Jump to content
SAU Community

Gb: R33 Gts-t And Gtr And R34 Gtt Radiator Guides


Bass Junky
 Share

Recommended Posts

Hey ppls.

I'm extremly sorry about delay with group buy.

I've had a lot of life changes in the mean time but I digress.

The R33 Series I, Stag Series I, R34 GTT (all) guides are all being cut at the moment.

I have the cardboard boxes for freight in the factory and I will begin making them up shortly.

The R33 Series II guides are STILL not finalised but I'm doing some grinding on it today and I need somebody who can come ot Dandenong to trial fit it. I'd come to you, but I need to use a grinder to make any mods and the factory here has all that stuff.

The Stag Series II guide sample will be send out to two guys in Canberra to fit to their car and try it out. I think it should be pretty good, but it may need some slight re-modelling.

Again, I'm super sorry about the delay, but understand that I will supply each and every one of the guides as soon as I can.

I thought I'd be able to finish them a lot faster than I have. I've had a lot of stuff go on in the last few months. It's been crazy.

Yours in total apology

BASS

Link to comment
Share on other sites

  • Replies 520
  • Created
  • Last Reply

Top Posters In This Topic

Hey ppls,

Just got the phone call and went and picked up the blanks.

So, I have all the Series II Stags, the Series I R33, all the R34 guides in the back of my car.

I'll be testing a revised R33 Series II guide on a car on the weekend and a Series II Stag also.

The end of this group buy is nigh. Finally. :S

Cheers

BASS OUT

post-6399-1158282467.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Hi Guys.

Again, I sorry about the delay. I have not stopped on this bloody project.

I took the guides to a plave near here last week and went back a few days later and they then told me they couldn't do it because they are too busy and blah blah blah.

So shortly I'm going out to find antother person.

I'm also playing with Dezz's car tomorrow.

Stay tuned.

Link to comment
Share on other sites

TOP NEWS PEOPLES

I have finally trail fitted the R33 GTS-T Series II guide to Dezz's car and lo and behold, it's spot on!

A very minor adjustment to an angle and she's apples!

I'll be sorting out hte order to the laser cutters on the next day or two and then away we go.

THANK YOU EVER SOO MUCH FOR YOUR PATIENCE.

Bass Out

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share




  • Similar Content

  • Latest Posts

    • Having not watched the videos, I'm unsure, but this may be better suited to the importing thread?
    • Update on this situation: (Forgot to put in my previous post that I bought another brand new pressure gauge and fuel shows the same 50psi) I've deleted all the aftermarket immobilizers and turbo timer shyt and placed all factory wiring back to normal. The problem is still the same and nothing changed, but atleast it's a bit more tidier under the steering wheel. I've also siphoned out all the old fuel and then poured new batch of BP98 fuel (about 15L) into the tank. Nothing changed. Still the same idle. I also changed out the MAP vac line with a new one and, still the same.  So 2 days ago, I thought fk it. I'll just change out the fuel rail and injectors with another set that I know worked well in my brother's R34 a while back. That other fuel rail has the exact same Xspurt 640cc as what I have right now. So I changed it out to that other fuel rail and injectors (new O-rings) and injector harness. Put everything back together, started the engine, 464906286_1624569924763105_5179888796065901094_n.mp4   and yeah... still the same 50psi and idle problem. 🫠 I can also hear each of injector's solenoids running when I put a screw driver to it and have the other end to my ear. I might get a noid light just to confirm pulsasion but yeah, very strange that both fuel rails and injectors put out 50psi.  31-10-2024.csv I've attached it here. I started recording, then started the engine and let it idle with no throttle, then at the end I applied a little throttle and then stopped recording.    So, now idk. I'm going to see if swapping out the brand new R35 coils to my old splits fires will change anything. 🤷‍♂️
    • Hey mate, nice work on the car. Just a quick note, people generally don't like it when you use the forums to dump and run to advertise your YouTube content. If you're gonna stick around and join in the conversation then great, but if not this might not be the best place for you.  
    • Here is the 'How to' video on importing a car from Japan:    
    • Hi all,   I have bought a JDM R35 at auction in Japan.  This is my second JDM GTR after owning one back in 2009.  I have made a couple of videos that may interest some forum members.  One is collecting the GTR from the compliance shop (and seeing it for the first time) and another on the process of buying and importing a car from Japan.  I'm new to this and would appreciate your thoughts, as well as a subscribe!    
×
×
  • Create New...