Jump to content
SAU Community

How To Clean Afm

WhatBrake

By WhatBrake,
in General Maintenance

 Share

Recommended Posts

Patto- Mentor

Patto-

Posted
Posted

Just wondering if you could help. Its slightly off topic but will help the topic starter. A mate of mine had an rb20det in which he used contact cleaner to clean his AFM as was advised to do this by his mechanic when it was running a bit rough.

Anyway afterwards it was running much worse. The mechanic tried fixing all different things but in the end they fixed the problem by replacing the AFM.

He used the right stuff in the exact way the mechanic said to use it. Although I wasn't there i'm taking his word.

So do you think the cleaning stuffed his AFM in some way and how? Anyone else had this happen? Or was it possibly the way he cleaned it or something he did wrong?

I've never cleaned one before so this is to help me, my mate and whatbrake for when he embarks on cleaning his AFM.

Link to comment
https://www.sau.com.au/forums/topic/92374-how-to-clean-afm/#findComment-1667536
Share on other sites
mammaryman Apprentice

mammaryman

Posted
Posted

Remember when cleaning airflow meters with contact cleaner to hold the can an arms length (at least) away from the afm and spray (use a fine jet spray rather than atomiser), they are VERY easily damaged even by a liquid spray and can indeed run badly after too heavy handed cleaning. To dry use a compressor again at least arms length away. A friend of mine cleaned his too vigorously and had to replace one soon afterwards :P

Link to comment
https://www.sau.com.au/forums/topic/92374-how-to-clean-afm/#findComment-1669266
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PotatoCake
      Is r33 gtr steering wheel the same as the gtst?

      By PotatoCake · Posted

      You have just offended every teenage boy in America
    • GTSBoy
      R32 GTST - 600KW+ RB28/CD009 Build

      By GTSBoy · Posted

      Structured text and other high level PLC programing languages are not allowable in Functional Safety. They are very difficult to audit. My PLC stuff is almost exclusively oriented towards Burner Management Systems which are a particularly pernicious form of Safety Instrumented System, when implemented in an SPLC. Even the part of the code written to work in the non-safety logic part of the PLC, like with a Siemens S7-1500 series, still needs to be treated as if it was safety code, with access restrictions, code fingreprints and the like. And Allen Bradley can go EABODs. They ae full of shit. They have this whole lie going on where they say if you use a ControlLogix controller and its IO, and then just duplicate the IOs (ie, run in series or parallel depending on type, to try to make it "fail safe") and "use these programming styles and place these restrictions on what you do" that you can achieve SIL2. What a load of crap. They just get away with it because no-one in the US seems to understand the first thing about Functional Safety and carries on as if all they have to do is buy only SIL2 rated equipment and hey presto, it's a SIL2 system. Idiots. /rant
    • MBS206
      Magnetic Drain Plug Snapped in Half

      By MBS206 · Posted

      If you're really considering leaving it, a great question to ask is, is the magnet going to stick to the sump? The answer to the above is the same answer towards if I'd have any level of comfort leaving it... Personally, based on the cost of a motor if the magnet were to cause damage, I'd be fishing it out either way. Use the methods in here. It fit in through the plug hole, it'll come out.   PS, get a small actuatable claw for a bore scope. OR if you know a vet, they have really cool controllable scopes with hooks on the end. Supposedly they're like playing a video game. Ask if they can acquire you one of their scopes... Engine oil after all is just a different type of lube right? Will only make it easier on the next dog or cat...
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      All other (Boolean) logic functions though, are just built on those blocks above. Which does give you a lot of functionality in logic. It is basing that on using thresholds with analogue signals like GTS alluded to.   Not having things like timers will make it less useful for some of the ramp up logic you'd want, and again, on Haltecs capacity specifically, I'm not across anymore what you can / can't do with different tables.   I'm assuming, with your logic you want to implement, not only do you want your timing safeties, you're wanting to be able to derive the duty cycle for your solenoid, to maintain I'm assuming 175PSi? Or are you using a standalone WMI controller to maintain the DC correct, and you just want the Haltech working out which fuelling maps you should be on?
    • MBS206
      Low oil pressure after WOT

      By MBS206 · Posted

      It doesn't seem to follow revs. Oddly it seems to follow TPS a little bit from what I can see, but with some delay a bit. IE end of the graph, when he lets off throttle fully, pressure drops a lot, then slowly builds back up, but rpm is on a nice cruisey drop off. I do agree though, it seems very electrically.
×
×
  • Create New...