Jump to content
SAU Community

Recommended Posts

Does anyone know what a safe psi level should be for an RB20DET before it has pinging probs.

Internally stock but has HKS T3G and a HKS fin & tube cooler from a FJ20 that's not real big. Air temp at the butterfly when cruising will stay aroung ambient temp but start boosting and it can rise to 60 degrees with ambient being 25-30 degrees.

It pings when boost is at an indicated 17-18psi if it starts getting hot.

Other mods include APEXI a/f and i/t piggy backing a standard ECU however this engine doesn't seem to have a rev limit? 9000rpm still no cut???

Has Blitz dual stage boost control, Blitz BOV, R33 GTR fuel pump, HKS pod filter and 3 inch from turbo back with N1 muffler.

I always run Optimax and used a Octane booster aswell once, but still pinging when close to 20psi. Any knowledge on this problem would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/9257-pinging/
Share on other sites

Pinging sux. Personally I would be getting the car on a dyno so they can sus it out. Pinging is caused by too much heat in the combustion chamber, which is increased by many things, compression, boost, air temp, fuel octane rating (octane rating refers to the resistance to detonation), A/F ratios, ign timing, etc.

The safest thing to do would be to turn the boost down until you can get it on a dyno. The other thing to do would be to not go putting your foot down if you have been stuck in heavy traffic, as your coola gets saturated with heat and will not cool efficiently until you get moving again - so if you have to put your foot down wait until the intake temp comes down a bit first.

Finally it is possible you may not be able to run that sort of boost with your current set up, ie insufficient intercooling, too high a compression ratio or ambient temp just too high.

If you find yourself a decent tuner, alot of your questions may be answered, until then without knowing your exact setup, it is a bit of guesswork.

Steve

Link to comment
https://www.sau.com.au/forums/topic/9257-pinging/#findComment-138810
Share on other sites

Thanks for your advise, I'm happy to know it's not some other weid prob and will defiinately keep below 14psi until I fit beter cooler and maybe fuel reg and injectors then onto dyno for tuning.

Looking forward to getting this thing out on the track soon and meeting some like minding people.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/9257-pinging/#findComment-138854
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Son, in this country, that is a piece of Gyprock. f**king drywall. FFS! I also like the autocorrect of trailer to tablet. I was reading it and thing, "what the hell drugs is he on?" Then the photo made it clear enough.
    • SO whats the deal with this issue? I've read a heap of posts from the infinity owners in the US having full engine swaps done under warranty. Most claims are done on earlier cars than 2019 but I'm sure I've come across claims of 2020 models also having this issue. I like the 400r and Q50Red/S but can't fathom dumping close to 50k on a car with terminal issues!!! 
    • The above video is working normally. That is, that's how the right hand indicator should cancel when rotating the wheel left.
    • I noticed that I could see creatures on the moon when I turned my new headlights on. I thought I should check the alignment. It's pretty rudimentary but I just grabbed some dry wall and put it against my tablet and made sure the beam was below the height on the headlights. Ie the beam is at 600mm on my car, I just made it lower than that 7.5m away.  Not the best but it'll do until I can do it properly at the local shops.   
    • As @Duncan said - the bores are most likely to cop it. But anything can and does happen. Rods are cheap. Rods are good. The work to rebuild the motor will be 30x the price of rods. You won't notice it.
×
×
  • Create New...