Jump to content
SAU Community

Installing Nismo Injectors

|PRESA|

By |PRESA|,
in Engines & Forced Induction

 Share

Recommended Posts

|PRESA| Proficient

|PRESA|

Posted
Posted

I've got a set of 740cc Nismo injectors for my RB25..

Is it recommended to leave these to the pro's to install or can it be done safely and successfully by anyone mechanically minded??

The injectors do not include the o-rings so how would I know what kind of o-rings to order and what compound?

Also I'm planning to get the injectors flow tested before installing just for safety reasons, anyone know where I can get this done (preferably S E Subs - Vic) and how much??

Link to comment
https://www.sau.com.au/forums/topic/92473-installing-nismo-injectors/
Share on other sites
GTR32 Rising Star

GTR32

Posted
Posted

have you got a programmable ecu, if not don't do it because the thing won't run. the standard o rings should fit fine.

not a big job just fiddly, plug clips go flying etc and for what a mobile injector van charges i reckon it's worth it to get one in. they will probably have o rings too if you need them.

Abo Bob Grand Master

Abo Bob

Posted
Posted

The hardest thing is getting the 3 bolts underneath the plenum out. I tried to get the fuel rail out without removing the top half of the plenum and it was really close but couldn't do it.

You need a slim fit socket and short thin extension bar for it.

Apart from that pretty easy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Milkmun
      S15 Spec R

      By Milkmun · Posted

      Crazy how good the aero bar looks compared to the stock one
    • GTSBoy
      R34 engine swap Rb25de neo to s1 Rb25det

      By GTSBoy · Posted

      Yes, but you will need to rewire all the things that are different. CAS, coils, etc. Yes, but there is no IAT. What? You can use anything you like. It just has to be hooked up so that it will work.     Or are you wanting to just plug and play without having to do any thinking/work?
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      It's been a little over a decade since I bought the S15. As I did on my socials, I'll share some of my favorite pictures from over the years further below. If you haven't realised, pretty much all the pictures in my posts are ones I've taken.  In terms of updates, I don't have pictures, but I acquired a near-perfect pair of fog lights from a friend of mine, so those got swapped in for the pair I already had. As for the JZX110, I just got it back from being fixed. A few weeks back, I was on the highway when I suddenly drove over something with very little time to react. It was probably the size of a soccer ball, but it went under the car and banged into the underside pretty loudly. I pulled over and realized the fluid leaking was fuel, and of course, it was right near my exhaust. This required replacing the fuel tank. If you happen to be in the same predicament, thankfully this car shares a fuel tank with the JZS171, IS200, and IS300, so it wasn't too painful to replace. Enjoy some pictures as mentioned above, including the carnage from the fuel tank and a bonus picture I came across which shows how ridiculously shiny the Bugels are on the 110. So many more pictures I could share of the S15 but this will do for today, enjoy. 
    • luke gtr
      Howdy from the states.

      By luke gtr · Posted

      Welcome.  Was the mistake the car, or joining us? 😏
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeap, was me and the daughter getting coffee before heading to the new joint to measure up the fridge space and taking some pics that the solar installer wanted of the switch board
×
×
  • Create New...