Jump to content
SAU Community

Recommended Posts

Tyre buldge is alrgith, as i still have abit of gap between my rear gaurds and the rim... currently running 265's and have at least 10mm gap with the rubber tucked in... 20mm different in rubber, but i guess 20mm goes both on the inside aswell as the outside in terms of sidewall buldge

why? it will look like the stupidest thing you ever saw and handle like crap. 245 is a perfect fit on a 9 inch rim. or you could go 235, or 255 any more than that is a waste of time imo.

I run 265 on a 9.5 and it looks and feels tops on the road..

http://www.sido-takushi.com/mods/enkei_nt03m/Tread.JPG

You can see it doesnt overhang and isnt too stretched... so going by what others have said a 255 is probably the max you want to go

JK

why? it will look like the stupidest thing you ever saw and handle like crap. 245 is a perfect fit on a 9 inch rim. or you could go 235, or 255 any more than that is a waste of time imo.

agreed...

i had 255's on a 10 inch wide rim, that was about right...

  • 5 weeks later...

Actually I reckon that might be overkill and effect the handling unless you change the fronts accordingly.

I was running 235/40/R18s front and 265/35/R18 rear

but on my last tyre change I decided to go to 275s at the back and for some reason which I cant quite figure out the handling isnt as good. This is on 9.5inch rim.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Honda's hybrid system can be easily scaled up to PHEVs. Series hybrid at low speeds, at higher speeds the engine directly drives the wheels but there can still be some power bled off to charge the battery + the electric motor can still provide parallel assistance too. It's really only a question of will at that point. Toyota's PHEVs are selling incredibly well at the moment because of the flexibility. You can run on EV mode when it makes sense, but if you're planning on doing a long highway drive you can still fire up the gas engine and not have to worry about dealing with the rather miserable state of public charging infrastructure.
    • Only reason to keep a MAF on your RB25 is to be able to easily calculate true VE if you know what the factory voltage curve represents in grams per second of flow. Also allows you to do things like pull the original OEM ignition + AFR target tables and use those as a starting point for your base map. Once you're well and truly done tuning though there's no need to retain the MAF.
    • Do you think they'll merge there performance divisions and we'll end up HoMo?
    • Very true, if buying new, I would not get an PP either. Minimum is an Elite 2500, which is also considered outdated. Get something that supports DBW, delete that cable throttle. Best thing I've ever done to the Skyline, next best is refreshing the A/C with a new condenser. It's cold, but not as cold as modern car, but colder than most 90s JDM shit boxes imported into Australia.
    • Haltech have a nice comparison table between the Elite and Nexus models -  https://www.haltech.com/ecu-buyers-guide/ In general, the Nexus is better. Haltech have some nice product videos on their YouTube page, I'd have a look at those and if you're still not confident what way to go, I'd give them a call. They have the best customer support of any company I've dealt with, I'm sure they'll be able to help you out. 
×
×
  • Create New...