Jump to content
SAU Community

Gb: Nismo Lanyards


Mr-Toy33
 Share

Recommended Posts

  • Replies 130
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

To start with, MYSHY32 is the one who is responsible for informing me that the product is geniun, therefore is the one who is found to be liable. As postage on most of the items ended up coming up to $3.75 or $4.25 i think it was plus $0.80 for the envelop to which i made really nothing as i was not planning to make anything from it and knowing i wouldnt make anything from these cause lanyards are not worth making money from unless you've had them made yourself by a lanyard producer/company.

gr33dy, as for you. You have sold me a used intercooler. Shall I post up the pics of the intercooler with the rocks/pebbles found in it and the scratches on top of the intercooler and the bottom of it? The pics with the pebbles/rocks in it was taken on the day i received it here at work and the officer jnr was sittin next to me at the time I was taking the pictures. the box didnt even more from out of the reception room to where it was delivered.

Even others that have seen the intercooler (approximately 4-6ppl now) have said that it is a used intercooler and i didnt even point out the scratches on the top, they noticed them before me.

as for the address. I didnt give you the wrong address. You, yourself put the '-' there, not a ','. I think I know what address to give out after 10months of giving it to people. so dont blame me for your faults.

and there is NO WAY any of those fins could of been bent with the amount of gapping between the bottom of the box you sent it in and the intercooler itself.

look at it realistically. the intercooler has been used, you've sent me a used intercooler which you've stated is brand new when clearly, ITS NOT!

ohh and shall we look at the intercooler thread? closed after i made a complaint to you that the intercooler i received was used. very sus in my opinion.

YOU ARE FAR FROM BEING A RECOMMENDED SELLER

Edited by r33skyliner
Link to comment
Share on other sites

Once again, the intercooler was sent to you brand new.

Why dont you also tell everyone I offered an exchange of the intercooler because you where unhappy but you have refused to accept.

What more can I do as a seller?

Intercooler thread was closed as I have Hybrid kits on the way.

Link to comment
Share on other sites

First off, I know that after just one day on the car, the intercooler would have marks/scratches on it, and the fins would bend. That is not the point. When you pay for something, you do so in confidence that you will receive the correct product, as was described to you before buying. I have seen it, and it is marked, and IMO those particular marks could not have been put there without it being used.

It's very hard to accurately re-sell something from someone who has told you one thing, and then turns around and tells you later on that the first lot of information provided to you was incorrect (ie. that the lanyards/hats/whatever were genuine). I think what's happening here, is an honest miscommunication. People don't really give a f*kc whether what they're buying is 'genuine'. As if half the stuff we buy nowadays is! The whole point is that you are not getting what you are TOLD you are getting. I'm totally happy with the fact that i'm buying something non-genuine, as long as I know that straight away.

Link to comment
Share on other sites

Once again, the intercooler was sent to you brand new.

Why dont you also tell everyone I offered an exchange of the intercooler because you where unhappy but you have refused to accept.

What more can I do as a seller?

Intercooler thread was closed as I have Hybrid kits on the way.

The chances of actually getting a intercooler back after the amount of shit said between us in PM's is very little and i'm not going to take my chances. I rather put the $150 (ohh yeah, minus the $30.75 you would paid to send it by normal post and again for me to send it back to you) towards a newer intercooler if I really could be bothered to now go and look for a brand new one.

After dealing with this issue. I've learnt NOT to buy a product for my car (to which, some people in this world actually have more respect for their cars if you didnt notice) unless its been fully inspected by myself which i should of inspected a intercooler before purchase.

And dont blame the fins being bent on Australia Post during postage. Like i said, with the amount of gapping between the box and the intercooler itself, its near impossible to have the cardboard even touch the fins and bend it.

Better yet. I might even get a friend to come over tonight and trial it out and see how easy it is to do.

I really doubt Australia Post would of been stupid to throw somethin that heavy around the place.

Link to comment
Share on other sites

I replied requesting that you follow it up with the bank. I've checked my bank records more then once for you Nismo Racer trying to find any payment with either your name, the reference code you've given me or even a $10.00 payment on the date you sent the money and 3 days after the payment was made incase the bank took its time to do the transactions.

No payments have been received with your name, the reference code you provided or even a $10.00 payment being received.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share




  • Similar Content

  • Latest Posts

    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...