Jump to content
SAU Community

Recommended Posts

Hey guys im looking to purchase a stagea sometime soon, was looking at the 260RS, is there any differences between them and the autech version (brakes, suspension etc) or is it just the autech badge?

Thanks

Ok but do they have the brembo brakes or anything else GTR on them?

Or do they come with standard stagea brakes, suspension etc..

The ones i looked at didnt have the autech badge on them so i thought they may be different.

Does anyone have a 260rs that can tell me the differences, looked on heaps of sites but most of them only have the 2.5

Any problems with the import of the car?

Edited by (OO Black 33 OO)
Ok but do they have the brembo brakes or anything else GTR on them?

Or do they come with standard stagea brakes, suspension etc..

The ones i looked at didnt have the autech badge on them so i thought they may be different.

Does anyone have a 260rs that can tell me the differences, looked on heaps of sites but most of them only have the 2.5

Any problems with the import of the car?

Full GT-R running gear; engine, gearbox, rear cradle, Brembo's, 3-gauge cluster, and body tweaks by Autech.

There are a few '260RS lookalikes' out there that are non-Autech conversions. Note that all genuine 260RS' were WGNC34 RSfours that have been modified - they are body plated as being an Automatic RB25DET.

There are usually a couple for sale at about $25-$30KAUD

Full GT-R running gear; engine, gearbox, rear cradle, Brembo's, 3-gauge cluster, and body tweaks by Autech.

There are a few '260RS lookalikes' out there that are non-Autech conversions. Note that all genuine 260RS' were WGNC34 RSfours that have been modified - they are body plated as being an Automatic RB25DET.

There are usually a couple for sale at about $25-$30KAUD

That's right. Further to this (and regardless of the fact that the build plate states that the car is an automatic RB25DET), Nissan's FAST software will be able to tell you if it is a genuine Autech 260RS when you put the VIN into it. If FAST doesn't confirm it, it's not the genuine item!

  • 2 weeks later...
NOOB question, but do all stage's have attessa and HICAS or are they one in the same? just to help me clear some confusion i have, thanks scott.

Nope, Scott - only the AWD versions have ATTESA, and there are quite a few RWD Stageas here in Oz.

And only the factory manuals (RS-Four S in the series 2, and 260RS in both s1 and s2) have HICAS.

  • 3 weeks later...

hey i just read through this fourm and i saw that no1 said anything about wood grain cos mine is full of it, and also dose any1 have a 110v power point in the center console. cos i have read heaps about it and i havn't heard anything about.

i have pics aswell

post-63277-1252505901_thumb.jpg

post-63277-1252505929_thumb.jpg

post-63277-1252506042_thumb.jpg

post-63277-1252506085_thumb.jpg

hey i just read through this fourm and i saw that no1 said anything about wood grain cos mine is full of it, and also dose any1 have a 110v power point in the center console. cos i have read heaps about it and i havn't heard anything about.

i have pics aswell

I have woodgrain, but steering wheel is leather (25t x four) I also have the power outlet, I use it sometimes for the ipod with one of those powerpoint adapters you get from the supermarket

I have woodgrain, but steering wheel is leather (25t x four) I also have the power outlet, I use it sometimes for the ipod with one of those powerpoint adapters you get from the supermarket

mine is series 2 rs-v prime edition do u have full leather? 6 stacker?

  • 4 weeks later...

Hi i´m new to this forum was locking for info about the stagea as i´m considering buying one.

I most apologize if my english is bad as it´s not my native language i´m from sweden.

I have found a stagea thats converted to manual and rb 26 in japan, so i need help to what to check, before buying.

Greetings from sweden

Hi and welcome!

The price conversion is $25kAUD, which is probably pretty reasonable all things considered.

Does that badge on the tailgate say '26X Four' ? (if it does, someone's having a bit of a joke and had the badge made up)

You should check to see if a modified car such as this can be registered - it would not be possible here in Australia to import and register this particular car.

It's still running the standard non-Autech brakes (see image #7), you'd probably want to consider changing them for something better if you plan on increasing the power output of the RB26. As per other posts in this thread - look for rust around the outside mirrors and around the front strut tops. Look to see how neat the conversion is (it looks ok to me.

You will have no true indication of the distance it's travelled due to it's non-standard condition.

Tanks for the help, the car is registred and finish to use, the importer say they have papers on that the conversion in japan is in standard to a factory car, so i´ll shall check for rust and if conversion is ok, clutch gearbox diffs elektronics etc.

Brakes i can get for good price: d2racingsports brake set.

  • 3 weeks later...

wow im way confused as to what i have now??

i got a feb 2001 rs four s,its manual awd with hicas and pearl white in colour and has 17 inch wheels,they look simuler to 34 gtr wheels,full body kit incld side skirts and rear wing,as far as i can tell i have all these options i think..when i closes the rear door(boot)it makes a weired noise like somthing electric like its locking or somthing,is this the auto door close thing mentioned??,can somone tell me more about my car,i was almost convinced for a minute i had a 260rs but am minus the 26dett,i must have an autech bonnet has the sticker under the bonnet says rb26dett( the sticker for idle speed and spark plug gap etc,any info on my car would be sweet

The rear door locking/whirring is exactly what you think it is.

Idle speed anywhere around 750-800rpm will do the trick. Plug gap of 1.1mm is fine assuming your coil packs are in good nick. IF you increase the boost and the spark breaks down you can lower the gap to 0.8mm or so.

RB25DET neo run 15deg advance btdc (not the 20deg of the RB26)

You should have R34 GT-t style seat.

Larger factory swaybars vs RS4.

That is a start anyway. All you need now is to get stuck into some mods.

  • 1 month later...

Hey :nyaanyaa: i am thinking of buying a stagea in the next couple of days - My choices are buy a series 2 with basic mods or buy a series 1 with all suspension upgraded , mods and stereo etc for around the same price.... I am concerned about standard suspension in both series 1 and 2 cars and it is making me only look at models with upgraded stuff as i have heard some pretty bad reports on suspension. I don't want to spend much more money after getting the car but did not know if a series 2 is ok as (stock / zorst cooler coilpacks) I know the trans, engine and some exterior features are different between the models but is it really going to matter once you start bolting stuff on to the engine?

Any advice would be fantastic and thanks in advance

Edited by uppon2
Hey :) i am thinking of buying a stagea in the next couple of days - My choices are buy a series 2 with basic mods or buy a series 1 with all suspension upgraded , mods and stereo etc for around the same price.... I am concerned about standard suspension in both series 1 and 2 cars and it is making me only look at models with upgraded stuff as i have heard some pretty bad reports on suspension. I don't want to spend much more money after getting the car but did not know if a series 2 is ok as (stock / zorst cooler coilpacks) I know the trans, engine and some exterior features are different between the models but is it really going to matter once you start bolting stuff on to the engine?

Any advice would be fantastic and thanks in advance

Hey mate, welcome to this section of the forums!

It comes down to a few factors when choosing a car:

  • If you want a factory manual, then your choices run to a series 1 260RS, or either the series 2 RS Four-S or 260RS models.
  • What do YOU prefer, looks and features wise?
  • Which of the cars you're considering buying is in better condition overall?
  • Have you checked out and compared insurance costs to see if they'd be the same?
  • What upgrades would you like to do that aren't on either car yet?
  • Were quality parts used for the upgrades, and was the work done to a decent enough standard?
  • Have you driven either of the cars you're considering buying, and how did they feel to you?

What bad reports have you heard about the suspension?

Don't forget, these are not exactly sports cars, so you can't expect it to handle "perfectly" considering the compromises that have to come with the extra weight and practicality of it being a wagon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
    • So while the second sentence is completely correct and the whole point of the conversation, the first sentence bears consideration. If this bloke is just hoping to throw big turbos on and drive it around, because there are no helpful facilities at all in his tropical paradise** then he likely has zero chance of even knowing what the TP is on the last column in the stock maps, let alone know whether the ECU is operating anywhere near it or past it. So the point is very very moot. And, per what I said before, at stock boost on those turbos, you may well be off the end of the map. **I'm just back from Vanuatu, so I know exactly what small Pacific nations can be like wrt paradise without requisite facilities. But it's not even that simple. I put a high flow on my car and had to drive it around without a proper tune because of the lack of opportunity*** to put the bigger AFM and injectors into it to allow it to be tuned. I had to turn the boost down to less than I had before, and back off the boost controller's ramp, because it was exploring parts of the map that it didn't drive in before, and really couldn't access for tuning on the dyno either, and so was pinging. It was still well within the last column, because when I first**** set up the Nistune on the Neo I rescaled all axes of the maps to give some more space to explore. ***Family dyno was broken ****This was 13 years ago, and the TIM thing wasn't a thing then and so TP would definitely grow when pushing past the stock tune's limits.
×
×
  • Create New...