Jump to content
SAU Community

R32 Gtr Front Driveshaft

R32 Skyline
 Share

Recommended Posts

R32 Skyline Contributor

R32 Skyline

Posted
Posted

Hey Guys,

Just after some help on removal of the R32 GTR front drivers side driveshaft. I managed to get the passengers side one out with no problems but the drivers side one appears to be a little more complicated.

Does anyone have any idea how to get this?

Any help would be greatly appriciated.

Thanks...

Link to comment
https://www.sau.com.au/forums/topic/94612-r32-gtr-front-driveshaft/
Share on other sites
blind_elk Grand Master

blind_elk

Posted
Posted

It needs to be punched.

There is a bit of a lip on the outer CV joint - you need to hook a long screwdriver or similar on there, then thump it with a big hammer, then the shaft should pop out of the diff housing.

All after removing the hub from the outer end of the shaft.

  • 3 months later...
blind_elk Grand Master

blind_elk

Posted
Posted

From memory, you can leave the brakes assembled. You need to disconnect the lower control arm from the hub, and also disconnecting the swaybar link helps as well. That allows the whole hub assembly to pivot far enough that you can pull the spline out the back of the hub.

Then remove the inner end of the shaft from the diff.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      NC MX5

      By Murray_Calavera · Posted

      I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
    • Murray_Calavera
      How "plug and play" is the Haltech Pro for R33 GTST

      By Murray_Calavera · Posted

      Ah yep. The main message I want to pass on is, try not to get scared of ghosts when thinking about knock/knock detection.  What I mean is, healthy engines make noise. Knock is also noise. Your knock sensor and ECU combo are trying to determine bad noise from good noise based on how loud the noise is. The factory knock sensors and ECU are not good at doing this.  Modern ECU's are pretty decent at it, however I'd still say that you would want to verify that if your ECU says it's knock, that you actually listen to it and confirm that it is correct.  Are you familiar with the plex knock monitor?  https://www.plex-tuning.com/products/plex-knock-monitor-v3/ I expect you're the type of person that would be very keen to play with something like this. It is great knock detection and you can pop some headphones on and listen to what's going on.  Knock that you've deliberately induced in low load low RPM areas is not really putting anything at risk and is a great tuning/learning/verification tool.  I just thought this was worth mentioning based on the way you were talking about setting up a base map and the Haltech base map settings. There are better ways to spend your time then chasing ghosts and worrying about detonation in scenarios that it is crazy unlikely to encounter it.  I was also wondering, what ECU are you planning to get? Will it be long til you pick it up?
    • Milkmun
      NC MX5

      By Milkmun · Posted

      This came quicker than I thought. It ain't even 2025 yet.
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I somehow quoted my post instead of editing it. I regret nothing.
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      STOP GOOGLING FAB9 MAKE BORG WARNER EFR KITS FOR THE NC. THEY PACKAGE AN EFR 6758. DO NOTHING ELSE. CAPS INTENTIONAL. THE BEST RESPONSIVE SETUP EXISTS FOR YOUR CAR, AND HAS BEEN PROVEN FOR QUITE SOME TIME NOW. IN B4 "BUT I WANT EVEN MORE RESPONSE, IN A SIMPLER, MORE RELIABLE PACKAGE" WHICH IS A LS.
×
×
  • Create New...