Jump to content
SAU Community

Recommended Posts

  • 1 month later...
  • 2 weeks later...

hi guys, ive read through the whole thread and was wondering if anyone knew what rotors (DBA Part No would be great!!!) fit using the ceffy brake set up but using a 5 stud conversion. My mate got a 5 stud conversion kit, and wants to keep the rest of the ceffy shit there. As it stands he is just gunna drill out rotors. Does anyone know the 4 stud ceffy rotor part no??????

If anyone is interested I found out that Cefiro brake pads are also the same as the Y30 Cedric ones, for those who are too pov to afford better brakes, lol.. Like myself. :wacko:

Edited by AdMan
  • 2 weeks later...
  • 1 month later...
yea i noticed much greater pulling power when boost kicked in and esp after 5000 revs when i was finding mine was dropping off as a result of the increased boost i had, and there was no lag difference. Plus they are rated for up to 200kw ...so i figured i would try it instead of a big front mount. At the moment i dont think i will be going over the 200kw mark so i thought it was the best option for now. There are acouple of threads in the forced induction section on this.

http://www.skylinesaustralia.com/forums/in...l=r34+sidemount

http://www.skylinesaustralia.com/forums/in...l=r34+sidemount

For those interested, see below the size difference of the A31 stock coller to the R34 unit... as resin has previously mentioned, it is a straight swap, only problem I had was that needed to trim down plactic surround to account for the larger dimensions of the cooler. Overall was a cheap and simple upgrade.

post-6925-1227246431_thumb.jpgpost-6925-1227246484_thumb.jpg

Edited by skypy12
  • 3 weeks later...

Just thought I'd add this from another thread, in keeping all the useful parts information in one thread.

This is for the gas struts that hold your bonnet up.

here you go guys the savior to all your dramas yeah i was going to get regas but mine were so shagged the guy could not do it but new is better

monroe part # ml4371

Just thought I'd add this from another thread, in keeping all the useful parts information in one thread.

This is for the gas struts that hold your bonnet up.

Thanks for that info, pretty common with the ceffys. Great thread this one is too, pitty about the chit chat in here though, could be cleaned up a bit just leaving the facts

  • 1 month later...

Just converted my cef to an R33 radiator, and can confirm that it was minimal effort.

Basically you use the factory R33 mounting rubber and brackets. Then its a matter or using the factory hole for the top left bracket, and making a new hole on the radiator support for the top right bracket.

The radiator does sit a little higher than the factory jigga, but not enough to hit the bonnet. I've got my factory underbonnet padding, so it just squashes that a touch.

  • 2 months later...

Swaybars for the Cefiro specifically can be purchsed from Selbys (http://www.selbys.com.au/)

Nissan Cefiro 88-03

F Swaybar-h/duty Blade adjustable SNF702A 27mm Replacement type

R Swaybar-h/duty Blade adjustable SNR26A 22mm Replacement type

R Swaybar-X h/duty Blade adjustable SNR26CA 24mm Replacement type

  • 2 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • S2/3 GT-R is the same as S2 GTS-t The SRS airbags module in under the centre console. The S1/S1.5 GTS-t and S1 GT-R had the module built into the steering wheel. FWIW, I have a S3 GT-R wheel in my S2 GTS-t shit box. Same airbag plug, airbag light goes on then off, meaning all systems are go. S3 GT-R has red stitching, that's about it.
    • Dumb question, but why would it matter if the wheel came off a car with hicas or not?
    • Hey to anyone that reads this, long time lurker first time posting, sorry if it’s been answered before but I’ve been looking for nearly a year now for answers. ive got a 25det neo in an r32 that works awesome when it works (made 500whp on 21psi) but works 45% of the time, 1st issue there’s a harness that runs under the passengers side front fender that my tire keeps rubbing through and one wire seems to power the fuel pump even though I’ve done the relay “mod” some people like to call it, and when it does rub through it kills the car, yes next time I’m with the car I want to take the fender off and try tuck the harness well out of the way but I’d also like to try and by pass this mysterious wire as well lol, also wouldn’t mind getting power from the alternator as I’ve read it supplies the pump with 13v ? But no idea where to run the power wire too. 2nd issue, when replacing my fuel pump and fuel hanger I managed to break the factory fuel level sender leaving me with no fuel gauge, I’d like to buy the fpg fuel level sender for r32/s13 but the plug it comes with confuses me, I’ve got a detschwerks x1 fuel hanger which has light + pump - level + pump + and a ground, I’m no auto sparky but I’m wondering if I can cut the plug off the fuel level sender and wire the negative to the pump negative and wire the positive to the level positive to get a fuel gauge back ?🥴 3rd and final issue, the reason I want a fuel gauge is because whenever it’s below half a tank, it fuel starves like crazy and runs like a bag of shit even without doing a pull or sloshing the fuel round in the tank, I’d also like to fix this but have no idea what’s causing it, I’ve got a dw420 and a dead head fuel setup meaning the fuel is regulated before it gets to the engine, my only theory is that the return line is to close to the pickup on the pump and when it’s at half a tank the return line is causing the pump to cavitate enough to cause fuel pressure issues, that or the pump isn’t low enough in the tank which I would find strange considering I can’t find a single thing online about it, also if ya wondering how I figured out it happens at half a tank without a fuel gauge, I waited until it started happening and went and filled up and the car took exactly 30 litres every time I tested it, if ya managed to read through this mess I appreciate that and any recommendations , cheers
    • ChatGPT is trash and lies about things I would not expect it to lie about considering many things it's wrong about are very easily verified with google. The S3 R33 GTR shares its steering wheel with R33 GTSTs of the same production year. Part number is 48430-26U17. I'm guessing you have to get it from a car that came with HICAS though, the ER33 is 48430-26U18, but the HR33 diagrams note that part number is still leather vs 48430-26U13 which is not leather-wrapped. They all use the same airbags, so if you need another one you can get it off basically any same year R33 or Stagea.
    • I'm going to run hard lines front to back in the future. That should help dissipate a bit more heat. If not, a fuel cooler might be next 
×
×
  • Create New...