Jump to content
SAU Community

Recommended Posts

Hi Skliner's, what's the 411 in the....er, ..anyways..

Scenario....

You know when you've just hopped out of the 'line, you close the door after you and find the door either recoils back at you or the inside door trim gets 'dinted' from the belt buckle!!! You know about that? Does it happen to you?

Well I 5ucking hate that!! (almost as much as a poorly placed yellow sticker on my windscreen after getting pulled over, yet again!!!).

Question: Is there an adjustment to the seatbelt retractor assy that will actually see my belt go back into it's little concealed hiding place, quickly???

PS. Mine still winds up, just too slow.

Thanx for letting me get a load off!!!

Anyways, later.

<_<

Edited by superspit
i think u should oil the retractors, i need 2 take interior paneling off to get to it, plus its also connected to the ecu to adjust for an impact i think

pre-tensioner system?????????????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, back in the day..... "race" fluids, which were essentially only really "high temp" fluids, used to absorb water more readily. So they really needed to be changed more often anyway. The coincidence of that being directly necessary along with it being what racers would do as a matter of course was just fine.
    • Does the high temp fluid degrade any different over time compared to normal one? That's one thing I've always been wondering. Because a track car is going to get the fluid flushed probably way more often than every two years and will see less kilometers driven. I would think the requirements are different. I'm running Motul RBF 600 in mine. Was recommended by my mechanic before a trackday and I've stuck with it since. Hasn't seen the track since but I've kept buying and using it for servicing anyway.
    • The brakes are all stock bar some DBA slotted discs and the EBC pads and braided lines. The car has brake ducts as standard but they're kinda pointed in the general direction of the brakes rather than really getting at the heat source. I guess I should hit it with an infra red thermometer after a session and see what they're at.  100%! Its just a curiosity more than anything. As I said, high temp brake fluid was such a track day rage back in the day. From people I speak to at the track and threads on here everybody has their own take on it but I'm not gonna scoff at spending a few more bucks.    OH, a quick side question - would you use brake fluid from an opened container even if the lid has been on? Eg, if you have a bottle that you opened last time you flushed, it's been tightly closed, is it still good? 
    • Nice, is there a post with the new 4" dyno curve?
    • The brakes are all stock bar some DBA slotted discs and the EBC pads and braided lines. The car has brake ducts as standard but they're kinda pointed in the general direction of the brakes rather than really getting at the heat source. I guess I should hit it with an infra red thermometer after a session and see what they're at.  100%! Its just a curiosity more than anything. As I said, high temp brake fluid was such a track day rage back in the day. From people I speak to at the track and threads on here everybody has their own take on it but I'm not gonna scoff at spending a few more bucks. 
×
×
  • Create New...