Jump to content
SAU Community

Recommended Posts

Thats easy, Nissan Nivara speedo drive, for $22 brand new from nissan.  And the red speedo gear that comes off the R33 speedo drive.  Put them together walla, working speedo.

Hey guys...

Sorry, new here - just learning at the moment! :huh:

Just a wee question on the above:

Did a manual conversion in my car a while back, and the box came with an electronic speedo drive - does this mean i have an r33 box? and this Navara speedo drive - red speedo gear? how does this work?

SOrry for boring newbie questions!

Hey guys...

Sorry, new here - just learning at the moment!  :(

Just a wee question on the above:

Did a manual conversion in my car a while back, and the box came with an electronic speedo drive - does this mean i have an r33 box? and this Navara speedo drive - red speedo gear? how does this work?

SOrry for boring newbie questions!

Apparently one of my mates had a r32 box with an electronic speedo drive on it. So no idea. More commonly people will use a GTR speedo drive with the red gear, but at $50 second hand, the navara one is new, and cheaper.

good idea guys loving the info

quick qestion

inside the doors to do with the elec windows u have a black box.

is that the "window regulator"?

coz im was stuff and stuck on and made my battery go flat

i need a new one.....any idea what cars have the same

the window regulator is the mechanism that moves and holds the glass. i doubt it is that. it would be more like a window motor relay or somethin

David

  • 2 weeks later...
hey... does anyone know what boot latch to use??.. mine is kinda stuck and wont close... really need help cuz my car is outside and had a mini storm today...

please help :D

Hey inside the boot is a latch under the locking mechanisim, you and "flick" or WD40/gease up that and you should find any sticking might be resolved.

Sorry if it's too late.

Cheers.

i need a new coilpack harness, RB20 ones are the same in Ceffy and R32?

i've heard that apparently the pins are different, eg one has vertical facing pins while the other has horizonal facing pins eg ( = and || ). if they are indeed different and ur current plugs are in decent condition you could always cut and swap the plugs.

i actually have a r32 engine loom that i'm putting in soonish on my ceffy motor. when i pull the middle channel cover off i'll confirm if there is a difference.

Edited by skypy12

Ok quick one. For the aircon, the little motor and cog box. Is it the same to any other nissan. Im talking about the one down near your left shin. It moves the air around, you hit the button on the climate control, and the air moves.

  • 1 month later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...