Jump to content
SAU Community

Recommended Posts

Items: Brand new garret gt28/60, t28 flange rated at 320hp A/R ratio of 48/49

for a quick spooling rb20 or sr20 retail $1499 sell for $1000 check here for

specs http://www.turbobygarrett.com/

Now $850

z32 air flow meter $300------now250-----SOLD

Standard r33 series 1 computer (manual, turbo) $300---- now $250

standard r32 Exhaust manifold $80 ---------now $60

Set of 5 coilpacks rb20 (will not seperate) good condition, upgraded to

splitfire's, (however the rb20 standard coil packs are fouling on 15psi) anything under that is fine $200------- now $150 (this is the standarsd coil packs, not splitfires)

standard r33 AFM perfect working condition $150 --- SOLD

r33 standard air box $60 -------Now $50------SOLD

Flyn BOV (off ebay) take it off me for $30 works fine

R32 Turbo and dump with wastgate and heatsheild. perfect condition not

blowing smoke very minimal shaft play came out of a 93 gtst with102k, apparently this was the newest model turbo that the r32's came out with (out of the 3 different types)----$300

R32 Injectors cleaned and flow tested set of 6 (will not seperate) upgrade

for c18 (i think) 200 cost me $30 to clean each injector

Location:Sydney

Item Condition:everything is in good working condition

Reason for Selling: items have either been upgraded or are no longer needed

Price and Payment Conditions: price as above payment can be arranged

Extra Info:pick up prefered but will post anywhere in australia at buyers expense

Contact Details:PM or call on 0411 574 412

Edited by black sky

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...