Jump to content
SAU Community

Recommended Posts

Hey guys,

As the topic states my Driver's side window is loose...when the door is shut and the window fully up it is alright but as soon as the window comes down a few inches the window rattles as the car goes through a crack/hole in the road.

Or if the window is fully down and I go to put it back up it sorta rattles itself to a start..its nothing too bad but I have been told that alot of skylines encounter this problem.

So if anyone has this problem and has a solution, any ideas would be much appreciated.

Thanks,

-Dave.

Link to comment
https://www.sau.com.au/forums/topic/93648-drivers-side-window-loose/
Share on other sites

i'll try and get onto it this week...let you's know how I went.

I had the windows tinted recently by a guy I knew, I told him to have a look around for anything which could be loose but he didnt find anything. BUT i will have a look at it asap and get back to ya's.

CheerS!

  • 2 months later...
  • 4 years later...

In regards to those two bolts, just be careful how much extra tension you put on them.

I did mine a few months back and it ended up being a little too too tight and split, and popped the roller ball out of the mechanism.

New regulator is the only fix for this :wub:

Do it a little at a time and keep checking before you put the trims back in place!

Hey guyz i tried tightenin it and the top part of the window is tight but when the window is fully down, the bottom of the window shakes.

It looks like the window has a guide inside the door and when its fully down the window has a lot of space between the guide to move about and shakes alot and its pissin me off.

anyone have a solution?

  • 10 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Anyone want to make me an offer to take my v36/g37 3.7l manual coupe in full? Off memory it was low 100k km but the battery is flat so can't tell right now. What's wrong. I had engine problem's that led to a nice clunk. It made it home but it wasn't pretty for the last few kms. Happened under revs. Sounds like bottom end.. never got around to fully checking or fixing it so the car has sat still and unregistered for a few years. Minor bump in front end set the pedestrian protection under bonnet airbag off and that was meant to be repaired, but while waiting for the repair (parts to come) I got the engine problem. The rest of the car is in decent condition. All drive line is good. All interior is good. Leather interior. Wheels in good condition and decent tyres although the ps4s are likely a little too old now it's sat still. Colour of the car is pewter off memory, the dark grey colour. In Camden NSW. Would need a tray back pickup.
    • Anyone want to make me an offer to take my v36/g37 3.7l manual coupe in full? Off memory it was low 100k km but the battery is flat so can't tell right now. What's wrong. I had engine problem's that led to a nice clunk. It made it home but it wasn't pretty for the last few kms. Happened under revs. Sounds like bottom end.. never got around to fully checking or fixing it so the car has sat still and unregistered for a few years. Minor bump in front end set the pedestrian protection under bonnet airbag off and that was meant to be repaired, but while waiting for the repair (parts to come) I got the engine problem. The rest of the car is in decent condition. All drive line is good. All interior is good. Leather interior. Wheels in good condition and decent tyres although the ps4s are likely a little too old now it's sat still. Colour of the car is pewter off memory, the dark grey colour. In Camden NSW. Would need a tray back pickup.
    • I started with the above in my head too, and I might be reading / thinking about what they want wrong, which is why I complicated it a bit further. Purpose I'm seeing is for the corner indicator to be on with headlights, and then if the indicator turns on it can still flash. The relay part above I can see working as required, except in the case of headlight is on, and indicator is on. The change over relay you've wired in would get signal from the indicator, and as it flashes would give power to the globe from the indicator, but as it flashes off, power comes from the headlight, which would cause the indicator to be constantly on when headlight is on, even while indicator change over is flashing. That is unless we don't care if it flashes or not if the headlight is on? I guess that's an OP clarification.
    • HI, Ive got an r34 gtt sedan A/T. The instrument cluster went out and I replaced it with another A/T everything visually looks the same and all the gauges work now with the exception of the speedometer and odometer. The speedo will stay pinned at zero until I'm going about 55kmh and then it'll say Im going about 5kmh. my odometer seems to be tracking at about a 1/10 of what it should. If I go 1km it'll say I've only gone 0.01. Appreciate any and all help. Ive tried searching through the forums reddit and a local fb group. The only info I think I've found is that some cars didnt come equipped with TCS (mind is) and the clusters may be different between those? I've also installed a brand new VSS and no joy obviously. TIA. 
    • what speedo healer did you use?  
×
×
  • Create New...