Jump to content
SAU Community

Recommended Posts

Like any other mod, it depends on how much effort you put in to it and what your aim is. If you just stick the turbo on and wind the boost up, something's going to break sooner rather than later.

I know people who have turbocharged NA engines to good effect. The throttle response is a lot crisper than a stock FI engine, and it makes more power and torque than a NA engine.

Of course, there's a limit to the amount of boost that he could run with a NA bottom end but since they weren't chasing big power numbers the thing worked just fine.

When he pulled the engine apart again a few months later, the bottom end showed little wear and tear.

So, what do you want to do? Do you want to make the big numbers that modified RB25DET-from-the-factory people are making? Or do you just want more power than NA without losing your bottom end tractability, but also not sacrificing response?

Like any other mod, it depends on how much effort you put in to it and what your aim is. If you just stick the turbo on and wind the boost up, something's going to break sooner rather than later.

I know people who have turbocharged NA engines to good effect. The throttle response is a lot crisper than a stock FI engine, and it makes more power and torque than a NA engine.

Of course, there's a limit to the amount of boost that he could run with a NA bottom end but since they weren't chasing big power numbers the thing worked just fine.

When he pulled the engine apart again a few months later, the bottom end showed little wear and tear.

So, what do you want to do? Do you want to make the big numbers that modified RB25DET-from-the-factory people are making? Or do you just want more power than NA without losing your bottom end tractability, but also not sacrificing response?

i just want more power than NA without losing bottom end and tractability and also not sacrificing response.

is there a kit for that?

i just want more power than NA without losing bottom end and tractability and also not sacrificing response.

is there a kit for that?

Stock r34 Gt-t or else something small like a HKS gt2510 or gt2530.

But remeber when putting a turbo on an n/a engine you should do the following

1) buy turbo injectors

2) buy some-sort of I/C (can be stock or aftermarket fmic)

3) Turbo Fuel Pump (or aftermarket one)

4) Somesort of ecu (safc2 is fine or pfc is you really want to spend the money)

This 4 mods will help make the na to turbo engine much more safer. i have a friend in perth who turbo his n/a r33 using stock r33 turbo and has made just around 270rwhp (he is running abit of boost, fmic, turbo injectors, safc2, full-exhuast, air filter)

hope that helps :P

Michael :(

p.s i just remember it is also a good idea to upgrade your brakes from n/a to turbo brakes (even if its just the front)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For something like this, I'd skip just going for the cheapest, I'd find the place with the best experiences people have had, especially for restoration work. Like everything, there is upholsterers, and then there is upholsterers. Some really great upholsterers for automotive restos won't even appear to have an online presence.   My guide would be find some of the old school classic cars that have been fully restored and are immaculate, and ask the people who own them who did the work on their seats
    • Might be tricky matching the seat trim material  If your got the funds you "may" want to get the rear re-trimed as well to match the front
    • How much is it to re-uploster?  Well that's a "how longs a piece of string?" question !  And I answer thusly: "twice half its length! " . . . . . .  Seriously you'll have to chase multiple quotes for that one from different uphlostrerereres !  Ask around, in your area and on the forums, chase reviews and most of all see the finished product in person cause photoshop is a wonderful thing !
    • Hey everyone!!  I've noticed that whenever I do my oil changes, after putting 4L in, the oil level sits at the top mark in the dipstick. This is after letting the old oil drain for a very long time too! I've checked the oil level daily for the past few mornings. It happens every time and it's confusing because all the threads say that it should take about 4.7L (With some just adding the full 5L) My next thought is to figure out if the dipstick I have is correct so could someone please tell me the length of the RB25DET engine oil dipstick?  I've checked images of some of the genuine dipsticks, but none of them have the length in it. https://justjap.com/products/genuine-nissan-engine-oil-level-dipstick-fits-nissan-r34-skyline-c34-stagea-c35-laurel-y34-cedric-gloria-rb25de-t-neo?currency=AUD&srsltid=AfmBOortQXofgmiHVRKuIaiKuygL4k0Ewp68c3isGZk0vvKOJ7Yqf3iB However.... the engraving on the genuine ones say 05002 while mine says AA000. This makes me believe that maybe I have a wrong dipstick? I just want to confirm before I buy a new one. The car is a fresh import from Japan so I don't have details of the previous owner to ask him. Thanks in advance 🙏🏾 
    • Sport. I didn’t rebleed it cause I just removed the slave and left connected.    I will change line and slave and see how it goes.  
×
×
  • Create New...