List Of Service Parts Needed R32 Gtst

[Fugi]

Kaz180 is that part listing for 32 GTS-t 1992?

[Fugi]

im running 12psi bootscan u tell me how to enter the VIN number i havent prefected it

[The Dan]

im running 12psi boots

<{POST_SNAPBACK}>

I said more than.

[Kaz200]

yep for an M spec but I'm sure they're the same

vin code: HCR32 then in next box put the serial no..

[justin911]

3lit3 32, why do u say not to run 0.8 gapped plugs if your running under 12psi ?

I said more than.

<{POST_SNAPBACK}>

[The Dan]

3lit3 32, why do u say not to run 0.8 gapped plugs if your running under 12psi ?

<{POST_SNAPBACK}>

Because the specified gap for an R32 is 1.1mm. The whole idea is to create the most gap possible for the spark to jump efficiently. If you make the gap smaller than necessary, it will decrease performance.

The only reason why you should regap your plugs to less than 1.0mm is because you have a poor ignition system or the boost levels are higher which can 'blow out' the spark, therefore you need to close the gap to make it easier for the plug to spark.

General rule.....The bigger the SPARK gap, the better the burn...as long as it can contain and maintain that spark.