Hakai Posted November 19, 2005 Share Posted November 19, 2005 First off, I really do apologise if this has been covered before, I tried the search function for about 30min and found nothing of help to me. I recently bought my first Skyline, also my first Turbo car. Absolutely amazing to drive. The suspension is far from standard, adjustable, I believe but am yet to confirm as coilovers. Exhaust is awsome, nice low growl, non intrusive, immaculate interior etc. Sorry this is all irrelevant, I'm just soo happy with the car Engine is 100% stock. I've read alot here about people buying cars with idiotic and dangerous engine mods, mine is, as far as I can tell and see, completely standard. Problem is this, although I don't know if it's a problem or not, hence the question The temp the coolant runs at has be worried a little. My cars before this were a 5speed VL (RB30), and an N14 Pulsar. Both ran at about 33% of the temp gauge for normal operation. The Skyline runs at about 60-66% of the temp gauge. I checked the coolant, it was dirty dirty brown and stunk like sh!t. I did my first radiator flush/refill on it, gotta learn somehow I guess heh. Was cumbersom, but after a few hours and a few stops to check coolant level, I got it sorted and now the level is fine and overflow is fine. However; Temp still sits on 60-66% of the gauge. The other issue I'm worried about is the fact that after about 2-3 hours of being off, the engine retains a rather large amount of heat. I just stopped in at a mates for 2 hours, gauge was at normal 60-66% reading when turbo timer turned the car off. Got back in 2 hrs after it turned off, gauge was still at about 45% reading before I kicked her over. Quickly heated back up to around 66% and sat there as it always does. I'm really concerned, this is probably the most idiotic, newbie question ever asked, but I am so happy with the car and if anything is wrong I really want to know fast so I can get the thing fixed and continue to enjoy the brilliant drive If nothing is wrong, call me a moron and I'll still be happy Please, let me know if this is normal operating temperature and/or normal temperature decay (as in the engine as a rule retains heat this way for everyone), or if it's fine and I can stop worrying. Just a note: Tonight, after the 2 hrs stop, I popped the bonnet before I started her to see if maybe the engine was cool, and maybe the sensor for the temp gauge was faulty, but the actual engine (rocker cover, inlet manifold etc) was still very warm. Thanks in advance and apologies for the long repetetive post. I'm tierd and concerned Regards, Ben. Link to comment https://www.sau.com.au/forums/topic/95540-operating-temp-for-rb20det-in-r32/ Share on other sites More sharing options...
blind_elk Posted November 19, 2005 Share Posted November 19, 2005 It's not an idiotic question - the only idiotic question is the one you DON'T ask. So I'd say that doesn't make you a moron. When you popped the bonnet, you would have noticed that it's pretty crowded in there. So there's not much chance for fresh air to circulate and take away a bit of heat. As for the gauge, the needle sits probably around half way at least under normal conditions. So what you see is probably normal. Link to comment https://www.sau.com.au/forums/topic/95540-operating-temp-for-rb20det-in-r32/#findComment-1729493 Share on other sites More sharing options...
Cubes Posted November 19, 2005 Share Posted November 19, 2005 The skylines temp guage is designed in such a way to prevent you worrying. ~Half on the guage is anywhere from ~70degree's right up to a shade over 100degree's. The guage is decieving, if you look again and judge the position of the needle from the actual H mark you will see it is pretty much spot on 50%. The little line that goes up to 3/4 makes it look more. The skylines also warm up very quick, mine takes no less than 1-2km's. Link to comment https://www.sau.com.au/forums/topic/95540-operating-temp-for-rb20det-in-r32/#findComment-1729497 Share on other sites More sharing options...
Hakai Posted November 19, 2005 Author Share Posted November 19, 2005 It's not an idiotic question - the only idiotic question is the one you DON'T ask. So I'd say that doesn't make you a moron.When you popped the bonnet, you would have noticed that it's pretty crowded in there. So there's not much chance for fresh air to circulate and take away a bit of heat. As for the gauge, the needle sits probably around half way at least under normal conditions. So what you see is probably normal. <{POST_SNAPBACK}> So, it's crowded in there and the heat decay being really slow is normal. The heating up quick (1-2kms, that's pretty much what mine does) is normal too!! I love you guys Thanks heaps. Link to comment https://www.sau.com.au/forums/topic/95540-operating-temp-for-rb20det-in-r32/#findComment-1729509 Share on other sites More sharing options...
Cubes Posted November 19, 2005 Share Posted November 19, 2005 You will find most newish cars stay very hot under the hood. My old VS 5ltr commodore I think was actually a little hotter than the Skyline, pop the bonnet on that and you couldn't touch anything. Link to comment https://www.sau.com.au/forums/topic/95540-operating-temp-for-rb20det-in-r32/#findComment-1729522 Share on other sites More sharing options...
ToF Posted November 20, 2005 Share Posted November 20, 2005 Yer my 32 is the same as well, worried me at first but was assured near the middle was normal operating temperature. Link to comment https://www.sau.com.au/forums/topic/95540-operating-temp-for-rb20det-in-r32/#findComment-1729978 Share on other sites More sharing options...
AntonRx7 Posted November 20, 2005 Share Posted November 20, 2005 mine takes quiet a long time to warm up dono if this is a good thing or not. Link to comment https://www.sau.com.au/forums/topic/95540-operating-temp-for-rb20det-in-r32/#findComment-1730600 Share on other sites More sharing options...
Cubes Posted November 20, 2005 Share Posted November 20, 2005 If its a little slow warming up its probably running an aftermarket thermostat. They open much earlier and wider than the genuines. The genuine thermostats open smaller amounts and are also slower closing. In VL Commodores I've found aftermarket thermostats to cause slight over heating if hammering up a long hill with the a/c on at 1/2 throttle (Willunga Hill = Big arsed Hill). The Genuines run the car slightly warmer but hold a much more consistent temperature without the horrible overheats up Willunga Hill. I've never bothered with an aftermarket in the Skyline, I do know of one that keeps quite cool and often seens track days without overheating hiccups. So I'd assume an aftermarket thermostat (cheapy) in the Skylines works quite well. Link to comment https://www.sau.com.au/forums/topic/95540-operating-temp-for-rb20det-in-r32/#findComment-1730811 Share on other sites More sharing options...
konect Posted November 20, 2005 Share Posted November 20, 2005 I have fitted an aftermarket temp gauge a couple of months ago. Since then I have noticed my car go over 100c on several occasions (mainly 30c days). It sits anywhere from 70-105 (cold to hot days). Is this normal or is it cooking itself to death ? Link to comment https://www.sau.com.au/forums/topic/95540-operating-temp-for-rb20det-in-r32/#findComment-1731441 Share on other sites More sharing options...
W3asel Posted November 21, 2005 Share Posted November 21, 2005 yehh seems normal ey wat would be a temp that is lets say dangerous for the engine??? mine warning is on about 90 degrees...... ???? neva reaches that amount though... Link to comment https://www.sau.com.au/forums/topic/95540-operating-temp-for-rb20det-in-r32/#findComment-1731867 Share on other sites More sharing options...
Cubes Posted November 21, 2005 Share Posted November 21, 2005 konect, sounds very much like mine. For it to hit 105degree's you do have to be in some pain in the arse stressfull peak hour traffic with the a/c on and a hot day. Hit the AMB button, you will freak at the air temps. 60degree's is not uncommon. Link to comment https://www.sau.com.au/forums/topic/95540-operating-temp-for-rb20det-in-r32/#findComment-1731882 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now