Jump to content
SAU Community

Recommended Posts

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

They are due to run out next week and have supplies arriving the week after. My dad works at the refinery....If worst comes to worst you can still use the premium unleaded (shell or bp), just don't run on high boost and don't thrash the car.....Simple.

Ok, got an update today. Shell & BP are running low on premium also. But they expect that the bit that failed will be fixed and up and running again by Wednesday. I don't think it was the compressor but it started with a C. Lol. Sorry I don't know much about machines and that kind of thing.

I asked how long it would take till we had ultimate back at the bowser and he said 1 or 2 days after they get it running. So if all goes to plan, we will have ultimate on or before the weekend. If all does not go to plan, then they have the supplies which are already on the way. So it shouldn't be too much longer *fingers crossed* all goes to plan...

from abc.net.au

BP defends delay in going public over fuel shortage

As reserves of premium unleaded fuel dry up in Western Australia, petrol

producer BP has defended its decision to delay telling motorists about

the problem.

BP supplies premium unleaded to more than 600 retailers state-wide but

has been unable to produce the fuel since a mechanical fault occurred at

its Kwinana refinery.

The breakdown occurred two weeks ago but BP only went public yesterday.

Company spokesman Peter Metcalfe says service stations are already

starting to run out.

"There's around about a dozen BP sites have run out completely and I

think in all honesty that situation is likely to grow," he said.

Mr Metcalfe has defended the time it took to alert the motoring public.

He says the company was not sure at first whether it had an issue and,

once the scale of the problem was realised, it tried unsuccessfully to

source additional supplies from overseas.

Motorists who can are being urged to switch to regular unleaded until

supplies are restored - hopefully - by late this month.

The Motor Trade Association says the fuel shortage shows there is a need

to set up fuel reserves in Western Australia.

The executive director of the association, Peter Fitzpatrick, says the

Government should stockpile fuel to help deal with any future shortages.

"We are very exposed with one refinery where you can have it break down

or get some contamination, and I think that the Government, and I've

asked them to do it, to look at it before, should have a strategic

reserve set aside for just this sort of contingency," he said.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain鈥檛 THAT bad. On take off just give a bit more throttle than you would say a coppermix and it鈥檚 fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
  • Create New...