Jump to content
SAU Community

R32 Gtst-4 Any Good Or What


Recommended Posts

hey fellas after owning an r33 gtst after something new, was wondering what the r32 gtst4 all wheel drive skylines are like,

Would like to now realiablitiy of them are like parts and can they take abit of abuse etc, also fuel wise what are they like any info be great guys or are the real wheel drive versions better cheers

Link to comment
Share on other sites

Expect immediate power loss if they're both stock as not only will you be competing with a smaller engine, you'll also have a heavier (than 32 gts-t) car and the extra loss through the 4WD drivetrain.

If you're planning to mod the car (to a reasonable level) then the lower power can be overcome but if you're leaving them stock I'd either keep the R33 or get the R32 Gts-t as with these levels of power (under 300bhp) the 4WD will only really be an advantage in the wet.

Link to comment
Share on other sites

GTS4's are fun, but don't expect it to be anything like a GTR. its supposed to be a GTSt that can be used in snowy areas or places where you don't want the rear wheels to get bogged down in. Spend some money on it and you'll have a fun car, but then again, you can usually spend the same amount of money and buy a GTR to start with.

Link to comment
Share on other sites

gts4's are pretty good, I had mine for 6 years before I said good bye.

Just make sure you know what you want to do with the car , i.e. power wise, and upgrading suspension etc. The gts4 uses GTR suspension and just about everything besides the engine/gearbox ratios and dif.

So if you get into upgrade mode you can easily spend the same money someone who has a GTR will with one catch, it won't sell for the price a GTR will, even after you put in all those nice GTR bits. The good thing being that a GTS4 will be cheaper to buy, and a std GTS4 will be pushed very hard to break bits that are designed for a GTR's power output.

Not to knock the car, if you are happy with potential of 200 odd kw($5-$6k- at cheapest) at the wheels with a few mods then go the GTS4. You'll love the wet weather performance and you will go looking for wet roads!

If you think you could go nuts - i.e. you need this bit now that you upgraded that bit syndrome - go the GTR. An otherwise stock GTR running 14/15 psi, k&n, 3.5inch cat back, rechipped ecu will put out about 200kw at wheels.

The GTS4's std are not slower than the GTST's, maybe if you are dragging from the lights in the dry but on a circuit its a different story, I have track times to prove that at QLD raceway. I remember a GTST which was running wider tyres than me and stock like mine and it could not pull away on the straights, although I couldn't run the same cornering lines as him due to my extra weight and narrower tyres. I had to go into the corners a bit softer but I was able to come out of them at full acceleration while the GTSt was just trying to keep it straight and get traction.

No matter which way GTS4 or GTR you will love the traction advantage!

p.s. I am thinking of getting a R34 25GT-Four next year, only 2.5 NA awd, but theres always a front cut from a stagea to make it turbo...

Edited by gts4diehard
Link to comment
Share on other sites

gts4's are pretty good, I had mine for 6 years before I said good bye.

Not to knock the car, if you are happy with potential of 200 odd kw($5-$6k- at cheapest) at the wheels with a few mods then go the GTS4. You'll love the wet weather performance and you will go looking for wet roads!

If you think you could go nuts - i.e. you need this bit now that you upgraded that bit syndrome - go the GTR. An otherwise stock GTR running 14/15 psi, k&n, 3.5inch cat back, rechipped ecu will put out about 200kw at wheels.

man are u serious that 5-6k will get u about 200kw?what mads would this include?im looking for a gts4 as well and am hopefull of getting near to 300rwhp( mads im planning to get to this hp figure:new turbo,fmic,exhaust,fuel pump and injectors,pwr fc,up the boost to about 12psi normal driving and a bit more when drifting)...am i dreaming to get these pwr figures?

Link to comment
Share on other sites

to clarify, I mean 200kw at wheels, not at engine, so your rwhp is realistic with those mods.

I think $5 - $6 k on the cheap side really.

microtech $1200~ +$500~ to tune, haven't got any mates where tune would end up less than this, always seems to need more than one attempt to get it right- especially if you like cold start and idle to work properly.

turbo - new $2000~ see horspowerinabox etc

injectors if required - $$900 - new for 6

front mount - cheapie inc pipes $700 - new

exhaust - 3 inch cat back $400 2nd hand

fuel pump $175~

boost controller $

labour costs to fit turbo, exhaust etc..

dump pipe $250

high flow cat $200~

...

of course all the same costs for a gtst too.

but need to be realistic if you want the HP, i know a few guys who ended up going the mod route and they would have been better off to save and buy a 'Good' GTR.

Stephen

Edited by gts4diehard
Link to comment
Share on other sites

I have a GTS-4 4 door with an RB26 in it (and a few other GTR bits). They can be modded to drive pretty much indentically to GTRs (almost exactly the same drive train) however they do suffer from the small engine and bogging down. I wouldn't want to compare to an R33 though, very different cars.. R32s are a lot older, expect to notice the differences in age very very quickly :D.

Link to comment
Share on other sites

i own an r32 gts4 and cant be more happy with it. im glad i went the 4wd over the rwd. though i dont have experience driving a gtst, popping the 4wd fuse is only fun for a few days, after that i put it back in and enjoyed knowing the front would kick in if needed. not saying i thrash the car, though.

as for bogging down, learn to launch and its not so bad. not saying im professional, but i find prerevving to 4000rpm and a hesitant style popping the clutch (not quite dumping, but a smooth dump? heh) will find the wheels chirp and rocket off. wet driving is great also, even my friend with a worked rb20 powered vl thinks the car is great in the wet.

i suppose everyones right though, if youre chasing a cheap gtr by modding the hell out of it, probably better to get the gtr outright. gts4 is good for traction comfort i think.

shaun.

Link to comment
Share on other sites

The GTS4 pulls well out of corners obviously and is a lot of fun to drive, it depends what you can do yourself in the modification process. People who get everyone else to do their car up are always going to be paying a lot more (labour, getting ripped off etc). If you are proficient at modifying cars and know people who can get cheaper parts the GTS4 bang for buck will be better in my opinion. The extra traction is a clear bonus and installing a switch to cut the circuit for the fuse to RWD is great fun. Obviously as with GTR's can be understeer, but with correct mods, knowledge and contacts it's a great way to go. Not to mention it's different to most R32 Skylines out there...Thoroughly enjoy mine!

Link to comment
Share on other sites

thanks for info guys been great yeah i would be mooding it over time to say roughly 200 plus rwkw its either guna be the gtst4 or an 180 but you think i can find a nice one not likely all are claped out or done to many km 180 that is.

Getting desperate for car after selling the 33 bit toey for something else :lol:

Link to comment
Share on other sites

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Oh, yeah, no arguing that the duty cycle is different. And a circuit car will go to those speeds for more distance and longer times. But, I suspect that if a tailshaft has a harmonic problem, that it would cause damage and shit itself maybe even on the first pass. A second or two of running at the resonant/harmonic problem speed is already a couple hundred revolutions.
    • Shaft speed would be the same, however it's how long they hold it there for and repeated conditions. FWIW half way down the main straight at SMSP I'm bouncing off 4th with a 8600RPM limiter. That shaft would be spinning at 8600RPM for a few seconds before I need to smash the brakes, by T2 it's getting close to that speed again. Now a drag car/roll race car would see that shaft speed for a 1 to 2 secs then they would coast, hit the brakes and that's it.
    • With same diff ratio, tyre diameter and road speed, the tailshaft rpm is the same regardless of the gearbag's ratio. Given that very quick drag cars are probably doing similar road speeds to the fastest circuit cars (circa 300 km/h), and there will be many of either category that can't go that fast and so you'd have inummerable matchups between drag and circuit car speeds at smaller numbers, and given that they are probably using rather similar tyre diameters and probably using similar diff ratios, and...where any of those numbers were different they could quite easily be in opposite directions thus cancelling out.... I think you'd find that there'd be more similarity than difference in tailshaft speed between these two use cases, no?
    • they might see those prop shaft speeds for 1 to 2 secs only 
    • A year of slogging through this bearing issue and finally fixed. What a nightmare. The oil pressure increase did not fix the problem. If you would like to read all the details in case you ever run into a similar issue visit my thread on Yellow Bullet. https://www.yellowbullet.com/threads/continuous-rod-bearing-issues.2689569/?post_id=74193031&nested_view=1&sortby=oldest#post-74193031 In the end the rod bearings themselves were the issue. I had switched from ACL (first engine) to King because that was all we could get at the time and I thought nothing of it. Put the ACL's back in after a year of taking the pan off multiple times to change many things. Issue resolved. Can't believe it was just the bearings themselves all along. It has now been about two years since I drove the car on the street or had it at the track. At some point I had installed all solid and spherical bushings in the rear but had never aligned it since it just went on and off the dyno. Alignment was the first thing to do. (Old photo but same concept) Then I took the transmission out and went through it. This was my first gearset install and I've done about 15 since this one and learned a lot and wanted to apply some of these tweaks to mine. The aftermarket shift forks take very well to some modification and I wanted to make that change. Shifts are now super smooth and no having to find the gear. I also recut the 5th and reverse shift sleeves - always wanted to try this and see how well it works. It works very well! No grinds or having to do a second attempt going into reverse and 5th is perfect. Before During After Going back in In rummaging through my spare trans parts box I found the only parts I've ever broke on a stock trans; the 3-4 shift fork - twice!  
×
×
  • Create New...