Jump to content
SAU Community

Recommended Posts

change oil, oil filter, spark plugs and gaped to 0.8mm, fuel filter, all fan belts, timing belt, top up fluids, air filter, change gearbox oil + diff oil, check timing and addvance it if u like, flash ur cooling system, break pads, check disks for wear.

thats all i can think of when i did a major service on my r32 gts-t when it came from japan. hope that helps u. u might want to do sum of the service urself coz if u take it sumwhere it will cost u $$$$

cheers

bill

Yea thanks heaps.. exsactly what i needed..

Big help.. Yea im gettin a freind to do my service.. and my cuzin is paying for it anyways cauz i just bought it off him and he prmiced me a major service..

lucky me ay..

i brought it off him for $7000.. I love mates rates.. lol

Thanks heaps JETR-32.. u know ur shit...

change oil, oil filter, spark plugs and gaped to 0.8mm, fuel filter, all fan belts, timing belt, top up fluids, air filter, change gearbox oil + diff oil, check timing and addvance it if u like, flash ur cooling system, break pads, check disks for wear.

thats all i can think of when i did a major service on my r32 gts-t when it came from japan. hope that helps u. u might want to do sum of the service urself coz if u take it sumwhere it will cost u $$$$

cheers

bill

What he said.

Plus

consider changing fuel pump. Old stock r32 gtst pump ~15 years old... fuel pump failure can kill your motor. just grab a walbro. Lots of the sponsors sell them.

And also spark plugs won't necessarily need replacing, just check them, if they're iridiums they're ment to last 100,000kms... :)

Also check all bushes and boots for cracking/leaking etc.

Under the bonnet. Mine is ECR33-114098

Yours should look similar.

See the fuel filter in that list? noone mentioned that one eh? I use that list as a reminder of what NOT to forget =-]

Thanks man.. i dont have VIN code yet cauz car is at a freinds shop.. but im trying to get this NISSAN FAST program.. im gettin the nissan fast torrent but for the (a1,a2,a3,b1,b2) he seems to have no bandwith left.. can u somehoe send them to me.???

I'd suggest checking all your rubber hosing eg your tophose, ours blew the other week at a freeway exit at 12am! GAH

Bleeding your brakes is also good, and our master cylinders have both gone in the last few months so watch out for brake fluid leaking on your pedals.

Don't gap your plugs to 0.8mm unless you are running more than 12 psi boost and DON'T EVER BUY A WALBORO PUMP! They suck rancid tuna salad from hippo's arses.

ALSO....read this thread - you will learn a lot.

http://www.skylinesaustralia.com/forums/in...0220&hl=service

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, there's also the gearbox crossmember which will probably be different between the small box and the big box, and the wiring loom will probably need to be modified, because the plugs for the switches etc, will probably be different. And I think the speedo on the small box R34s is from somwhere stupid, like the diff, possibly, so you'd need to work out what needs to be done about that (assuming it is different). I think the thing you need to realise is that the front end of that yoke is a large hollow tube with splines on the inside that mates with the splines on the box's output shaft. It is a dedicated thing - not available "aftermarket". They were made to suit that box, by the car's OEM.
    • You need to buy a Saab Matt, ours had a button that turned all the dash lights off. Any decent aftermarket dash has sufficient brightness control and a headlight input for day/night settings. None of which probably helps OP
    • Yeah thanks...i thought it would be alot more i dont know 😄 I saw some videos on converting push/pull and it seems you need to "drill" the hole for slave(master) cylinder and buy some converter kit. On that front yoke clip i did not even know that is a thing and i need to source that(custom shops do not do that?) But anyway thank you for the info
    • Not the headlight. It's the DRL that serves double duty as white and amber. Would be the easiest way to make it happen, if fitting a BCM was in any way an easy thing. Otherwise you'd do it with some relay logic and/or maybe some diodes.
    • Would require a very smart body control module which these cars are about 20 years to old to have 
×
×
  • Create New...