Drivers Side Window Loose

[\>sl33kLine</]

Hey guys,

As the topic states my Driver's side window is loose...when the door is shut and the window fully up it is alright but as soon as the window comes down a few inches the window rattles as the car goes through a crack/hole in the road.

Or if the window is fully down and I go to put it back up it sorta rattles itself to a start..its nothing too bad but I have been told that alot of skylines encounter this problem.

So if anyone has this problem and has a solution, any ideas would be much appreciated.

Thanks,

-Dave.

[kasanoff]

i've got the same issue - on both sides of the car...

interested to hear responses from ppl

i'm thinking all trimming will need to be removed and some sort of window guide(s) replaced...

[SirSkyline]

I had that in my S1 there a bolt that comes undone, pull the door trim off and you have to put the window in the right spot to do it up. You will find it

[\>sl33kLine</]

i'll try and get onto it this week...let you's know how I went.

I had the windows tinted recently by a guy I knew, I told him to have a look around for anything which could be loose but he didnt find anything. BUT i will have a look at it asap and get back to ya's.

CheerS!

[nuffsaid]

Ive got the same problem. Very interested in knowing your results.

[Cake]

Any updates on this? Having the same problem with my drivers side window...

[Lippo]

It might be the window channel rubbers are worn out.Very common to happen on cars this age.New rubbers will fix the problem.

[SL33K]

Anyone came up with a solution?

[SL33K]

Found it in another thread...

[Get EPIC]

Found it in another thread...

Gee,thanks for the link buddy

[SL33K]

lol sorry bout that.

here is the link

http://www.skylinesaustralia.com/forums/Fi...l=window+rattle

[gotRICE?]

In regards to those two bolts, just be careful how much extra tension you put on them.

I did mine a few months back and it ended up being a little too too tight and split, and popped the roller ball out of the mechanism.

New regulator is the only fix for this

Do it a little at a time and keep checking before you put the trims back in place!

[SL33K]

Thanx for the tip man.

gonna do it this weekend. not going make it too tight.

[SL33K]

Hey guyz i tried tightenin it and the top part of the window is tight but when the window is fully down, the bottom of the window shakes.

It looks like the window has a guide inside the door and when its fully down the window has a lot of space between the guide to move about and shakes alot and its pissin me off.

anyone have a solution?

[JoeAlcohol]

Really wish someone answered you about the bottom track because I'm having the same issue 10 years later and I'm not having a lot of luck on a solution.