Jump to content
SAU Community

Recommended Posts

Hey dude have you got your car working properly again?

all the probs you mention i pretty much had the same trouble. couldnt work out what it was to begin with, took her down to my mechanic (i have two!!) - who deals with performance cars all the time and he went through every possiblity of what could be going wrong, wiring, ecu , sparkies................coilpack....showing a greater heat resistance than the others.

and then about a couple of months later another one dropped on me....i knew exaclty what it was, cause it was doing exactly what happenend last time = not paying another 195 bucks for a coilpack - SPLITFIRES! a skyline's best friend!!!! no drama since.

i had lost 3 coilpacks in 6 months. :cool:

My r34 gt got the same problem. Last time when i had it checked at the mechanic (some imports experts as they said), they told me my car had ECU problem after check it with their computer (they said drive strain problems, I think) and change the spark plugs. Since it's a tiptronic non-turbo, they told me it is nearly impossible to find new ECU or aftermarket ones. They told me I have to find a half cuts or just take out the engine check light and sell it. By the way, anyone knows any trust worthy mechanics around Melbourne that can handle this job? I very appreciate if anyone let me know so I can fix my car instead of selling it. This problem is killing me for months.

Its most probably coils mate as every nissan owner goes through. (seems to happen in R34's more though) The mechanic doesnt know shite and sounds dodgy to me with his solution to your problem. READ- Never go there again!

Take it to another mechanic get them to read the error code your car is coming up with and fix the problem. If its making all the same symptoms as been stated here its almost 100% coilpacks. $650 later and your new splitfires will have solved the problem.

  • Like 1

PM sent...

i would be defintelty going and getting you car hooked up to a diagnostics computer.....this will bring up error codes. every time your engine light comes up the ecu will record the error code in its little memory thingo. when you hook it up it will come up with the code itself, and when the last time the engine light came on.

but seriously get those splitfires. saves a lot of $$$$ in the end :D

like i said before i lost 3 in 6 months. and at nearly $200 each, its so much cheaper in the long run,

when i out mine in the car ran a little too rich for a little while, but i think that was more or less that car going "OMFG!!!!!!!! these feel good!!!"" (i gained 7 kW out of them :( ) but all good now!!!!!!!!!!!!!

  • 9 months later...

lol i get the same problem!!! i thought it was my catalytic converter coz everytime i got the symbol, my car shudders, and the exhaust sounds hideous for a while before it gets back to normal. also, i hear a rattling/tinny sound which i believe has somethin to do with some part of the exhaust (cat). gonna take it to mechanic on monday and i'll let you all know what i find out lol.

lol i get the same problem!!! i thought it was my catalytic converter coz everytime i got the symbol, my car shudders, and the exhaust sounds hideous for a while before it gets back to normal. also, i hear a rattling/tinny sound which i believe has somethin to do with some part of the exhaust (cat). gonna take it to mechanic on monday and i'll let you all know what i find out lol.

bump

My 34 she is have a hard time to as soon as it shows up it just sounds all so shitting the idle all messed up. can i still drive it or do i take it in to look at right away?

with out driving her...

OK, So I drove mine last night and no issue for the first 2 drives. But after 15min on my last drive, it came up. This time the symbol came up when I gave it gas after stopping at a red light... and then I let go of the accelerator, it sounded shit for 2 seconds, then I gave it gas again and then it sounded fine... but the symbol remained

Bloody annoying

It's a simple fact, you buy an R34, you need to buy splitifres to never have this problem crop up. I'd say over 50% of R34's have this issue. It was so annoying the second I bought my second R34 I just changed them so I'd never get the problem in the first place.

Also LOL @ the mechanic mentioned above, the amount of times I've seen them say "get a new ECU" as they don't know dick about R34's

just double checking with you guys, before i get some splitfires, its the SF-DIS-008 model right? for R34 n/a sedans with rb25de?

also, where can buy them in SYDNEY (ive seen nengun.com sell it for around 500 dollars... but they don't do installation... anyone noe how much it mite cost to install?... and where?)

THANKS

Edited by CDA
just double checking with you guys, before i get some splitfires, its the SF-DIS-008 model right? for R34 n/a sedans with rb25de?

also, where can buy them in SYDNEY (ive seen nengun.com sell it for around 500 dollars... but they don't do installation... anyone noe how much it mite cost to install?... and where?)

THANKS

http://www.skylinesaustralia.com/forums/Di...ks-t192015.html

^^^very good step by step guide link to doin it yourself and save yoursefla few $$

also since i had the same problem as you i changed my coilpacks along with my new park plugs and the car's fine now :glare: also bought my coilpacks off ebay. ($500)

cheers

Edited by Alex G

Croydon racing developments have em for $495 and they charge $95 for installation... I'm just REALLY WORRIED becoz its a lot of money to be spending and... what if it doesn't solve the problem... :ermm:

OH MY GOD LOL

I got the dudes at CRD to run a diagnostics check on my ECU, and they found that it was indeed an ignition problem. They said it was either the coil packs or something called the "crank angle sensor". I couldn't be happier, I can actually FEEL the difference with the splitfires, the whole car just seems so much more vigorous!!!! lol!

ONE PROBLEM HOWEVER: they quoted me 495 + 95 labour for the splitfires, but they assumed that the RB25DE was in a similar configuration to the RB25DET, it turns out though that the N/A engine has TWO THROTTLE BODIES - WTFWTFWTF WHO KNEW THIS - compared to the Turbo which has only one, and this made the whole process twice as long, they took two hours to do it instead of 1, and had to charge me extra for the labour, and coz i got them to run the diagnostics check as well, it totalled to something around $730!!! - But I tell ya what, its SOO worth it.

SplitFire Coil Packs SF-DIS-008 = $495

2 Hours labour + diagnostics check and ECU reset = $235

damn, not only R34 owners, but EVERYONE should buy a set of these.

p.s. i felt so ridiculous rocking up there with a 4-door N/A skyline, when all the other cars you see there are r32/33 GTR's and 200sx s15's fark....

when i was going to change mine i decided to get an expert to do it because you had to remove the exhaust manifold and heaps of other crap compared to the turbo ones. but he changed them and i bought new ngk iridium spark plugs as well to put in and it runs way better.

  • 2 weeks later...
lol yeh they had almost my whole engine bay removed lol

Wow... you know you really have to be careful around some mechanics..

As soon as they figure out that you don't know much about cars they'll throw in a whole bunch of sh*t you don't need. They'll start throwing all this info and technical jargon at you to confuse you, then do some work take your money and say whoops wasn't that.. lets try again.. take more money.. and before you now it you've spent $2000 when you should've only spent $500...

You should look at really getting to know your car and it's components.. take the engine apart one weekend or when time permits. Read your car manual.

I'm not sure about the other skylines but the R34 has a fail-safe and backup for when the car sh*ts itself.

If any of the major parts of the Engine Control System fails ie. Any of the major sensors such as Engine coolant temp, mass air flow sensor etc. then the fail safe estimates the conditions the car is driven under and the back up regulates certain parts of the engine so that it can still be driven normally.

There's a useful table in your car manual (The Symptom Matrix Chart) which shows the relationship between the controls and the sensors/actuators so you can see what's actually causing the problems..

Or like MissR34 said.. get it hooked upto a diagnostics computer.. you can also trouble shoot it yourself if you have a CONSULT (a small blackberry palm pilot-looking device) .. and that will tell you what's going on. They come with a manual and you can test each part of the Engine Control and Emission System. It hooks up to a wire located on the driver's side.

Thats all I know really.. but yeh watch out for dodgey mechs...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Convert to dual filament bulb   FWIW, it will look odd - I dare say a bit dumb as it looks like your flasher relay has shit the bed.
    • If the RB20 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
×
×
  • Create New...