Bleed Value Install Guide?

[skyr33line]

Anyone havel some tuto of install a bleed value into a skyline R33, cuz there a so much hose connecting to it.?

[Taipan]

There should be a hose on your waist gate going to the turbo install straight in the middle you might be best off getting some longer hose I installed a bleed valve in my EXA for about $20

[Mick]

does this help you out

[azn_r33]

Hey does the Turbosmart Boost Tee or any other boost contoller have to be connected to the standard boost controller??

[Damo]

What do u mean standard boost controller? If you mean the boost solenoid then no, you take it out of the system. If you mean wastegate then yes. The boost controller will be placed between the intake pipe and the wastgate and simply bleeds off pressure therefore tricking the wastegate into seeing a lower pressure and hence allowing the boost to rise.

[LANFOH]

All you need to do is find vacuum and plug it into one end and the other end goes to the wastegate, you dont need a guide to do it, its piss easy, by the way those turbotech spring and ball boost controllers you can buy of this forum for like 35$ are the best by far imo.