Jump to content
SAU Community

Gb: R33 Gts-t And Gtr And R34 Gtt Radiator Guides


Recommended Posts

you can get them anodised if you want to.

Any anodising place can do those colours in about three days go to whoa.

  • Replies 520
  • Created
  • Last Reply

Top Posters In This Topic

sry..can you do that for us Bass, I'll pay extra...I'm not really sure what anodising is...so if I sratch the pannel, will the silver bit show up, or the same colour as what I dyed..or anodised...

Hey Ppls.

Well, I checked out the guides on the R33 GTS T and GTR on the weekend and they are both perfect.

I will post details about payment and shipment and all that after I figure the shipping out and weights and all that.

For th anodising.... I'll get some quotes later this week and treat it seperatly.

BASS OUT

Hey ppls.

Well, the time has come to start collecting monies for these guides.

I have tested the guides on both the R33 GTS-T Series 1 and 2, and the R33 GTR and guess what, they are all good.

Sooooooooo........

I now need to know which suburb and state you all live in so that I can sort out freight to each of you.

Obviously the Melbournites can pick up the guides from the club meetings, but everyone else will need some freight.

So, can you all please confirm your locations and I will get freight numbers for each place and have you all pay the appropriate amount.

The guides are $80 each + freight.

Melbourne people, just put down that you will pick up, Easy.

Cheers Guys

Pete

im from melbourne, but when is the next meet? if its in march, ill probably be in QLD as im there from the 5th to the 19th....

if thats the case, ill be up for some freight as well i guess..

Pete, I am a bit strapped for cash this fortnight so can you please put one on hold for me and we can sort out cash in 2 weeks.

I am located on the Gold Coast QLD, 4212

Let me know what postage will be, these should be able to be sent through auspost btw :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...