WTF is up with my BOV!! i have 2!!

[Guest | hype^ |]

check this out guys!!

when i bought the car i thought it had a stock BOV on .. but today i saw a piece of metal with "blitz" on it.. under the air box

im like cool iv got sumthin thats blitz...

i take a closer look and its a F**kn bov!!!

some idiot but a blitz bov on the car under the airbox and left the stock 1 there!!

and coz the stock 1 is ferther back the blitz 1 doesnt even get to go off!! it aint loud at all..

u cant hear the bov properly when u just rev it on the spot! only a lil on changes!!

what the hell do i do??

i was thinking of swaping the blitz and stock bovs around so the blitz 1 is the 1 used first for better sound..

or maybe replace the stock 1 with the blitz and some how block the hole where the blitz 1 was off (iv got nfi how to block it!)

what do uz recon???

[d0p3y]

Its all good, if the stock BOV isnt working that means they've blocked it off like they should've done..

[PranK]

dude, i have 2 bovs for that reason - the factory one is just a block for my blitz one.

[Guest | hype^ |]

im new at all this turbo s**t..

whats the point of leaving the stock 1 there???

u can but the blitz straight where the stock 1 is..

and the blitz bov should be louder than this! u can barly hear it..

[d0p3y]

heh who cares how loud it is.. as long as it works..

it cant be THAT quiet....

[Guest | hype^ |]

well its quiet enough,..

im not trying to be a try hard.. but id like to hear it..

i love that sound..

i dont care about other hearing it..

i just want it loud for me..

[d0p3y]

its probrably just quiet because of where its located.. change where its located and it should be louder tho u will need new piping me thinks

[PranK]

mine is right next to my intercooler, and if anyone on these boards has heard it, they will agree with me when i say it is BLOODY loud!!!!

My stock one just blocks up that piping..

see...

[XrSiSt]

Oh damm.. now thats going to be loud!!! :uh-huh:

[JiMb0]

Yes ... very loud

[Guest | hype^ |]

dam prank! nice position! - my blitz is right under the airbox iv got no idea why they put it there.. but it should sound better after i remove the airbox and get a filter

prank.. the problem with mine was that the stock was not blocked off..

so the air was filtering through the stock 1 and didnt have a chance to get to the blitz.

i fixed it today..

i but a piece of metal between the piping and the stock valve..

now he air goes straight to the blitz bov!

sounds nice!!!

but i need more boost and a POD filter and exhaust to make it sound louder:uh-huh:

[Guest | hype^ |]

by the way nice mags prank..

mine are nearly exactly the same

[PranK]

yeah. its VERY loud there... if i hit boost hard through any tunnels (spesh the harbour tunnel) it is seriously deafening. My whole front bar shakes when it goes off.

Yeah, i luuuurve my DTMS!! (thanks too).

JiMb0 experienced my bov at low boost last w/end.

[JiMb0]

I accept nothing less now Prank ..... I could do a series of commercials like the Kleenex "nothing feels soft any more" series ...

Nothing blows me away any more ....

[PranK]

Well J, | hype^ | experienced the BOV at low boost yesterday and he looked impressed.

[JiMb0]

You sure that wasn't the look of surprise as he realised he'd shat his pants ? :lol:

[GTR-80Y]

lol, Prank the pedestrian terrorist! Bov is handily located on the left hand side....does it blow chicks skirts up?:lol:

[JiMb0]

Course, he has a camera located in the side skirt set with a 0.02 delay to catch the pics

[Guest | hype^ |]

YEH PRANK!!

was i impressed or what!!!

did i hear u right in saying that it was only 2pound!??

that thing was loud as hell!!

:uh-huh:

i like the way u pulled right up next to my window with the wheel.. :lol:

and i got laughted at by prank's gf when i showed him mine,!

i cant believe its the same valve!!!:eek:

[PranK]

that was Bec 2. I have 2 becs, my gf and my other bec (a good friend) - that was my friend Bec, not my gf.... it gets confusing.

yeah, when i lifted off it had only hit 2psi. or thereabouts.

GTR80Y, i need to angle the valve upward!!