Laurel Diff

[tim83mm]

As the title states i have a manual laurel with a dead diff,

need info

like its replaceable with... ratios are... etc

any help would be great

thanks, Tim

[1400r]

s13 should fit however go for a 32 diff auto or manu is fine you might need to change the hats(?) over to the same bolt pattern as most (all)skylines are 6 bolt flange but it will be the right ratio 4.38 as sr's are 4.083 ca's are also 4.38 so they maybe ok too

[tim83mm]

what do you mean by hats,

is the whole centre, housing aswell repalcable with a r32/s13 centre

is there anywhere you can get a laurel diff from

[1400r]

hats or whatever there call the two bits on each side of the diff that join to the driveshafts. the "hats" come in 5 bolt and 6 bolt have a look at yours and try and find a diff with the same pattern so you dont have to swap the hats over

centre housing is the same s13,32,laurel,ceffy

If you want to spend a lot of money cause they will charge you more cause "laurel diff's" are hard to find you can ring all the imports parts places you can find and ask for a "laurel diff" in the end you will probably just get sold a 32 diff or a s13 diff

[EggmaN]

just go the s13 cheap and good i have no troubles with mine and their cheap as !

EGG

[1400r]

s13 is the wrong ratio and will make a rb20 powered car a pig to drive imo

[replicate]

I've got a 4.11 from an SR and its fine. 4.38 would be a pig around town and on the highway.

[drift monkys]

ummm... iv got a cefiro and was wondering if the s15 diff is any good.. ill be runnning the sr20det wit hthe six speed out of a s15 with a custom tailshaft.. would this diff fit?? :S

[1400r]

4.38 is nissan's factory ratio for rb20det powered cars auto or manual well atleast in 32's anyway