Jump to content
SAU Community

Recommended Posts

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

if you get a good one it will be quicker stock for stock than a 33gts-t, also stock for stock they handle better IMHO.

harder to work on than skylines but not too bad, with a lot of similar stuff in them. just remember most of them are a lot older than say r33's (which people seem to compare them too) so the age is the cause of a lot of things going wrong since most of them are 89-93 models. interior is also an older design when compared to an r33.

Link to comment
https://www.sau.com.au/forums/topic/95156-300zx-twin-turbo/#findComment-1721697
Share on other sites

Same as ^^^^

Mate with a 90 TT Manual

Did the 100k service on it.

Were that frustrated by the end of the 7 hour stint that we could have killed someone.

Wost car in the world to work on.

Repairs are very costly as every single part is hard to get to.

Turbos are an engine out job if you ever blew one or wanted bigger.

They are very heat happy and without sufficient cooling they over heat.

Main problem is the heat damagge that the components cop with every rtadiator fan and clutch peice i have seen on a 300 in need of replacing.

can boost to 13-14 psi by simply buying 2 $3 welding tips with a .9mm hole

The power output is crazy with very minimal mods.

Do buy a 5 speed though you wont regret trying to find one :)

With boost ,exhaust pod and safc II tune he has 338rwhp with 14 psi

Edited by Slide
Link to comment
https://www.sau.com.au/forums/topic/95156-300zx-twin-turbo/#findComment-1721738
Share on other sites

very hard to work on. Things that are basic on most cars are a pain in arse on zx's. it gets to the point where it seems like the engine has to come out to do anything. and i dont really like the look of em either :)

Edited by RRR32_GoDzIlLa
Link to comment
https://www.sau.com.au/forums/topic/95156-300zx-twin-turbo/#findComment-1721774
Share on other sites

After having a drive in a manual TT, I agree with the car's owner who said they make a great cruiser. Loads of power available, nice handling, but don't buy one and try and drive it like a WRX.

I love the cockpit. Almost as good as an R32. It was Nissan's attempt to produce a car marketable in America against Corvettes and the like.

Link to comment
https://www.sau.com.au/forums/topic/95156-300zx-twin-turbo/#findComment-1721841
Share on other sites

cons

overheating issues

biggest myth, as long as it has been even half decently looked after.....

Oh.. and although people say it's heavy, it's no heavier than a line....

former owner.... cant wait to get my hands on another.

The cons are that it's very tight engine bay. very hard to get your hand in anywhere around the block.

also you don't want to trust just anyone with repairs/mods/servicing as most people cant even find the air filter, so it will cost abit to get anything done on it.... my recomendations are Unique auto sport in castle hill, they are Z specialists, so they know what they are doing... but it will cost abit.

great car.... i've got nothing but praise for it.... check out Aus300zx.com for info on what to look out for when purchasing one....

Edited by Archie@
Link to comment
https://www.sau.com.au/forums/topic/95156-300zx-twin-turbo/#findComment-1721843
Share on other sites

What is it with people's obsession with being "different", at the expense of logic and reason?

I'm not necessarily saying that a Z32 is a bad choice, but "spending extra every time" for no appreciable gain (aside from this insecure need to be "different") just strikes me as a waste of time and money.

If you truly wanted to be different, get your hands on an R34 coupe shell and do a CA18DET conversion out of a Nissan Exa. You don't get any more different than a FWD Skyline with a 4 pot, so you can brag to all and sundry about it.

Link to comment
https://www.sau.com.au/forums/topic/95156-300zx-twin-turbo/#findComment-1722504
Share on other sites

I think that the Z32 is a nice car if you want a grand tourer. Its got plenty of poke, and its cabin is quite a nice place to spend time.

And yes, it does have a reputation for blowing things up so much that writing about all the ways in which they could fail would probably get you arrested under the new anti-terror laws.

And while yes, if its been well maintained it'll be OK but then that's true for any car. Even something as breakage-prone as a pre-Ford Jaguar will generally not shed bits if its been "maintained". The question is, if the average person owns one and treats it like a car, rather than with the loving tenderness akin to their own genitals, will it fail?

Not every Z32 was bought by people who took great care of the cars. You had a lot of mid-lifers who bought them as a status symbol rather than performance, then you had a lot of young people who had to stretch to afford it and couldn't afford to maintain it.

And, in those circumstances, the Z32 TT tends to be a lot less reliable than most. Such a cramped engine bay and all that heat adds up to mechanical and electrical failure. The cars are also getting on, and any work is a major effort.

Link to comment
https://www.sau.com.au/forums/topic/95156-300zx-twin-turbo/#findComment-1722511
Share on other sites

Freshly imported z32 5spd tt's  for 10 k comlied and registered though.

If that isnt bang for your buck i dont know what is

If the car's your typical 10-15 year old thrashed out Jap import with an unknown service history, you'll certainly get a lot of bang.

Link to comment
https://www.sau.com.au/forums/topic/95156-300zx-twin-turbo/#findComment-1722524
Share on other sites

When i was chosing a car, 300zx tt was on the list, and knowing diddley squat about cars and the such, one thing i could tell.

Pop the bonnet and look how cramped it is!

Jeeeeeze!

You can tell that if anything needs to be done, it'll be a job and a half.

On the other hand, i reckon they look fantastic! Was good to see it in Kill Bill too!

Link to comment
https://www.sau.com.au/forums/topic/95156-300zx-twin-turbo/#findComment-1722818
Share on other sites

they dont overheat, its just that the heat in the engine bay takes its toll on other components.

Reminds me of that quote from Collateral:

Max: You killed him?

Vincent: No, I shot him. Bullets and the fall killed him.

Link to comment
https://www.sau.com.au/forums/topic/95156-300zx-twin-turbo/#findComment-1723218
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Reading your posts Josh, sometimes I feel like I've gone in a time machine back to the 90's when everyone was doe-eyed and figuring things out for the first time.  I've lost track of how many single turbo GTR's I've seen on track that haven't burnt down lol. Everything has been figured out a long time ago. These things are at the point now where its essentially turn-key to go single turbo. 
    • Among other things yes. Making sure to either use an oil pressure regulator or the right restrictor size for your oil pump/range of oil viscosities you intend to run, making sure you plumb the lines correctly, turbo should be placed such that it siphons properly even when the water pump isn't turning so you don't boil coolant in the turbo after shutdown, oil return should be low resistance and also preferably picking the one that is most likely to return to the pickup as opposed to some other irrelevant part of the pan. It's far from impossible to figure this out but I have seen people really, really struggle and if that's the case it's easier to just take the path of least resistance. To me, bolt-on twin turbos are a fixed cost whereas single turbo is almost unbounded.
    • Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • Ceramic coating and heat shielding, you mean?
    • Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
×
×
  • Create New...