Jump to content
SAU Community

Recommended Posts

Hey guys if you wanted a cheaper, say an R34 GTT coupe for around 25-30 K would it be better to import it via j spec or whichever or buy R34s that have already been brought over? Im keen on an auto R34 coupe GTT and saw on j spec site them go for as low as 22 grand (add another grand or so for hidden costs like new tyres and rego) with only 60 K on the clock and a good rating 4.

Currently I see GTT go for 28-35 K in Australia with relatively high Ks...

Comments?

Edited by Sir-D
Link to comment
https://www.sau.com.au/forums/topic/92274-importing-or-buy-local/
Share on other sites

depends if you want it tomorrow or in a few months?

this has been answered many times.. there are advantages to both in that yes imports are generally cheaper... but a car that has allready been imported can be test driven by your self

in the long run there are advantages and dissadvantages to both.. and things can go wrong equally in both types of purchases, allthough more people regard importing as more fo a gamble, however if no one did it, there would be none for people to buy locally lol

its something you should sit on and yes i think its a good idea to seek other peoples opinions and personal stories to get a good all round perspective on what to do

personally i bought locally because it was convienient for me but not nessasarily cheaper, howver i would definatly consider importing in the future and have heard good things about j-spec

there are some members on the forum who work for j-spec i belive too

just remember ... dont allways do something because its cheaper.. i have a favorite quote of mine that goes like this

"cheap and reliable wont be fast, fast and cheap wont be reliable, and reliable and fast wont be cheap" ;)

-Ruffels

Edited by Ruffels

another grand or so should be about $2k

Alarm, hidden customs costs, transporting, decent tyres, stamp duty, fm expander for radio, xenon switchover, degassing of aircon and of course even more bloody tax for on road costs (paying tax on the same car 3 times really sucks)

another grand or so should be about $2k

Alarm, hidden customs costs, transporting, decent tyres, stamp duty, fm expander for radio, xenon switchover, degassing of aircon and of course even more bloody tax for on road costs (paying tax on the same car 3 times really sucks)

most of those things are already included in the compliance cost except for tyres and rego.

most of those things are already included in the compliance cost except for tyres and rego.

there are unknown costs that arise..new customs entry system being implemented atm causing huge delays for some ...storage costs not in original budget,also allow at least $350-500 for rwc ,bar touch up etc ..this is on a grade 4 car ..lesser the grade greater the amount to be spent here,try and remember your buying cars from auction not showroom... in japan as with the rest of the world ..no one sends perfect cars to the auction

Buy localy if you can , you can see the car and its already registered , there is always a risk that you may not be able to get it complied /registered due to rust or previous damage .

Dont forget it will cost you more than the aproximate price on their website as well , for instance if you have to replace brakes , thats extra and stock items are not cheap ( you must use stock pads and rotors ).

The $4k they estimate for compliance could cost you $5 , 6 or even more .

They dont allow enough for transport , the actual boat fee may only be $1000-1100 but when you start adding , customs , q/t , tow truck , steamclean and tow truck to the steamcleaning place , it will cost over $2 k .

Tyres , you will end up with some crap asian tyres that you will throw out and they have to be stock rims and stock size tyres .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
×
×
  • Create New...