Jump to content
SAU Community

Recommended Posts

I think the first thing to check is if it is dual 2 or dual 4 ohm voice coils coz a dual four will only run at two or eight ohms thus a monobloc and a dual two will only run at 1 or 4 so probably look at a two channel and bridge it.

Just out of curiosity how much are you guys paying for the suitable jaycar amps just so i know what sort of budget you are shopping with.

W3s are hot man especially in the ported box but don't feel bad about giving it 400-500 wrms they love it as long as its clean power trust me.

Run mine in the shop (JB HiFi) in qld off a 500/1 and it is tight as. If you really want to hear it sing try a jl e1400D (if its a dual 4) and you'll never go back. If its a dual two ohm (less likely) go to JB and check the prices on coustic 600S two channels for comparison to jaycar stuff they are good for 350wrms bridged and sound great on subs especially for under $300.

Link to comment
https://www.sau.com.au/forums/topic/93516-what-amp-to-use/#findComment-1688784
Share on other sites

just to clear it up a dual 2 ohm sub will present a 4 ohm load if you run the two coils in series or 1 ohm if you run the two coils in parallel.

Same principle as wiring two single voice coil subs you can only double or half the impedance with each addition so two four ohm subs wired together will run at 2 or 8.

So the jaycar two channels are okay if the sub has two ohm coils, the audiobahn A8000T will give give 400rms at 4 ohm or 800 rms at two ohm. Mass_iv has also got dual 2 ohm subs as both subs would be wired in series to four ohms and the two subs would be wired in parallel to the amp to bring it back to two.

Link to comment
https://www.sau.com.au/forums/topic/93516-what-amp-to-use/#findComment-1693499
Share on other sites

  • 2 weeks later...
go to jaycar and get their new line of monoblocks, set you around ~$800

should be able to crunk out 800 watts RMS @ 2 Ohms, if your sub is dual 4 ohm

thats overkill for that sub, but in the future if you get a sub with higher power requirements it would be useful.

Link to comment
https://www.sau.com.au/forums/topic/93516-what-amp-to-use/#findComment-1729316
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, it's clearly an electrical problem. Either with the gauge itself, or the sender. It appears to be voltage sensitive (ie, alternator output affects the reading.
    • Yes, at this stage of SAU threads, I  automatically assume that anyone here knows that everything depends on each and every setup and its choice of parts and what an individual wants from the setup. I think your misunderstanding what I've said, I'm not saying your curve will move to the right.. I'm stating the opposite; that my setup has a much larger turbo than my last one, my current exhaust manifold runners are 2-3x longer than the last one, the intercooler is longer and thicker (hks 103mm thick), the itbs are now oversized from 45mm up to 49mm, and the plenum is now a larger Nismo plenum that's been port matched. As a result, I'm making more power, torque and boost 1000rpm earlier than my last setup. My curve moved left, in a big way. You guys with 800-1000+hp turbos should be considering hks v-cam or the other Japanese company Sakura who makes RB25 Neo vct adaptor kits for RB26's. they all make more power / boost / torque far earlier and higher peak numbers. Dahtone Racing modifies the Hks v-cam systems to his own specs and he also developed the worlds first and best dbw individual throttle body kits, to complement his V-cam. Every single car is 800-1200+hp and they all produce huge gains in response and peak power. 
    • I have a 2008 Skyline 370gt with about 160,000 km on the clock currently. A while ago, I noticed the temp gauge would start climbing but it comes down when I give it some throttle. I took it into the shops. The technicians comments are transcripted below. Reported they couldn't find anything wrong with the vehicle mechanically and they pressure tested the cooling system. Funnily enough, the technician commented that the temperature dropped back down when the car is stationary but this is when I'd notice the temp gauge to be climbing. Just wondering if anyone else experienced anything similar to enlighten me? Cos at the onset, the temps were going up one tick and then comes back down when I step on it. Now, the temps are climbing all the way to the top of the gauge, and it's making me very nervous lol. It also doesn't come down to the neutral position anymore. PS I do have a small exhaust leak near the drivers side caused by when I got f**ked by a really steep driveway at a mall I never visited before. Not sure if this would affect the sensor. Technician comments: Check and verify Fan/Cooling system - ALL OK max 106*C and fans operating at 100% Cools down right away. Checked Fan Operation - 55%@101*C, 85% @ 104*C and 100% @ 105*C Vehicle did not exceed these temperatures with max load. Temperature recovered back to 99*C after fan operation while vehicle Stationary.
    • It really depends on your setup. Mine is 'accidently' more suited to revving higher. bigger cams, turbo etc. Plus my super long first takes donkey years to come onto boost, so if it will move my power band to the right, maybe i'll pass on this. i have a G45-1500 going on there soon which I suspect might make it more of a fat pig.
    • Yeah good call, I will endeavour to tuck that down when I rewrap the looms it’s pushed up by
×
×
  • Create New...