Jump to content
SAU Community

Recommended Posts

  • Replies 183
  • Created
  • Last Reply

Top Posters In This Topic

So you guys really rate the GCG hi-flow as the best option for the 34GTT?  I have an auto as well and probably chasing 250rwkw for the time being.  How much extra kw will this turbo give just by itself :D  I'm currently on about 200 so I don't know.  If it's a long way off, I might as well get a different turbo.

We rate it as a good comprimise. An upgraded turbo needs supporting mods like injectors, fuel pump etc. to be used properly.

Pick a power figure then pick a turbo to suit. You don't want 250rwkw with a 2835ProS because you are wasting the turbos top end and therefore introducing needless lag. But if you can get 250 with a GCG highflow without getting out of its efficiency zone then you have chosen the right turbo for your required power. (And saved yourself a big pile of money in the process:D)

Search!!!

Since i searched this to death recently... :

without cams most are getting 230-250rwkw, mostly 240-250, some are around 220-230 (and seem to have been a little disappointed)

with cams up to 265 eg SK's cars

I spent a lot of time trying to compare GCG hiflows Vs HKS GT-RS, but i can't find many power figures for the HKS item :( they seem fairly similar though...

Edited by Beeble

All the information you guys need is already on here.

For a GT-RS or GCG highflow you will need injectors, fuel pump, probably a fuel regulator, full exhaust, high flow panel filter or pod in a box, some sort of engine management and modification or replacement of the AFM to turbo pipe which will suck closed at this power level.

A GT-RS is a slight step up from the GCG HF. People have achieved 300rwkw with cams. If you high flow an R33 turbo you will not get as much power as a highflow of the R34 turbo as the exhaust housing is bigger on the R34. An alternative is to put a VG30 rear housing on the R33 turbo.

I've got 480cc Nismo injectors. I don't know/remember what Bass Junky has used. Also, did you go to Z32 AFM Bass?

i had my car dyno'd the other day as i had a ebc fitted to stop rich retard or boost cut or whatever it was. With stock computer and boosted to 10psi i only pulled 160rwkw. I have blitz lm fmic 3" exhaust filter. That seems a little low what do you guys think. Its and auto r34 by the way.

Bass,

Id like to compare your car to mine as i pulled 244 rwkw in my R33 HKS 2535 on 14psi (no cams), on the Racepace dyno.

It would be interesting to see how they compare!

Can i race the winner, ive got a 2535 and only pushed 231rwkw.

thanks bass.

was that with same mods as me? ie I/C exhaust?

i have bought emanage ultimate and am waiting for an ignition signal adaptor to come so i can fit it. I wonder how much more power i get. How much did you get with computer?

SK's 265rwkw figure was recorded in Shootout mode which at 250rwkw reportedly gives about 10-15 rwkw higher figure.

Quick clarificatin, we have been able to duplicate the 265 rwkw (+ or - a couple of rwkw) in non Shoot Out mode. Several times during winter with ambient temperatures in the mid teens and inlet (to the filter) temps just under 20 degrees.

It is one of the reasons why I can confidently say that Shoot Out mode doesn't ALWAYS give higher power readings. Well, not on our dyno anyway.

:( cheers :(

What is the most power you can get out of a GCG hi-flow with all supporting mods on an R33 GTS-T manual?

We have seen an R34GTT (R34GTT turbine housing) with 275 rwkw. That's on Sydney Optimax. If I remember rightly Bullant (Ian) acheived similar with his R33GTST using a VG30 turbine housing. Using Elf TurboMax I have seen 310 rwkw.

:( cheers :(

Edited by Sydneykid

OK so a GCG hi-flow would be good for up to about 250rwkw... after a decent tune. I'm assuming that the SAFCII won't be good enough for tuning purposes?

So for all supporting mods:

1 x hi flo turbo or similiar

1 x new fuel pump

1 x adjustable fule reg

1 x new management system???

Would you guys reccomend getting new injectors or would the R34 stock injectors be good for 250rwkw?

Stan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It’s not driver training though, it’s just an online questionnaire and $65 
    • Almost certainly no. In Vic they have this crazily restrictive set of rules for mods that is usually interpreted as "no more than 2 modifications to the intake system". And they're not real hot on upgraded turbos at all, let alone high mounts. That means if you fit a bigger (particularly front mount) intercooler (which is, of course, almost impossible to go without) then you're already down to one other mod allowed. You'll really benefit from hearing from someone from Vic who knows the real state of play. Even better, speak to an automotive mods certifying engineer from Vic. You can actually read the rules from the govco websites yourself, too.
    • Well, I'm not clicking on a link to f**king bookface (never have, never will), so I can't really know what the complaint here is about, but.... There's nothing particularly wrong with forcing people to have a higher license category to drive super/hypercars. Note that the laws are not about modified cars - only listed standard cars, because there are not supposed to be cars modified enough to meet the law's category limits anyway. If you have a modified car that falls into those power limits you're already in trouble anyway. What is wrong is the bullshit on-line "test" to get the upgrade, instead of any actual work and training.
    • Meh Don't have Facebook anymore but watched a YouTube about it, they also talked about them not being able to use and "sports" modes, not really sure how they would enforce that apart from logging the Db for the cars that have exhaust valve activation in sports mode Apart from all the high end sports cars and supercars that make the sort of power they are talking about standard, I cannot see it bothering anyone else, unless of course road side tests now include having a dyno and scales on site to test the power output vs weight What is it? 500hp per ton? And if the only additional cost is $60 or so, as the video stated, I cannot see that being a war stopper for the people that outlay a few hundred thousand dollars on a performance car In fact, I see it would be a ego boost for some, because they have a "special" drivers licence for a "special"person with a "special" car And if I did have a modified car that made over the limit, there's no way in hell I would apply for a "special" licence, I could see the authorities checking your licence against your rego, so if old mate applied for a licence, but owns a, say, R33 Skyline, that may trigger an inspection of said car as to why, and how, that old mate has a R33 that would fit the bill of making over 500hp per ton Again, meh, not something I believe will be a real issue to 99.9% of people
    • https://www.facebook.com/groups/mechanic.com.au/permalink/2029367984190485/?   Here we go…. 😢
×
×
  • Create New...