Jump to content
SAU Community

Recommended Posts

  • Replies 183
  • Created
  • Last Reply

Top Posters In This Topic

So you guys really rate the GCG hi-flow as the best option for the 34GTT?  I have an auto as well and probably chasing 250rwkw for the time being.  How much extra kw will this turbo give just by itself :D  I'm currently on about 200 so I don't know.  If it's a long way off, I might as well get a different turbo.

We rate it as a good comprimise. An upgraded turbo needs supporting mods like injectors, fuel pump etc. to be used properly.

Pick a power figure then pick a turbo to suit. You don't want 250rwkw with a 2835ProS because you are wasting the turbos top end and therefore introducing needless lag. But if you can get 250 with a GCG highflow without getting out of its efficiency zone then you have chosen the right turbo for your required power. (And saved yourself a big pile of money in the process:D)

Search!!!

Since i searched this to death recently... :

without cams most are getting 230-250rwkw, mostly 240-250, some are around 220-230 (and seem to have been a little disappointed)

with cams up to 265 eg SK's cars

I spent a lot of time trying to compare GCG hiflows Vs HKS GT-RS, but i can't find many power figures for the HKS item :( they seem fairly similar though...

Edited by Beeble

All the information you guys need is already on here.

For a GT-RS or GCG highflow you will need injectors, fuel pump, probably a fuel regulator, full exhaust, high flow panel filter or pod in a box, some sort of engine management and modification or replacement of the AFM to turbo pipe which will suck closed at this power level.

A GT-RS is a slight step up from the GCG HF. People have achieved 300rwkw with cams. If you high flow an R33 turbo you will not get as much power as a highflow of the R34 turbo as the exhaust housing is bigger on the R34. An alternative is to put a VG30 rear housing on the R33 turbo.

I've got 480cc Nismo injectors. I don't know/remember what Bass Junky has used. Also, did you go to Z32 AFM Bass?

i had my car dyno'd the other day as i had a ebc fitted to stop rich retard or boost cut or whatever it was. With stock computer and boosted to 10psi i only pulled 160rwkw. I have blitz lm fmic 3" exhaust filter. That seems a little low what do you guys think. Its and auto r34 by the way.

Bass,

Id like to compare your car to mine as i pulled 244 rwkw in my R33 HKS 2535 on 14psi (no cams), on the Racepace dyno.

It would be interesting to see how they compare!

Can i race the winner, ive got a 2535 and only pushed 231rwkw.

thanks bass.

was that with same mods as me? ie I/C exhaust?

i have bought emanage ultimate and am waiting for an ignition signal adaptor to come so i can fit it. I wonder how much more power i get. How much did you get with computer?

SK's 265rwkw figure was recorded in Shootout mode which at 250rwkw reportedly gives about 10-15 rwkw higher figure.

Quick clarificatin, we have been able to duplicate the 265 rwkw (+ or - a couple of rwkw) in non Shoot Out mode. Several times during winter with ambient temperatures in the mid teens and inlet (to the filter) temps just under 20 degrees.

It is one of the reasons why I can confidently say that Shoot Out mode doesn't ALWAYS give higher power readings. Well, not on our dyno anyway.

:( cheers :(

What is the most power you can get out of a GCG hi-flow with all supporting mods on an R33 GTS-T manual?

We have seen an R34GTT (R34GTT turbine housing) with 275 rwkw. That's on Sydney Optimax. If I remember rightly Bullant (Ian) acheived similar with his R33GTST using a VG30 turbine housing. Using Elf TurboMax I have seen 310 rwkw.

:( cheers :(

Edited by Sydneykid

OK so a GCG hi-flow would be good for up to about 250rwkw... after a decent tune. I'm assuming that the SAFCII won't be good enough for tuning purposes?

So for all supporting mods:

1 x hi flo turbo or similiar

1 x new fuel pump

1 x adjustable fule reg

1 x new management system???

Would you guys reccomend getting new injectors or would the R34 stock injectors be good for 250rwkw?

Stan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • While there is no current law for the spoon, let's swap to a different utensil. Example, does the store get fined for selling a butter knife if it ends up being a murder weapon? Perhaps they cpuld be done for assisting if they *knew* it was going to be for such a purpose. But, if used properly, which was its primary design, it's a tool for a job that's legal. I could understand companies being prosecuted if they advertise their products for being road legal if they in fact, are not. Possibly, but not necessarily, the tuners for tuning a car to a non legal fashion(emissions), but there is always the possibility that the customer really doesn't intend to use the car, in that configuration, on the road. So long as the companies can prove they have conveyed how illegal it is to use the now illegal car, in a place where the vehicle must meet the laws, they shouldn't be punished. Not sure about other countries or states, but I've been made aware that I can't legally stop a client from taking and driving their own car in NSW, Australia, even if they owe the shop money. It must go through court to get the funds from the customer, and you need to get the police or roads covering body representatives to come and stop the owner from driving the car, even if I know how hazardous the vehicle is.
    • probably around the $1700-1800 fitted in his sizes.  The ar1 is heaps cheaper. Get on scumplace I got some A052 295/35/18 for $400 that had done maybe 20-25 hot laps of SMP. 
    • People are going faster on CRS than AR1, so there's that 😕
    • Go the CRS, cheaper than the A052 and same if not better 1 lap performance when suspension is dialled for it. If wanting to do back to back laps the A052 and can cool off and go again next lap will be the better option. I have gone quicker over 1 lap with CRS than the A050 I came from but may be due to getting more seat time. I am driving CRS on the street lately in different conditions and its going well, a lot better than AR1 in the wet. AR1 is a race tyre, CRS is a Hill Climb/time attack/Sprint tyre. 2 different things, a slick is on the way too. The mighty gay mods choice of tyre is proper rubbish for those that actually drive on track not park at bunnings at night.
    • Seems to be a common issue, I had a look at two used tanks and both had similar cracks to mine. No one that does plastic welding near me seems to want to do it to a fuel tank lol
×
×
  • Create New...