Jump to content
SAU Community

Recommended Posts

--------------------------------------------------------------------------------

This is how I see it, if you are lucky enough to have a ten second car & you want to run it at the drags & have it road legal in NZ( IS IT THE SAME IN AUS) you can't= ten second cars have to have I full cage= cars with cages have to have a low volume cert before they can be woffed= you can't get a low volume with a cage in the front & bolt in cages are no good for tech inspection so you can't take it in & out to get a wof !

as for a nine second car ( yes I know that's a big call ) it has become even tougher in a GTR because you have to have to have a steel bell housing, unfortunately gtr boxes including hollenger & giken sequential' s have alloy bell housing's & you can't just change the bell housing to steel because it also incorperates the gearcase, imagine the cost of a custom made job- fark

ANY GOOD IDEA'S ?

Link to comment
https://www.sau.com.au/forums/topic/95698-you-have-a-ten-second-car-hard-luck/
Share on other sites

i thought you just have to have a shield around the bell housing. so the existing alloy one stays you just create a shiled around it. perhaps even allowed to run a ballistic blanket in place of that? but yes having a fully street legal 9 second GTR will be tough.

--------------------------------------------------------------------------------

This is how I see it, if you are lucky enough to have a ten second car & you want to run it at the drags & have it road legal in NZ( IS IT THE SAME IN AUS) you can't= ten second cars have to have I full cage= cars with cages have to have a low volume cert before they can be woffed= you can't get a low volume with a cage in the front & bolt in cages are no good for tech inspection so you can't take it in & out to get a wof !

as for a nine second car ( yes I know that's a big call ) it has become even tougher in a GTR because you have to have to have a steel bell housing, unfortunately gtr boxes including hollenger & giken sequential' s have alloy bell housing's & you can't just change the bell housing to steel because it also incorperates the gearcase, imagine the cost of a custom made job- fark

ANY GOOD IDEA'S ?

You can run a welded four point bar instead of a roll cage, good down to 10.000. You keep your Holinger gearbox and use an SFI spec ballistic blanket. Problems solved.

you obviously haven't been to VIC then. as long as you aren't caught driving an illegally modified car on the street, you can re-register the car without ever having it sighted. Technically meaning it only has to ever be inspected once in its life before becoming a purpose built track car. Just make sure you pay your rego every year (none of this blue, pink, green, orange and purple slip crap like in NSW) and you've got a "street registered" top fuel drag car with number plates, rego sticker and the paperwork... who cares that it was once registered as a VW beetle.

"fully street legal"

That's a tough one, I am looking out over a ~40 staff car park and I reckon 90% of the cars aren't "fully street legal".

Several of them have illegal tyre depth

Quite a few have non OEM tow bars

Lots have non standard wheels

Half a dozen have non OEM roof racks

A couple have non genuine mud flaps

All the Commondoors have at least one brake light not working

A few have non OEM mufflers

A couple of the utes have non OEM roll bars

Two have non OEM spoilers

All of the 4wd's have non OEM bull bars

etc etc

In fact, if I looked really hard I reckon I could find something not "fully street legal" about almost every car in the car park. That's the real problem, one man's "legal" is another man's "highly modified".

:( cheers :(

You can run a welded four point bar instead of a roll cage, good down to 10.000. You keep your Holinger gearbox and use an SFI spec ballistic blanket. Problems solved.

Hmm. Intersting MrBlonde. I'm currently contemplating cage construction, and I like the sound of that.

Explain when you have a moment?

Cheers

Sean

Hmm.  Intersting MrBlonde. I'm currently contemplating cage construction, and I like the sound of that.

Explain when you have a moment?

Cheers

Sean

Sean, it's right there in the rule book. You can run a four point rollbar instead of a six point cage, in a sedan down to 10.000.

RTA and highway patrol are much more accepting of a rollbar than a rollcage.

Sean, it's right there in the rule book. You can run a four point rollbar instead of a six point cage, in a sedan down to 10.000.

RTA and highway patrol are much more accepting of a rollbar than a rollcage.

Excellent. I shall consult my rulebook.

Thanks :rolleyes:

Sean, your car isn't street registered anyway is it?

Why not go the whole hog, there's a 9 in that thing of yours anyway with a decent launch (or so close you'll chase it anyway), why do it by half and then have to do it again.

That's a tough one, I am looking out over a ~40 staff car park and I reckon 90% of the cars aren't "fully street legal".

Several of them have illegal tyre depth

Quite a few have non OEM tow bars

Lots have non standard wheels

Half a dozen have non OEM roof racks

A couple have non genuine mud flaps

All the Commondoors have at least one brake light not working

A few have non OEM mufflers

A couple of the utes have non OEM roll bars

Two have non OEM spoilers

All of the 4wd's have non OEM bull bars

etc etc

In fact, if I looked really hard I reckon I could find something not "fully street legal" about almost every car in the car park.  That's the real problem, one man's "legal" is another man's "highly modified".

:P cheers :)

And the Police/RTA/powers-that-be will still yank the import/sports car/insert name of favorite car brand here because it's got a boost guage or something equally criminally outrageous in sight...

Where are the Rozzers when the early model Fawd/Commondoor with all the above listed "features",full of rust and an unrestrained child peering out the back window at your 'Line roars past(hole in the 'zorst,y'see)at 130 kp/h an a 100 zone as you try and do the right thing to stick to the limit for fear of the rubber glove treatment?!?

Sorry...got a bit carried away...Rant over!

Sean, your car isn't street registered anyway is it?

Why not go the whole hog, there's a 9 in that thing of yours anyway with a decent launch (or so close you'll chase it anyway), why do it by half and then have to do it again.

Yes she's registered - but is it legal, and do I drive it on the road much? Nooooooo.

I agree-a street legal 10 or 9 second car is practically impossible. Passing emissions laws alone would be the killer-let alone everything else...

Hmm-You're probably right chops. I was having a look at the rulebook last night and I think that a full cage would be wise. Considering the car was far from running at it's potential on the 10.45, and I can't even drive it properly yet, the probability that it'll go under 10.00 is pretty high.

I think that I'll also be going for a parachute mount at the same time so (only 3mph off now) it's all there when I need it-and for when I go to a bigger turbo (seriously :) )

Sean

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This is a story of my life things, I learned eventually (thanks to someone calling me out) that my enthusiasm for discussing and sharing ideas that it came across as arrogance and I'm like... WTF?!    One thing I'm pretty sure I justifiably pride myself on is knowing that everyone will have things they can teach you, and you're always going to find out that something you think you know turns out wrong - you just don't know what it is until you get there.   Just the bursting enthusiasm that comes with ADHD when you hit something that gives you dopamine dumps can come across like you think everyone else is wrong or don't matter. But yeah, I'm a software engineer by trade and also do tuning in weekends and 100% have long had a reputation for  quickly making connections when resolving problems or forming solutions that I've sometimes had to take people form a long walk from start to end to explain how I ended up where I did when it's seemed "too simple" when I've stated my initial case, and had the "WTF" type reaction when they've realised how much was actually considered haha.   My reward is that I get all the curly problems thrown at me.
    • Wives never seem to find things funny. Especially when they're trying to sleep, and you've found the new funniest thing ever. I've never seen someone be able to get try and be cranky with me, while they're holding back fits of laughter... 😛   Also, I tell mine it's payback anyway. She has BiPolar. So the household can get quite emotionally wild at times 😛
    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
×
×
  • Create New...