Jump to content
SAU Community

Gb: R33 Gts-t And Gtr And R34 Gtt Radiator Guides


Recommended Posts

Hey ppls.

Okay, here's the state of play.

I'm currently in the middle of boxing up all the Series I R33 and Stags and R34s.

Bubble wrapping and boxing up.

I inspected the Series II R33 and Stags this morning and they are now off getting powdercoated. I expect to pick them up early next week, maybe Monday or Tuesday. Then I'll be boxing them up also.

Almost there ppls.

I'll post up some pics when I get the second batch of guides.

;) ;)

BASS OUT

Anything happening yet? I did not select to have my series II guide powder coated, does this mean it will be sent out now?

  • Replies 520
  • Created
  • Last Reply

Top Posters In This Topic

Hi Guys,

I'm picking them up from the Powdercoaters tomorrow (subject to work commitments) and should be able to box them up this week and send out.

not long now.

I WILL have them done before Christmas.

Hi Guys,

I'm picking them up from the Powdercoaters tomorrow (subject to work commitments) and should be able to box them up this week and send out.

not long now.

I WILL have them done before Christmas.

Hey Bass, whats the status with my anodized guide...is that ready as well?

Hey ppls.

I'm boxing up all the remaining guides tonight after work.

YAY!

you WILL get them before Christmas. Unless you live on a sheep station, then you are in trouble!

Pictures after work.

BASS OUT!

Here they are all finished.

I just packed a crap load more guides.

90% of the guides to be shipped are bubble wrapped, boxed up and due to leave tomorrow.

The other 10%, well, I ran out of tape!!

The Engraving plates are being dropped off tomorrow morning on the way to work and the Red Ano plate I'll drop off tomorrow in Dande at some stage.

Thanks for your patience ppls. Santa has come early!

BASSSSSSS OUTTTTTT

post-6399-1166081985.jpg

Hey guys.

Okay, most of the guides for shipping have been sent.

I will PM people who's guides havent.

Finally, they are out the door.

Here's a pic of the fun I had boxing them up :S

post-6399-1166162469.jpg

Hey ppls.

I will be at the SAU final meeting tomorrow night (Tuesday 19th December) and will have them with me there.

If you want em, come get em.

If you can't make it, I'm sure we can figure something out.

BASS OUT!

PS.

If anybody is interested I have the following spares.....

2 x R33 GTS-T Series I without top slots. Bare Aluminium

3 x R33 GTS-T Series II. Powdercoated Black

1 x R33 GTR Series III (will also fit other series with slight modification). Powdercoated Black

2 x Stagea Series I with scoop. Powdercoated Black

3 x Stagea Series II with scoop. Powdercoated Black

1 x R34 GTT standard front bar. Bare Aluminium

Same price, same delivery.

bass I want one for a r33 95 gtst so in this case I assume a series 1. can you explain what you mean by without the top slots. also whats the final price inc postage and pm your details i will shot some money your way

Wessa,

The delivered price is $100 in bubble wrap and a custom box to suit.

The slots at the top are the pieces removed to suit the Air con fan and bonnet stay rod.

Cheers

Pete

Hey Guys.

I'm so glad that you are enjoying your guides.

I really do apologise for the long manufacture time. I've had a lot of stuff going on in the last several months, some of which are still happening, but that's another story.

I hope that the guides bring you many hours of air pushing fun and games.

If you like, a trader rating would be nice.... I don't mind if you mention the lateness, but also please mention the quality.

That's half the reason the guides were such a long time in the build because I wanted to get them just right.

I replaced the R33 Series I guides which weren't perfect from the last buy, so I think I've done the right thing.

As all the designs are right now, the next group buys won't be anywhere near as stressful. :)

Anywho.

Thanks again for your patience.

BASS OUT!

PS.

If anybody is interested I have the following spares.....

2 x R33 GTS-T Series I without top slots. Bare Aluminium

3 x R33 GTS-T Series II. Powdercoated Black

1 x R33 GTR Series III (will also fit other series with slight modification). Powdercoated Black

2 x Stagea Series I with scoop. Powdercoated Black

3 x Stagea Series II with scoop. Powdercoated Black

1 x R34 GTT standard front bar. Bare Aluminium

Same price, same delivery.

PM sent :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • That's it. Too rich for me. I'm out. If it does start to sell in pieces, I'll probably register an interest in the diff & axles, gearbox & tailshaft, and maybe the brakes.
    • I tried my best, well I see how it is though... It's time to be ruthless! I'll up my bid with a JVC sub and an amp to run it, 8 stainless steel drink coasters with a rubber backing, and a photo of Tom Cruise. Oh, I can increase the cash portion by 20 cents if that helps. 
    • Or if it's grey, is it watery? Does it do it after you've been for like an hour long drive it will still do it, or just near the start of the trip? As GTS said, does it seem like oil (blue), water (white/grey) or fuel (black)? Sometimes the colour can be hard to see clearly too for what it is, as GTS says, what's it smell like?
    • I wonder if part of it has to do with when you've each bought the kits. I honestly have the feeling that the silicon joiners in the 2000s were actually better quality than most of what you can find these days. Even in the same brands. Everyone racing to the cheapest price while still trying to make profit means lower quality parts. For coolant, I personally would be going with rubber, OR, converting the radiator and engine to use the huge AN fittings hose for radiators.
    • If shift solenoid A is bad, that explains limp mode --- now you're in the same position as I mentioned previously, in that the next step is to confirm loom/wiring integrity from TCU to gearbox connector with a multimeter (the TCU cannot detect a broken wire, which can happen ..ie; rodent damage, loom rubbed through)...and then finally measure resistance (at the gearbox connector) for shift solenoid A ... ...once you confirm shift solenoid A is bad (open circuit, really low or greater than 40ohm resistance), then it's a job ; you have buy a complete solenoid set, get under the car and drop transmission oil pan, and remove valvebody assembly (the solenoids sit on top), replace solenoid set, and reassemble....it's not exactly a fun task, but readily doable.
×
×
  • Create New...