Jump to content
SAU Community

Opinions Please


Beeble
 Share

Recommended Posts

I'm seriously considering throwing some $$$ into my car.

Been doing a LOT of reading, and i've pretty much settled on this list of goodies.

Car at the moment has stock ECU and stock turbo/cooler, as in sig.

Engine appears to be healthy, it's just clicked over 100,000 and had all belts/pump replaced etc etc.

1) Z32 AFM ~$250-300 2nd hand

or $400 new Nengun

2) Genuine Hybrid FMIC with piping $800 autospeedbits.com.au (delivered)

or $700 no-name with piping justjap.com (delivered)

3) Apexi Power FC $950 group buy SAU

or $1050 Racespec

or $954 Nengun

4) Injectors SARD 550+ Collars $930 nengun

or Nismo 550 $890 nengun

5) Turbo GCG Hiflow $2000 [EDIT: now HKS GT-RS]

6) Beefy Fuel Pump *tick* Mk4 supra

7) Heavy duty clutch *tick*

?? 8) Fuel pressure reg eg $150 Nismo nengun

TOTAL $4050 + ?injectors + labour/tune

--> $5000-6000 complete, give or take a bit.

Bearing in mind i would be installing the PFC and FMIC myself, and then probably get it trailered to a shop with a turbo and injectors and get them to make it go :)

I want a bolt-on turbo without too much fussing around and i thought the GCG would be a good way to go for cost and ease of fitting.

a few questions for those that have done this before...

a) Will i need injectors? it seems that i will.

b ) Will i need a fuel pressure regulator?

c) Rough power - is 240rwkw reasonable or would 220rwkw be more likely?

and finally,

d) Would it be better to source parts and get them in, or get a shop to sort parts for me? I've heard so much conflicting information. I'm not set on getting "rice" name parts; they are just what came up on a quick price hunt for initial costing.

If i've left stuff out i'll try and add it in.

Thanks for your ideas/opinions/criticisms,

B

Edited by Beeble
Link to comment
Share on other sites

Im not in anyways experienced, but I dont think you'd require a Nismo fuel pressure regulator along with the injectors. Spend the cash and go injectors.

Also, search ebay for great condition 2ndhand 'name' brand intercoolers direct from Japan. Or a GTR cooler for $500 local with custom pipekit (again can buy a box of pipes off ebay and cut them to suit your application).

Sounds good though - I had a budget of 10k over 2yrs for my Stagea, already spent over 6k in 4 months! :)

Brendan

Link to comment
Share on other sites

Skip the fuel pressure regulator and go the injectors. I've read ppl having issues with the sards so I'd go the nismo for assurance.

If you're prepared to wait then ordering parts from nengun or the likes will be the cheapest way to go.

Link to comment
Share on other sites

Yep. If you're short on cash then a fuel pressure regulator will be enough to get you to 240rwkw but with enough money you might as well save the hassle and just go straight for the injectors.

Aftermarker injectors will be far more than enough for 240rwkw which you should be able to get with this setup :blink:

Link to comment
Share on other sites

Thanks for the replies guys.

Yeah i've got mods both sides of the engine, and have the stopping/handling side of things fairly well sorted aswell.

Been thinking of getting some bolt-ons for the engine for a while now, and i finally (read: a few years!) feel i know the car's limits well enough to strap on some extra kilowatts :blink:

Never ordered through Nengun before, but through a similar site (Taka Kaira). I'd be expecting 2 weeks or so for delivery?

Link to comment
Share on other sites

please read the sticky

http://www.skylinesaustralia.com/forums/in...showtopic=66556

mod order/suggestion threads are all covered in there.

only reason ill leave this open is you've given specific detail re: pricing and so forth.

here are some answeers for ya.

a) Injectors, dont need a reg, stock one is fine

B) Refer a)

c) 250rwkw, Bass Junky did with his GCG, but slightly different to normal one but around that you'll make, more than 220

d) PFC - get from nengun/greenline. Get a NEW Z32 AFM. 2nd hand ones cn be dodge and not worth the hassle

Link to comment
Share on other sites

go for 740cc's as they are like $5 extra per injector from nengun.

and get nismo instead of sard no need for collar crap

make sure you have 3" split dump and 3" hiflow cat

and some good tyres as well. good cold air intake dont leave the pod unshielded

Link to comment
Share on other sites

Okay after much reading and research and conversation i've decided on the HKS GT-RS. Good resale and i've read nothing but good reports.

Nengun has a package with PowerFC + 740cc Injectors + turbo kit, which i know a few people on SAU have installed in their cars already, with good results.

My concern is re: injector size.

I'm consistently getting told 550cc is plently for my needs. Having the overhead with the 740cc ones is fine, but a few shops have mentioned that the idle will be better with the 550cc ones.

The co$t between the two sizes is negligible

Does anyone have the 740cc injectors running, or know someone that does. any problems? This will be a daily driver battling peak hour traffic regularly so it is concerning :(

I've read every injector thread i could find and this issue is never mentioned. (maybe it's not much of an issue??)

I'm looking at getting this done in the next month(s) and will be sure to post dyno results etc for anyone else considering this path.

Cheers guys

Edited by Beeble
Link to comment
Share on other sites

Does anyone have the 740cc injectors running, or know someone that does. any problems?

I had them running in my car for over 8 months.

No problem what so ever

- direct fitting

- drove peak hour every day for about 4 months during that time also.

- idle was no different to stock (using a PowerFC)

You think the GT-RS isnt a bit of overkill for you though?

the GCG item is exceptionally nice and would be better suited IMO

Link to comment
Share on other sites

^^Thanks, good to know.

I'm aiming for 250rwkw. Looking at track days and some advanced driver training with the car once it's all sorted.

GCG hiflow rb25det's seem to vary from 220(base)-260(with cams)rwkw from what i've seen, whereas GT-RS cars seem to be consistently pulling around 240-250, higher with cams.

I have a feeling i'd be a little disappointed with 220 if that's what i ended up with, is all.

Price difference is about $600 all up, with a stock turbo to sell/play footy with. Resale value comes into it too - IMHO the HKS will come out on top when it comes time to sell the car.

Edited by Beeble
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hi all,   I have been a member here for years and am back to owning an R35.  It's my car and thought members of the community might enjoy sharing my journey.  I am definitely here to join the conversation.  If sharing this content isn't appropriate or it belongs somewhere else, I am happy to have it deleted or moved...
    • Data looks rock solid? I'm assuming you jabbed the throttle twice OR once? the TPS voltage moves up and down twice, however you've mentioned you did it once.
    • Having not watched the videos, I'm unsure, but this may be better suited to the importing thread?
    • Update on this situation: (Forgot to put in my previous post that I bought another brand new pressure gauge and fuel shows the same 50psi) I've deleted all the aftermarket immobilizers and turbo timer shyt and placed all factory wiring back to normal. The problem is still the same and nothing changed, but atleast it's a bit more tidier under the steering wheel. I've also siphoned out all the old fuel and then poured new batch of BP98 fuel (about 15L) into the tank. Nothing changed. Still the same idle. I also changed out the MAP vac line with a new one and, still the same.  So 2 days ago, I thought fk it. I'll just change out the fuel rail and injectors with another set that I know worked well in my brother's R34 a while back. That other fuel rail has the exact same Xspurt 640cc as what I have right now. So I changed it out to that other fuel rail and injectors (new O-rings) and injector harness. Put everything back together, started the engine, 464906286_1624569924763105_5179888796065901094_n.mp4   and yeah... still the same 50psi and idle problem. 🫠 I can also hear each of injector's solenoids running when I put a screw driver to it and have the other end to my ear. I might get a noid light just to confirm pulsasion but yeah, very strange that both fuel rails and injectors put out 50psi.  31-10-2024.csv I've attached it here. I started recording, then started the engine and let it idle with no throttle, then at the end I applied a little throttle and then stopped recording.    So, now idk. I'm going to see if swapping out the brand new R35 coils to my old splits fires will change anything. 🤷‍♂️
    • Hey mate, nice work on the car. Just a quick note, people generally don't like it when you use the forums to dump and run to advertise your YouTube content. If you're gonna stick around and join in the conversation then great, but if not this might not be the best place for you.  
×
×
  • Create New...