Jump to content
SAU Community

Recommended Posts

A crew of us will be heading up to supernats a yearly pilgrimidge we take. Great show and good racing, all put on by a good team and of coarse Ahmed. So if anyone is heading out dont be shy to come say g'day we will be there with the dark blue FC Holden with a v8, and also a dark purple vl commo with a rb20. If any of you drag regulars are going to be there let me know so I can do the same, come say g'day!!

Cheers,

Daniel

Link to comment
https://www.sau.com.au/forums/topic/94319-supernats/
Share on other sites

I will be there to play as well

but my being at Wsid should not surprise anyone I am always there

mine will be the Red R31 with TNT sponsorship on the windshield

Edited by spx25t
Link to comment
https://www.sau.com.au/forums/topic/94319-supernats/#findComment-1706499
Share on other sites

spx25t

Seen your car doing some runs, looks cool and goes well also awesome street car you have there!!!

Old man picked up overall winner of show and go, so it was a long but good weekend, awesome event that gets better and better every year. Hopefully in the future ANDRA and WSID will actually work for there money and prepare the track properly, as alot of people we talked to said it was ridiculousy bad, people like Mark Hayes with the baby blue torana said it was the worst track they have experienced there since it opened!!!

Edited by Fitzpatrick Speed Works
Link to comment
https://www.sau.com.au/forums/topic/94319-supernats/#findComment-1711640
Share on other sites

I've been to pratically every single event WSID has ever held (except for motorbike events pfft) and I must say that the Supernats was easily the best event i've ever been to by an absolute country mile.

Their is nothing better than watching some of Sydney's best Rotors against some blown v8's running door handle to door handle. It was also nice to see some decent burnouts (compared to the lame ass wed nite attempts).

Soon as their was a problem on the track (oil down or accident etc) Ahmed was straight out into the pits hustling guys to do some big burnouts or do something crazy. That's exactly how an event should be run, none of this 30min break stuff and then cut things out (or short) because they run out of time.

The Supercruise was tops to watch, their was too much happening at once, if only I could have kept 1 eye on each end of the track I would have been happy. Their were also plenty of babes around the place (i'm hoping someone is going to post some pics up???).

The perfect leadup to the Summernats in 2mths :D

Top event, 9.8 out of 10 (loses 0.2 because it was a hot day).

Link to comment
https://www.sau.com.au/forums/topic/94319-supernats/#findComment-1712075
Share on other sites

I agree. It was defnitely the best organised event I have been to at WSID and much better than any of the other Jamboree or import drag events I have been to. There was never a break of more than 15 mins with either burnouts or other entertanment that made for an action-packed day. Well done to Ahmed and the Supernats group.

Link to comment
https://www.sau.com.au/forums/topic/94319-supernats/#findComment-1712140
Share on other sites

that bezerkly skyline looked like he strugeld to get his launch right, bogged down everytime i saw it. but looked like it had some pretty mean top end

First time racing EVER and he clocked a best of 12.2 @ 124mph! When I told him what 124mph translates to in terms of potential he freaked out a bit... lol Not bad for some well sorted bolt-ons.

Look for him at every event in the immediate future (I think the bug has bitten) :P

Adrian

Link to comment
https://www.sau.com.au/forums/topic/94319-supernats/#findComment-1713441
Share on other sites

It was a top day and what an event for his first run ever! Talk about pressure to perform :unsure: . 12.2 was a good time and 124mph is brilliant! We only got a few runs so there isnt much practise time!

It was an adrenalin filled day and night, with sunburn , laughs and snags as well....

;):D:P:D:P

awesome day, bit burnt now though.  that bezerkly skyline looked like he strugeld to get his launch right, bogged down everytime i saw it. but looked like it had some pretty mean top end

Edited by caz
Link to comment
https://www.sau.com.au/forums/topic/94319-supernats/#findComment-1714206
Share on other sites

I have to agree this years Supernats was awesome had time in between runs to head up into the grandstands and watch the big boys play little dissapointed though as the heat worked against me all day with some new Falkens I could not get anywhere near my best time.

Did have some issues though with intercooler piping though.

13.9 was the best for the day.

Had fun doing burnouts on the supercruise though

Link to comment
https://www.sau.com.au/forums/topic/94319-supernats/#findComment-1715664
Share on other sites

First time racing EVER and he clocked a best of 12.2 @ 124mph!  When I told him what 124mph translates to in terms of potential he freaked out a bit... lol  Not bad for some well sorted bolt-ons.

Look for him at every event in the immediate future (I think the bug has bitten) :P

Adrian

whats been done to it? must be putting out pretty decent power for that sort of mph

Link to comment
https://www.sau.com.au/forums/topic/94319-supernats/#findComment-1716765
Share on other sites

It was me lined up with you in the eliminator :P

I have to agree this years Supernats was awesome had time in between runs to head up into the grandstands and watch the big boys play little dissapointed though as the heat worked against me all day with some new Falkens I could not get anywhere near my best time.

Did have some issues though with intercooler piping though.

13.9 was the best for the day.

Had fun doing burnouts on the supercruise though

Link to comment
https://www.sau.com.au/forums/topic/94319-supernats/#findComment-1717339
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • @Kinkstaah yeah I initially checked with Chequered as I've used them with a previous car. But they have stopped sourcing and installing Nistune chips. They only do tuning now. I did not want to pull out my ECU and send it away somewhere to have the chip installed. That would mean no driving the Skyline  
    • Should have checked that.  On the plus side, I got my Bluetooth adaptor.
    • Each province differs a bit but we only do mandatory vehicle inspections here for heavy vehicles (Think Ford F350 and up). Those inspections are done by mechanics that are approved by the government. Besides that, it's a free for all as long as the car looks stock.  I asked because I love seeing how engineering differs from country to country. Here in Canada, all designs must be stamped and signed before they can be brought to fruition. (I.E Bridges, structures, Electrical panels, machines, literally everything shy of a wooden table) This can only be done by a professional engineer or professional engineering technologist. Both are protected titles, but the latter having more of a limited scope in what they can stamp. To become a professional engineer, you must complete a 4-5 year bachelors degree in your field of engineering, be part of an engineering order and undergo 4 years of apprenticeship, testing and mandatory continues education. Same story for engineering technologists, but a 3 year associates degree in some form of engineering technology will suffice. If you do not comply, or pretend you're an engineer or technologist, off to jail you go. If you stamp a design that fails, off to jail you go. If you stamp a design that fails and kills someone (I.E Bridge collapse) Off to jail you go for a very long time, your family will be ridiculed on the news, neighbours will surround your home with pitch forks and your dog will disown you.  Same for specialised trades... Example Electricians must undergo 1.5 years of post high school education, 4 years of apprenticeship, testing and hold proper licences. It's for the best, but then we also wonder why we're so short on engineers and tradesmen haha. We also have professional engineers who were only school smart but have no idea how a drill works. They generally go straight into management roles out of school which is also for the best. 
    • Not currently, I'm at the school where we teach people to build bridges and other fun things that involve making, or breaking things
    • I have a friend who has used Chequered Tuning and CMS. Went to CMS when Chequered had a long wait time which is kind of the norm (for good reason). Was very happy - I'm pretty sure the very simple thing you're asking will be simple.
×
×
  • Create New...