Jump to content
SAU Community

Recommended Posts

Ok last night i meet a guy with a Stock R32 GTR also, he checked out my car and said nice I/C. I thought and still think its a std I/C

BUT.....he is convinced mine is a 97 V-spec Cooler. Because it doesnt have the lines going through it. Can any one tell the difference, which comes to my next concern, someone told me i have a Tight rear LSD because at low speeds while turning it is jumpy. others say it is std.

Link to comment
https://www.sau.com.au/forums/topic/9523-types-of-ic-off-gtrs/
Share on other sites

Judd - I'm not sure if you can tell that if your car is jumpy it is due to the LSD. but then again I'm not an expert..

Also as far as I know I didn't think theres any difference at all between the regular GTR and Vspec intercoolers. I have a HyperRev that shows all the differences in the models between Series 1,2 and 3 GTR's and the Vspecs and it doesn't mention anything about coolers....

Hi Guys from what I can tell;

* the R33 GTR I/C has one more row of tubes than an R32 GTR I/C

* the tubes themselves are slightly bigger in diameter than an R32 GTR I/C

* there are visible weld joins on the tubes, that are either not there on an R32 GTR I/C or can't easily be seen.

I have not had an R32 and an R33 I/C together in the one place at the one time. It has been a couple of years since we had the R32 GTR I/C and I have just got an R33 GTR I/C and these are the things I remember as looking different.

What I can tell you for certain is, on the flow bench, the R33 GTR I/C flows about 5 to 8% more air at 500 bhp with 1.5 psi resistance. Turning that around, it flows the same amount of air with around 1 psi less resistance.

Hope that adds to the information bank.

Sydneykid,

Your car says R32 GTST RB31DET have you got a bored out 3litre block in your R32, must be a bit of a beast!!

and nismogtsx:

The R33 keeps the RB26DETT engine from the R32 GT-R. The power is still the same with an official 280hp (206kw) at 6800rpm, although inofficially it is ass-umed to be around 302hp. Increased peak turbo-boost of 0.84bar, an improved intercooler and changed computer control parameters make for a higher torque of 375Nm (271 lb-ft) at 4400rpm. As usual, power is deployed via the 5-speed Getrag gearbox and ATTESA-ETS to all four wheels.(from http://www.infinitig35.net/R33/GTR/index.php)

so sydneykid is right!!

MEGA

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...