Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Im new to the forum just got myself a kick ass Skyline GT-T R34 through jlimports.com.au the guy there james helped me out heaps every step of the way and i save myself a lot of cash, looked at getting through autoworx but i found myself saving about $1500 through these guys.

I have a few japanese housemates, and they all tell me the same thing. 80K on a car that's 10 yrs old? Extremely Rare. They agreed if the car was based in tokyo, then it would be possible, but if the car is based in the suburbs and all, it's highly impossible, the odometer would definitely be tuned. And this is comming from pple who are from Japan. I agree that there are cars with low kms, but it's rare. Most of the logbooks and stuff are faked too from what they say. So it really depends on your luck if you get a true k's or a faked k's. There's a way to tell if it's real or faked, something to do with taking out the speedos i think.

Cheers! =)

<snip>

So it really depends on your luck if you get a true k's or a faked k's. There's a way to tell if it's real or faked, something to do with taking out the speedos i think.

Cheers! =)

If the kms are wound back say a small amount, there's probably no way to tell, but if they've been wound back a lot, it's of course easier. I've been told it's quite easy to tell based on the condition of the interior. Even if they have been wound back 10,000km, it's not that much anyway.

I was talking to a guy a few weeks ago that has been importing cars for about 6 years now (and imported over 250 cars), he was saying that things like the handbrake boot on average will start to split a little at around xx,xxxkm, the steering wheel will start to show wear at xx,xxxkm, series I R33 seat bolster shows wear at xx,xxxkm, series II R33's seats wear at around 15,000km less than series I, etc etc and continued on - to give about 6 or 7 examples of how you can tell whether the km's are roughly genuine or not.

As he said, "We can tell you whether we believe that the km's are genuine, but can never be 100% certain"

As long as when I import a car, I find that the conditon of the car matches the kms, I'll be happy.

A workshop in Perth is just waiting for an inspection in the next 2 to 4 weeks and they will be able to comply R32's (1992 plus) and compliance should be priced well but a lot more work goes into a car then the 15 year rule.

Is there a differance between the 89/90/91 models and the 92 plus? besides the type-m editions etc?

just wondering for those people who get R33 compliance, what did you pay for? i know it;s around $4K plus GST, anyone find it cheaper?

it funny that people charge different price for a same model car...

i got quote for jza80 from downunder for 4.5k and my friend got it for 3.5k, may be r33 can be get it cheaper? they got 100 plates per year....

If the kms are wound back say a small amount, there's probably no way to tell, but if they've been wound back a lot, it's of course easier. I've been told it's quite easy to tell based on the condition of the interior. Even if they have been wound back 10,000km, it's not that much anyway.

I was talking to a guy a few weeks ago that has been importing cars for about 6 years now (and imported over 250 cars), he was saying that things like the handbrake boot on average will start to split a little at around xx,xxxkm, the steering wheel will start to show wear at xx,xxxkm, series I R33 seat bolster shows wear at xx,xxxkm, series II R33's seats wear at around 15,000km less than series I, etc etc and continued on - to give about 6 or 7 examples of how you can tell whether the km's are roughly genuine or not.

As he said, "We can tell you whether we believe that the km's are genuine, but can never be 100% certain"

As long as when I import a car, I find that the conditon of the car matches the kms, I'll be happy.

This is exactly what the guy at autoworx told me. I reckon the handbrake boot is a pretty good indicator, I noticed once at another prominent dealership that all their Skylines had the handbrake boots removed. The rubber on the pedals is another good indicator and also look for the timing belt service sticker.

Im new to the forum just got myself a kick ass Skyline GT-T R34 through jlimports.com.au the guy there james helped me out heaps every step of the  way and i save myself a lot of cash, looked at getting through autoworx but i found myself saving about $1500 through these guys.

JL Imports have only been a company since April this year so not exactly a company that has been around a while and I would love to have the choice of 100,000 to 150,000 vehicles in a week when I am looking for cars.

"With our service we can provide you access to 100 - 150,000 vehicles available each week at auctions all over Japan."

More "Brokers" popping now then ever and how could you save $1,500 as you could only say that if you were quoted on the same car and why was their $1,500 difference.

Who complyied your car and what did they charge.

  • 4 weeks later...

It's been a while since anyone posted on this thread, but I thought I'd let you guys know that I've just picked up a car at yesterdays auction... 1996 GTS-t Series 2, 2Dr Manual, grade 4.5... with 20,960 kms. Not one blemish on the entire body (not one single mark shown on the auction sheet), Grade B interior, Aftermarket exhaust, clutch, adjustable suspension. Should have it on the road for just over $22K

So to those people who said that you cant get a car with low kms, this is proof that you can... if you are patient. This car took 5 weeks to find which was actually quicker than I expected.

I initially had a requirement of under 50,000km so when I managed to get this I was extremely pleased, especially when it's a grade 4.5

To nelleh and everyone else - Good luck in your searching. You WILL find exactly what you want if you're prepared to wait.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • 3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
    • OK, so the weight has been bugging because it was really low. I did it again today and got a more believable answer at 1246 without driver And with a 93kg driver I'm pretty sure the car was still slightly on the quickjack last time meaning the full weight was not on the scales  
×
×
  • Create New...