Jump to content
SAU Community

Recommended Posts

I have just got some R34 Brembos and I am going to fit them on my GTR R33.Can anyone tell me if it is a bolt on job or do brackets need to be fabricated.I will be using 324mm discs.

I'm pretty certain that they are the same brakes - only coloured gold.

So, to answer your question, yes they should be a straight bolt on (but won't give you any advantage over R33 Brembos in good condition).

Not to mention they are the lowest spec Brembo money can buy. Evo's and Sti's have a better spec Brembo but it's amazing how much people ask for the 34 items in comparison (they are gold and R34 so must be the best) :D

I cant understand how Nissan wouldnt upgrade the braking system on their flagship performance car.

The R33 Brembos are going on my S15.When I bought the R34 Brembos,I didnt have a GTR,they were purchased for my S15,so seeing how its a bolt up job,I'll upgrade both cars at once.

Thanks for your help fellas.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...