Need To Get Bolts For Rb Gearbox

[PHaT MR30]

Cannot find the bolts for my gearbox and i was wondering if anyone can tell me what they are so i can go down and grab some from nuts and bolts.

need them or need to know the following;

Grade, Bolt Size, Bolt Diameter, Pitch

help is greatly appreciated

tim,

[The Dan]

Cannot find the bolts for my gearbox and i was wondering if anyone can tell me what they are so i can go down and grab some from nuts and bolts.

need them or need to know the following;

Grade, Bolt Size, Bolt Diameter, Pitch

help is greatly appreciated

tim,

<{POST_SNAPBACK}>

Mate, sorry I can't be a little more helpful but this is all I could come up with after an hour searching.

The four major gearbox bolts are all the same thickness so if you can find something which screws in, then you will know. I will do some more searching until I get a chance to get my car up on the hoist at work.

[B0oStEr]

All the bolts are 10mm x 1.5 pitch.

The main 4 bolts are grade 9T.

All the others are grade 7T.

The length depends on what g/box you're using.

[Duncan]

Just head down to your local wrecker and find an R31 or a VL commonwhore

[PHaT MR30]

cheers ppl i found the 4 main bolts, as it turns out they aren't long enough for my engine stand anyway so i just gotta take em in and get longer ones....

thanks for everyones help once again, dunno what i would do with out forums like this!

[Duncan]

The best bolts for the engine stand are the crank girdle bolts, right thread and nice and long