Jump to content
SAU Community

Monster Cruise

MRDVS

By MRDVS,
in Archived Events

 Share

Recommended Posts

MRDVS Collaborator

MRDVS

Posted
Posted

Hows it going guys, ive just been speaking to one of the organisers from nissansilvia.com and we decided that we should post this cruise on this forum aswell.

DATE - SUNDAY 6th of NOVEMBER

TIME - FIRST MEET AT 10AM AND WILL BE LEAVING AT 11:00. So if you don't want to come real early then you can rock up closer to 11, but we will be heading out maps the whole time and leaving promptly at 11.

We have a lot of cruising to do, so I would suggest bringing a full tank of juice so that you don't run out during the cruise and have to fill up again, but we'll be going to a big variety of spots, and it will be a very very nice cruise, I hope people are up for 5 main meets with an estimated finish time of about 5 or 6pm.

If you want to come please PM me and i am happy to pm you back with the meet point.. So far from the large response there is expected over 100 cars to arrive

Hope to see you guys there

Peace :rolleyes:

Link to comment
https://www.sau.com.au/forums/topic/92130-monster-cruise/
Share on other sites
  • 2 weeks later...
32brother Community Regular

32brother

Posted
Posted

hey it's good to see heaps of us turned up! lol

Not a bad turn out for the Silvia's.

Good day for it too.

Just a reminder to anyone who's thinking of organising a cruise, drive it first or be familiar with were your going! Don't try and take 70 lowered cars up a country dirt road...

the bloke in the s5 rx-7 would have been f_cking pised off, damn nice looking rotar.

Link to comment
https://www.sau.com.au/forums/topic/92130-monster-cruise/#findComment-1693275
Share on other sites
MRDVS Collaborator

MRDVS

Posted
  • Author
Posted

The start was at doncaster park n ride... For any cruise organisers beware there is this stupid hump which was never there but is now which has spikes on it... i took my car on an angle it wasnt even that high but the blardi spikes scratched all up my side skirts grrrrrrrrrrrrr..

Link to comment
https://www.sau.com.au/forums/topic/92130-monster-cruise/#findComment-1693848
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Need AC Compressor for R32

      By GTSBoy · Posted

      The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Zabuza
      Need AC Compressor for R32

      By Zabuza · Posted

      Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • GTSBoy
      Help Understand GTT Boost Setup

      By GTSBoy · Posted

      Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • Sxnjeet
      Help Understand GTT Boost Setup

      By Sxnjeet · Posted

      yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
    • Dose Pipe Sutututu
      Daymo's Back! - R32 RB25DET NEO

      By Dose Pipe Sutututu · Posted

      Temu raptor, lol. At least the owner isn't your typical ranger danger lot
×
×
  • Create New...