty much using the same grounds to harrass you the same way as if you had underbody neons. thats the reason i got, and yes i think its a load of shit, and am thinking i should just hook it back up again and not care, coz i didnt get fined, just asked "nicely" to have it disconnected.

and dezz yeah i will say that if i get asked about it again when i hook it back up :(:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Tape some wool onto the vent then take it for a drive I did this to my reverse cowl and was instantly unhappy, as anything over about 60kph would have the wool enter the engine bay, thus just adding underbonnet pressure and stooging my coolant stack, it did let alot of heat out when stationary though, which really didn't help once the car was moving, with the reverse cowl you could watch the coolant temps cheap up the faster you went on the hwy, I assume it would be alot worse doing track day speed With the vented bonnet (just after the radiator and about 1/3 up the bonnet) on my old R33 the wool on the leading edge sat at about a 45° angle as air poured out of it From looking where your vents are, and their size, I believe you should be fine at speed and air should be evacuated from the engine bay, I think it will be a night and day difference when stuck in traffic though for removing the trapped heat, and not sitting there cooking when parked up after driving around... #convection  Post wool tuft pics and data for science  This beastie is one nice and unique rig, enjoy
    • GTSBoy
      How much roughly to convert stock r32gtr to single high mount turbo + ecu and tune

      By GTSBoy · Posted

      It is possible to do this stuff for "cheap". But you need to be able to get deals on all the bigger items, and it really helps if you're fully capable of doing your own work. As soon as you're paying retail for new parts, or buying "kits" because you can't fabricate necessary bits and pieces, and if you really need someone else to take the reins of doing the work because you don't have the space/time/skills/confidence to  rip deep into the car and put it back together in a working fashions.....then you pay. And these days, pay means a lot of money. You'd think things would get cheaper, but they don't. They just seem to keep getting more and more expensive.
    • r32-25t
      How much roughly to convert stock r32gtr to single high mount turbo + ecu and tune

      By r32-25t · Posted

      It’s almost the price of an engine build, you won’t have anything to bolt onto it though 
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Hopefully it's enough to help with the temps! I was also only shit stirring, regarding Murphy's Law basically. I've found, what ever spare parts I have, are the parts I don't break. Ever. Also have never had issues with oil/spinning bearings until I put oil pressure gauges on the car. 😛
    • silviaz
      How much roughly to convert stock r32gtr to single high mount turbo + ecu and tune

      By silviaz · Posted

      Sheesh, isn't that the price of a full engine rebuild almost?
×
×
  • Create New...