Jump to content
SAU Community

Recommended Posts

was just seeing all the threads on different gloveboxes - i just assumed they were all the same... and mine seems different again to all the other descriptions - mine opens from BOTH sides and is full depth for CDs etc... most other people whos open both sides seem to have posted that they are very shallow... weird so many different ones!

And yeah - factory Xenons with height adjustment for the high beam, controlled by a thumb-wheel on the dash to raise or lower the pitch down the road.

Edited by Brazen
I would have thought this test (fanging on a dirt road) ineffective because of awd?

hmm, you should still be able to tell - if you can't what is the point of having one! :P I haven't been on a dirt rd in my stagea yet (it does have the lsd as it is a four S), so can't comment from experience..

Ian

Wow that is cool!!!

My centre console storage space is NO WHERE NEAR that deep, and mine only opens from the front, it is hinged at the back, so it opens up like my old r33 did.

I never knew you could get it to open up from either side, cool!

I'll take some pics of mine on the weekend :P

Thanks Nick!!

Sorry pics took so long, but as promised here it is :w00t:

post-7853-1137106967.jpg

As you can see it is only like 2 inches deep, but when you reomve it to see what is underneath, it has this MASSIVE airbag thingy box directly underneath it, dunno wether that is where is is on stock cars though....?

It's a big silver box with cuation airbag stickers all over it and heaps of wires running from it towards the front of the car, looks like it belongs there as all the mounts for it are there and it actually sits raised about 1cm off the floor pan.

I'll take some pics when I can, dont hold your breath though :(

Owned :(

Airbag thingy? Is it an airbag or what? If it is, how the hell did they do that converting to manual

It is the g-force switch(if you call it that?) that sets the air bags off in your dashboard and steering wheel

Basically when you have a accident, the switch makes contact inside from the force of the impact and off go the airbags

It's a big silver box with cuation airbag stickers all over it and heaps of wires running from it towards the front of the car, looks like it belongs there as all the mounts for it are there and it actually sits raised about 1cm off the floor pan.

I'll take some pics when I can, dont hold your breath though :P

It is the g-force switch(if you call it that?) that sets the air bags off in your dashboard and steering wheel

Basically when you have a accident, the switch makes contact inside from the force of the impact and off go the airbags

It's most likely the computer with the g-sensors, as Darrin has mentioned. Don't forget, also, that GT-Rs (and probably GTS4s) had the g-sensors under the centre glovebox, behind the handbrake, and this was used as part of the triggering functions of the ATESSA computers. Seeing as most of us have RS-Fours, then they should all have them there, whether stock or converted to manual like mine and Ska's. I haven't bothered (or had the need) to take that part of the centre console off, so I can only assume they'd be in the same spot.

Who knows, maybe the same g-sensors were used for the airbags and the ATESSA!?!?

  • 2 months later...
  • 1 month later...
hey, i tried that, and i got pinged with a $99 parking in loading zone fine, they didn't believe i was on business, which i was... lowsy parking guys

A bit OT, but since when in NSW does it matter if your private rego'd or business.

It is my understanding that any wagon, ute, van or larger LR/MR/HR vehicle can legally park in a loading zone.

Alright, ignore what I said inpost #54, the airbag computer and ATTESSA sensor are separate items...

Airbag ECU:

Stageabits015.jpg

Airbag ECU (bottom of shot) and ATTESSA sensor (top of shot) with whole console removed:

Stageabits014.jpg

ATTESSA sensor just behind the gear shifter:

Stageabits013.jpg

  • 1 month later...

I would like to add a link to this thread in the "Stagea Diy's, How To's, & Fyi's" thread here:

http://www.skylinesaustralia.com/forums/in...howtopic=102808

And then unsticky this thread, any objections?

I think this is one thread we should leave exactly as it is now, we still have a lot of people visiting this part of the forums asking questions, and having it kinda hidden away makes it harder for those who are new to Stageas and are thinking of making a purchase or doing extra research.

I think the DIY section is better for us who already own them, and know to use it as a reference point when looking for instructions, etc. when we're doing repairs and/or upgrades. For any of those types of threads, then they could be put in the one DIY section...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
    • @KinkstaahKrinkle paint the "silver" alloy, not the red filter frame Engine bay heat won't be a issue worth worrying about as the silver alloy blocks it off on 3 sides, as for the top, the bonnet seals most of it and the big OEM CAI intake snorkel is still fitted in its original position  I will head into Clark's Rubber when I have some time to grab some pinch weld to tidy up the alloy after I paint it As for performance, I honestly wasn't expecting any, the only reason I got it is because the intake noise sounds cool to my old ears when I'm feeding it the beans Sometimes it's the silly things you do in in life that gives the most fun, and I do love anything that makes cool car noises In other news: I survived 4 nights at sea with Jackie not throwing me over board, holidays are continuing now as we are currently chilling at the Beachcomber in Toukley, after taking the coast roads from Sydney in the MX5, top down all the way, Toukley is where I spent a good deal of my youth holidaying during the summer months, there's lots of reminiscing going on,  and lots of beaches and old houses to visit Next on the list is to head to Batemans Bay for a few days, but we will take the Commodore out to stretch its legs, then Commodore hasn't really moved for months
    • There’s probably people who’d like to do it and then when it comes to putting their hands in their pockets they’ll all disappear into the shadows 
×
×
  • Create New...