Jump to content
SAU Community

Recommended Posts

  • Replies 183
  • Created
  • Last Reply

Top Posters In This Topic

So you guys really rate the GCG hi-flow as the best option for the 34GTT?  I have an auto as well and probably chasing 250rwkw for the time being.  How much extra kw will this turbo give just by itself :D  I'm currently on about 200 so I don't know.  If it's a long way off, I might as well get a different turbo.

We rate it as a good comprimise. An upgraded turbo needs supporting mods like injectors, fuel pump etc. to be used properly.

Pick a power figure then pick a turbo to suit. You don't want 250rwkw with a 2835ProS because you are wasting the turbos top end and therefore introducing needless lag. But if you can get 250 with a GCG highflow without getting out of its efficiency zone then you have chosen the right turbo for your required power. (And saved yourself a big pile of money in the process:D)

Search!!!

Since i searched this to death recently... :

without cams most are getting 230-250rwkw, mostly 240-250, some are around 220-230 (and seem to have been a little disappointed)

with cams up to 265 eg SK's cars

I spent a lot of time trying to compare GCG hiflows Vs HKS GT-RS, but i can't find many power figures for the HKS item :( they seem fairly similar though...

Edited by Beeble

All the information you guys need is already on here.

For a GT-RS or GCG highflow you will need injectors, fuel pump, probably a fuel regulator, full exhaust, high flow panel filter or pod in a box, some sort of engine management and modification or replacement of the AFM to turbo pipe which will suck closed at this power level.

A GT-RS is a slight step up from the GCG HF. People have achieved 300rwkw with cams. If you high flow an R33 turbo you will not get as much power as a highflow of the R34 turbo as the exhaust housing is bigger on the R34. An alternative is to put a VG30 rear housing on the R33 turbo.

I've got 480cc Nismo injectors. I don't know/remember what Bass Junky has used. Also, did you go to Z32 AFM Bass?

i had my car dyno'd the other day as i had a ebc fitted to stop rich retard or boost cut or whatever it was. With stock computer and boosted to 10psi i only pulled 160rwkw. I have blitz lm fmic 3" exhaust filter. That seems a little low what do you guys think. Its and auto r34 by the way.

Bass,

Id like to compare your car to mine as i pulled 244 rwkw in my R33 HKS 2535 on 14psi (no cams), on the Racepace dyno.

It would be interesting to see how they compare!

Can i race the winner, ive got a 2535 and only pushed 231rwkw.

thanks bass.

was that with same mods as me? ie I/C exhaust?

i have bought emanage ultimate and am waiting for an ignition signal adaptor to come so i can fit it. I wonder how much more power i get. How much did you get with computer?

SK's 265rwkw figure was recorded in Shootout mode which at 250rwkw reportedly gives about 10-15 rwkw higher figure.

Quick clarificatin, we have been able to duplicate the 265 rwkw (+ or - a couple of rwkw) in non Shoot Out mode. Several times during winter with ambient temperatures in the mid teens and inlet (to the filter) temps just under 20 degrees.

It is one of the reasons why I can confidently say that Shoot Out mode doesn't ALWAYS give higher power readings. Well, not on our dyno anyway.

:( cheers :(

What is the most power you can get out of a GCG hi-flow with all supporting mods on an R33 GTS-T manual?

We have seen an R34GTT (R34GTT turbine housing) with 275 rwkw. That's on Sydney Optimax. If I remember rightly Bullant (Ian) acheived similar with his R33GTST using a VG30 turbine housing. Using Elf TurboMax I have seen 310 rwkw.

:( cheers :(

Edited by Sydneykid

OK so a GCG hi-flow would be good for up to about 250rwkw... after a decent tune. I'm assuming that the SAFCII won't be good enough for tuning purposes?

So for all supporting mods:

1 x hi flo turbo or similiar

1 x new fuel pump

1 x adjustable fule reg

1 x new management system???

Would you guys reccomend getting new injectors or would the R34 stock injectors be good for 250rwkw?

Stan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A bit of data is always good, beats the Facebook experts with their opinions I have Bosch 1480cc injectors, often called 1650cc (only when run at 4bar). I run mine at 3bar base so I don't thrash the fuel system. Up top, making 437kW with boost dropping, injector duty is at 69% on E80 (might have had some residual 98RON in there)  
    • I have some downtime due to winter, and just wrapped up converting the car over to flex fuel. We don't get E85 at the pump over here in Canada, but I will be running Ignite E90 Race gas. I'll be mixing it with 99-100 RON pump gas and shoot for 50% ethanol content, up to possibly 85% content if there's any noticeable gains. Here's the question. Most I'll ever want to hit is ~600rwkW. I've currently running 1200cc injectors and want to keep them under 90% duty cycle. As per some online injector calculators, I should be good with 1200's well past 600rwkw on E85. As per other calculators, I'll need 1600-2000cc's. The variety is rather amusing.  With you Australians having E85 at the pump, what realistic duty cycles are you seeing in those kW ranges on E50 & E85 on your injectors? Thanks, 
    • No issues here with my PRP gears in an OEM pump housing. I did confirm all housing clearances were to spec prior though. Cheers. 
    • Thread is a bit old but figured id give my input anyway just incase. Have had lots of water problems in my R32 and was getting sick of wet tools in the boot and water filling up half my taillights. I ended up finding that whenever my car had been repainted they didn't reseal the taillights to the body of the car so water was just flowing straight into the boot, this is amplified by all the water around the bootlid being directed down to the taillights so would get pretty wet whenever I washed the car or it rained. You could probably use silicone to seal them to the body but I think from factory they use a roll of automotive grade butyl rubber. Hopefully this helps you if that ends up being how the water is getting in on your car!
    • Correct And whatever you do, don't use an oil pump gear, especially the one that starts with the same letter as Santa and the last letter ends with the same first letter as Lagoon. Get a proper oil pump, like a Nitto, Tomei, etc. and make sure you invest in a big fk off sump. Won't go into too much detail, but I am sure it caused my previous built motor to go bang.
×
×
  • Create New...