Jump to content
SAU Community

Recommended Posts

how's the ride ? is it back jarring ?

Not even mate, extremely pleasant. You do feel feel everything, but only very slightly. On a scale of 1-10, 1 being ouch, 10 being butter, I'd say these coilovers are about a 7.

  • Replies 254
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Just bought a HDI r33 FMIC kit, from MTQ in Brisbane for $500. Was a little suss on the monsta kits and wanted to get something half decent.

Will be installing it tommorow with my mate, never done one before. Hopefully with the aid of this thread it won't be too much trouble.

Will also be installing Greddy profec B at the same time, looking forward to the outcome.

Will post pics hopefully tommorow or the next day (depending on how long it takes us ;-)

Cheers,

Dave-

howdy . notice your car has a hose coming out of the intake plumbing (the pipe before the j pipe) does your one go to the power steering pump like mine does? what did you connect it to after you put the fmic piping kit on?

Just wondering if most of you guys just blocked of this hose, like mike40sydney did in the pick below?

Or if you plumbed it back in somewhere else?

http://www.skylinesaustralia.com/forums/post-a171470-

Cheers,

Dave-

Edited by bayslideblue

Would hunt for you but I made a thread about install profec b spec II's a while ago...

Have a look but if i rember correctly yes you to block of the pipe from actuator, use one line from the cold side of ur cooler piping and then the other from? have a search i would mate but am on mobile broadband and have f all credit left ;)

I'm guess thats the Actuator Hose.. on my setup it goes to my boost controller then another hose goes to my intercooler pipeing...

It's the hose that was on the original intercooler piping, on a nipple from the top piece coming out of the plenum. But my FMIC piping doesn't have that nipple. Should I be thinking about drilling a hole in the piping to attacth it??

Or just block it off?

FMIC install went well, I'm about to start the EBC install now so I will check the other threads on that.

CHeers, guys.

Pics will be up shortly

Would hunt for you but I made a thread about install profec b spec II's a while ago...

Have a look but if i rember correctly yes you to block of the pipe from actuator, use one line from the cold side of ur cooler piping and then the other from? have a search i would mate but am on mobile broadband and have f all credit left :D

Ahh yes I see now, cheers. However your intercooler piping has a nipple drilled into it, and the pipe goes to the actuator. Where as the pipe that was atatched to my original cooler piping goes down to the powersteering pump or something down the front?

IMPORTD has a pic up of a feed from somwhere else further up the plenum, without a nipple from the cooler piping. Think I might try that.

Still not sure about this other line though?

;)

Well here's the pics, took the masa front bar off, was too low for the road trip to melbourne. and my gf was not too far off destroying it.

Ts200ASr.jpg

HDI cooler kit

Ts203IVJ.jpg

had to cut about 25mm of the reo, and mounted on an angle it clears the oil cooler by about 4-5mm

Ts206azA.jpg

blocked off the vac hose that was from the nipple to the pwsteering pump, stilll not sure where to plumb it back in?

Ts2084ir.jpg

had to cut the standard front bar on both sides where the pipes entered the cooler, but nowhere else.

Ts208vK0.jpg

made a dodgy cold box out of the stock intercooler shroud, should work alright tho. (sorry to anyone that might have wanted it)

Ts20aQUr.jpg

Job done! Haven't yet decided wether I should cut the number plate section out to get more airflow or not?

Ts20bVfi.jpg

  • 1 month later...

Has anyone had any luck fitting a front mount to a S2 Stagea with a Dayz front bar, without cutting the reo bar??

Any help would be appreciated,

Model, Size, etc, would be great.

Thankyou in advance

Has anyone had any luck fitting a front mount to a S2 Stagea with a Dayz front bar, without cutting the reo bar??

Any help would be appreciated,

Model, Size, etc, would be great.

Thankyou in advance

I really dont think ur gonna be able to one without even trimming....

I picked up an intercooler off a member from here in SA. I'm going to be buying a justjap piping kit and i was wondering if anyone knows what one it is that i use for a series 2 stag. Is it the 33 or the 34 kit.

Cheers

I picked up an intercooler off a member from here in SA. I'm going to be buying a justjap piping kit and i was wondering if anyone knows what one it is that i use for a series 2 stag. Is it the 33 or the 34 kit.

Cheers

What sort of core did you get? Also I dont think their is much difference if any with the 33 and 34 piping kit is there?

I picked up an intercooler off a member from here in SA. I'm going to be buying a justjap piping kit and i was wondering if anyone knows what one it is that i use for a series 2 stag. Is it the 33 or the 34 kit.

Cheers

Speak to the guys there they're pretty good with Stagea's these days, when i bought my cooler kit

we ended up going with R32 GTR piping and it fitted up great, alot better than my mate who bought

the same kit for his 34 with 34 piping...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...