Jump to content
SAU Community

Whiteline Fitting In Brisbane

Gts-t
 Share

Recommended Posts

AzzurrA Grand Master

AzzurrA

Posted
Posted

have fun trying to find someone to do it... i rang around a lot of places, and they wouldn't do it, as it is a competing product against their own... geez, not even the Whiteline Distributor (Fulcrum) would fit it.... In the end i settled on a Workshop, but i will never go there again due to numerous problems with their work, and am actually taking them to court over it....

They're just on the northside of the city (lutwyche/windsor area) but i'm not going to name names due to legal reasons... but i'm sure you can figure it out from the above info...

(and no, i'm not going to tell anyone via pm either)

R34GTX Rising Star

R34GTX

Posted
Posted

Very strange. Maybe it depends on what amount of gear they are fitting? :)

thats strange, seeing as Fulcrum Stafford are one of the places who refused to fit my whiteline gear, and instead told me to buy their 'superpro' bushes or go elsewhere...

predator2 Enthusiast

predator2

Posted
Posted

pisses me off places that refuse to fit anything that they don't sell themselves..

with half the pain you go trying to find out finding a decent place, better off learning how to do it yourself..

I had a similar experience with fulcrum dealer down on the goldcoast.

jmac Rising Star

jmac

Posted
Posted

hey,

i got one of sydneykid's kits and got it installed at my mechanic's place down the road. called GMR genuine mechanical repairs in woolloongabba, speak to john he'll look after you and won't rip you off. then i just took it over to fulcrum to get it aligned. john can get a mobile guy in to do the alignment if you'd prefer.

hope that helps. :)

Gts-t Grand Master

Gts-t

Posted
  • Author
Posted
hey,

i got one of sydneykid's kits and got it installed at my mechanic's place down the road.  called GMR genuine mechanical repairs in woolloongabba, speak to john he'll look after you and won't rip you off.  then i just took it over to fulcrum to get it aligned.  john can get a mobile guy in to do the alignment if you'd prefer.

hope that helps. :(

What did he install for you, did you get the whole SK package?

Im only after front camber/castor rear camber installer. Have no issues doing shocks and swaybrars but form the looks of the suspension arms you need special tools to press the old bushes out and the new ones in. I have a press but not the tools. :(

If i could buy them from whiteline i would then i could fit this stuff for others as well. ..

Frustrating, but cheers again guys.

Mick

R34GTX Rising Star

R34GTX

Posted
Posted

I am paying $500 for camber, castor pineapples and 4 wheel alignment.

As I don't have time to do this myself I thought it was a good price. What do you guys reckon?

Cheers Pete

How much are you guys paying for fitting and allignment of the kits?

Does allignment include camber,castor and the rest etc.. adjustment as well?

R34GTX Rising Star

R34GTX

Posted
Posted

Hi guys.

Thought I would follow up on my suspension fit out at Stafford Fulcrum. Everything except for 1 thing went according to plan at Fulcrums. Apparently the left hand upper rear camber had slipped, so they couldn't dial in the setting that I was after. One of the guys said it would cost me $200 to get it sorted, however after speaking with Terry, there was no extra charge.

All in all the car feels much firmer both in the steering and also the rear end. I am yet to take it for a spirited drive due to the weather. I will also monitor the tyre wear over the next few thousand kms and change the cambers accordingly.

I also had a lenghty discussion with Terry regarding their Fulcrum Stafford store refusing to do whiteline installations. What he said was...and I quote, "We will never turn away business, we can't afford to do so, the market is too competitive".

He did however acknowledge that there have been a few employees from other stores come over to Stafford, and they may have been the ones to give the wrong information. He has assured me that they will do "ANY and ALL" fitment work on "ANY BRANDS" as long as it is safe to do so with the supplied hardware.

I hope this helps some people on the Northside. As I said before, I found Fulcrums to be quite competive on price and also very courteous in the way they carried out their work.

Cheers

Pete

thats strange, seeing as Fulcrum Stafford are one of the places who refused to fit my whiteline gear, and instead told me to buy their 'superpro' bushes or go elsewhere...

AzzurrA Grand Master

AzzurrA

Posted
Posted

hey mate...

i was in no way intending to bag Fulcrum out at all, sorry if it appeared that way, i was just passing on my experiences with them... was quite possibly one of those 'other guys' that i spoke to when i called up about my whiteline gear... I was a bit dissapointed when they said that, as i've had a fair bit of other work done by them, and been very happy every time, and wanted to use them again...

R34GTX Rising Star

R34GTX

Posted
Posted

Don't be sorry mate. I know you weren't bagging Fulcrum, and at the same time, I am not saying that Fulcrum are the best fitters in Brisbane. I just wanted to share my experiences and also to let people know that Fulcrum Stafford in most circumstances are Whiteline fitting friendly.

hey mate...

i was in no way intending to bag Fulcrum out at all, sorry if it appeared that way, i was just passing on my experiences with them... was quite possibly one of those 'other guys' that i spoke to when i called up about my whiteline gear... I was a bit dissapointed when they said that, as i've had a fair bit of other work done by them, and been very happy every time, and wanted to use them again...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Fixing exhaust position?

      By PranK · Posted

      I once hit my knee on an exhaust on my sisters Suzuki Sierra after she drove it her *normal* way. My knee looked like porridge for weeks. Bec and my daughters never go near this car. I can see one of my dogs losing an ear though. 🤔
    • Rezz
      R32 owner from ACT

      By Rezz · Posted

      Nice, love a good GTS-t.  IMHO the factory body kit with the 'aero' front bumper is perfect. Can't improve on it unless it's a GT-R. But it looks like you changed it to the normal bumper?
    • GTSBoy
      Fixing exhaust position?

      By GTSBoy · Posted

      Easy solution to both of those. Put a split bit of garden hose on each one. Attractive and practical!
    • GTSBoy
      Use text replace function to auto-link to referred threads?

      By GTSBoy · Posted

      So I guess the next thing to do will be to discuss whether to create a new section of the forums to hold the library (boo hiss?), somewhat undoing the recent tidy up, or if there is a bolt on wiki module for Invision? (I must profess ignorance as to what has been done, what it might cost, etc. I have only briefly googled and seen discussion on adding it.) Or is a wiki even the best way to do what I'm talking about? It possibly isn't. Given that we're trying to re-display forum content, it probably needs to be presented as forum content in forum format, and a wiki would probably struggle with that. A wiki might still be the best way to do some other things, so I'll keep the idea simmering if we don't use it here. Back to the library as "part of the forums". Would we do a single new library? Or put a library thread in each section? Pluses and minuses for each of these, surely. Would we do as I originally suggested, and make the first post in the library be the total of the library, with any reply posts just being the inputs and suggestions I originally posited? Or would we allow posts to accumulate one after the other, each containing additions to the library? Maybe the first post is still an index or something. It's all sounding horribly more manual and messy than my original brain fart. But I hope there's some other good ideas floating around - because every time I come up with a new one of my own I immediately see problems with it.  
    • The Bogan
      Fixing exhaust position?

      By The Bogan · Posted

      Tips look fine to me......but Boring stuff: Legalities - Vehicle standards notes that exhausts cannot extend to a point where they could cause injury Scary stuff: Mrs cuts open her shin putting stuff in the boot (ensure you have some bandaids and shiny jewellery handy)
×
×
  • Create New...