Jump to content
SAU Community

Are there any Skylines here?????


Recommended Posts

I'm in Hobart and I have an R33 GTR, there are probably 4 or 5 others here (maybe more, I don't drive around the city much). There are quite a few other R33's around.

From what I've seen, Skyline owners don't go out of their way to stay in touch with each other down here (although someone did wave at me from an R31 recently). I guess there aren't enough to make it an active community, unlike other groups.

What abt fuel, is 98 octane fuel easy to get? I was thinking to bring some Octane booster from here, but seeing the tight security measures b4 boarding the ship might cause a hassle if you bring some flammable material in your car...

2nd, any of you went to Tahune Forest Reserve (where the airwalk is), I read that it's unsealed road, can drive a RWD skyline there or better not and get a 4WD?

98 is next to impossible to get. It can be done but in your situation forget it pretty much. A few cans of booster is the best you can do.

More pressure is needed on the fuel companies and the Government. The RACT down here is no help, one of their spokesmen has been quoted as saying that high quality fuel isn't needed down here.

Tim.

I also need the following travelling times (just estimate):

1. Devonport - Deloraine

2. Deloraine - Launceston

3. Launceston - Hobart

4. Hobart - Geeveston

5. Hobart - Port Arthur

Any help will be appreciated...

My standard R33 GTR has had no problem with any 95 octane fuel I've put in it except for Caltex which has proven time and again to be utter sh!t.

I have imported some Optimax for my track car which I occasionally use to fuel the GTR.

As for the other question about travelling distances most of them would be an hour or under except the Launceston-Hobart leg which is about 2 hours. All at around the speed limit. It's not far to anywhere here. :-)

Tim.

Hey Tim,

what abt the arve river rd (I think that's the road name) going from Geeveston to the Tahune Forest Reserve Airwalk... I read from books it's unsealed road... will it be ok for a RWD coupe to pass thru? Hope 4WD not mandatory.

thx

Rianto

I haven't been to the airwalk and it'd be a long time since I've been in that area so I can't help you directly.

I have asked someone who's been there who says he thinks it's sealed all the way but isn't 100% sure. I suggest that seeing as that was his response that if it wasn't sealed it must be in pretty good nick.

Tim.

  • 2 weeks later...

mate i can give you the times as i lived in tassie for 24 years

1. Devonport - Deloraine 30 minutes

2. Deloraine - Launceston 30 min

3. Launceston - Hobart 2 hours

4. Hobart - Geeveston 45min

5. Hobart - Port Arthur 90min

if you go hope you have fun

implanning on going back hojme for 2 weeks at easter, i cant wait as i had a ricey lancer when i left. When i return im driving a R32 GTST with 190rwkw.

Originally posted by rs73

I also need the following travelling times (just estimate):

1. Devonport - Deloraine

2. Deloraine - Launceston

3. Launceston - Hobart

4. Hobart - Geeveston

5. Hobart - Port Arthur

Any help will be appreciated...

  • 4 weeks later...
Guest Method
Originally posted by rs73

Hey Tim,

what abt the arve river rd (I think that's the road name) going from Geeveston to the Tahune Forest Reserve Airwalk... I read from books it's unsealed road... will it be ok for a RWD coupe to pass thru? Hope 4WD not mandatory.

thx

Rianto

Ive been down to the airwalk, im pretty sure I had my front wheel drive lancer coupe then and it made it in and out without a hassle.

Good News for me:

Looks like I will be visiting Tasmania after all these years....

Plans are mid May 2003, I know it may not be the best season to go as it's approaching winter, and the climate may be wet and cold, but better than never go....

Bad News for me:

I won't be driving my Skyline, will be going with my old folks. We'll fly to Hobart then rent a little Lancer (I book for a manual one, hope they give me the right one, hate the autos in Lancer). From there we will be travelling around and making our way north and return to Melbourne via Launceston. But hey one of my previous car was a 93 Lancer, so I know they're pretty ok car in a manual form.

Bad News for you:

And if you think of asking "Rianto, can I borrow your 'line while you're away?", the answer is "No, not in a million years", then you say "DOH!" :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So we have most the interior back in, and for the first time with one OEM speaker hooked up. The 31 is running, driving and now tunes!!! Hahaha yet another step for the sub that sat 10m under for two weeks!!! unbelievable really 👌 lots of love work and not giving up on her. Seen so many youngsters part way less, and in way better condition. I’m stubborn, thinking another problem is just a hurdle to overcome, One at a time. IMG_9277.mov
    • That is correct. I'm using a modified ABS ring and a ZF speed sensor on my rear diff for speed input. I'm running a Haltech ecu. 
    • Been busy with the newborn. We originally thought we were going to go for a third, but we're good with two lol. He's starting to actually sleep now so I've had some energy to work on the car. It's been parked away in the garage since late November due to winter.  I went ahead and redid all my head oil drains. I originally had my front and rear head drain going into the same pipe but have since split them up. I also added an Ethanol content sensor to get ready to run E85 this summer. Tossed it on my return line. Sensor sits nicely under my intake manifold.    I also have a lot of parts that came in for my rear end. I'll be swapping over to a 3.3 final drive and doing the GK teck anti squat mod. While the rear subframe is off, I'll also change every bushing. We're planning on buying another house soon with the condition that I get at a minimum a 2 door garage, so I'll wait to have more room for this. Now onto the strange things that recently happened... After changing the lower rad hose (It had been sitting in my cabinet for well over a year and was the last hose I had to replace), I let the car idle in the garage to bleed my coolant. After running for a few minutes, it started missing. Got much worst within a minute or two and then stalled and would not restart. My crank sensor decided to crap itself. No damage, no explanation, just died. I went ahead and replaced it with another ZF sensor but the heavier duty stainless model with a shield. Tossed that in and started right up. Has anyone else seen this? I hate when things fail without cause. Luckily this was a blessing in disguise... This lead me to recheck my timing. It seems I may have had a beer or two the last time I had set my TDC angle as I was off exactly 5 degrees... I miscounted a line haha. I was running 5 degrees less then commanded. It's a little embarrassing but helps explain why my dyno operator seemed to think I should be making more then 478rwkws.        
    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
×
×
  • Create New...