Jump to content
SAU Community

Recommended Posts

  • Replies 183
  • Created
  • Last Reply

Top Posters In This Topic

OK so a GCG hi-flow would be good for up to about 250rwkw... after a decent tune. I'm assuming that the SAFCII won't be good enough for tuning purposes?

So for all supporting mods:

1 x hi flo turbo or similiar

1 x new fuel pump

1 x adjustable fule reg

1 x new management system???

Would you guys reccomend getting new injectors or would the R34 stock injectors be good for 250rwkw?

Stan

Why wouldnt a SAFC be up to the job? For the supporting mods Im looking at using the SITC / SAFC combo, with stnd injectors, bosch pump and nismo regulator..... wanting 200awkw from non-neo Rb25.

......... why I can confidently say that Shoot Out mode doesn't ALWAYS give higher power readings. Well, not on our dyno anyway

lol I found that funny! man, what Id give to have a dyno in MY garage (at home, not work). :lol:

Brendan

Basically because SAFC will only do fuel and air control? There is no timing control option in that... hence why I said it's probably not the best option.

I'm running 200rwkw at the moment, just gathering information for the big jump :P Hopeful that I can get it all done with $5k

Thats right, so grab a Apexi SITC (super ignition timing converter), fairly rare now but I found a brand new one for $220US on ebay. Being installed right....about....NOW!

:P

Brendan

well i just got off the phone with my tuner and my car is going in on friday to get the emanage ultimate fitted. All this talk of power has made me antsy. I dont think the ultimate needs the ignition signal adapter like the older version does, but i iwll soon find out. As for the zener diodes i think that i will put them in anyways, just waitning for and email from 666DAN. NO one else has a wiring diagram for the inclusion of zenners in the ingintion wiring do they?

Am looking into it right about now :P

Anyone else know if this thing will work?

Satan,

See Stagea section, Gary's thread (SK) Apexi Super Ignition Timing Computer, he reckons its all good, and thats good enough for me by far.

Mine is going on the Stagea right now (yesterday / today), with high pressure fuel lines, nismo adjustable fuel pressure regulator, bosch 040 fuel pump, and a z32 afm.

Getting it all ready for the turbo upgrade, hopefully I dont need larger injectors........

worth a look maybe, start on ebay. :lol:

Brendan

powerplay quoted me $1600 for rom tuning. that is a fkn joke. considering it needs to be done everytime you do more mods. Emanage ultimate with all harness(even car specific harness) and greddy e01 ebc cost me $1600. If rom tuning was cheap it would be a good option, but they want ridiculous amounts to do it.

Isn't there a Daughterboard you can buy through a group buy here that allows you to modify the stock rom form your laptop......

Was quite cheap too I beleive.

Dr Drift can tune them.

I was wondering how long it wopould take for SK to see this.

Any further thoughts on my 250rwkw ceiling SK?

14psi, very conservative timing......

Id say Race Paces dyno is very very generous. 250rwkw at 14psi when its not even in the turbos effeceint range sounds a little too high. Considering you can pump another 5psi and easily get another 20-30rwkw. i went from 17-20psi and i picked up 13rwkw and at least 30rwkw in the middle with a 2535. Silva33 got 244rwkw on 14psi with a 2535 on the same dyno. Put another 5psi in that we are looking at 270rwkw, i just cant see that from a 2535. Considering i only am getting 231rwkw at 19psi from a 2535 from a dyno dynamics dyno in shootout mode. It may read low but thats all i got. Tuning for max power isnt too hard, get the A/F ratios in the high 11's and some good timing in her. Watch the knock, if its too high bring out some timing, its not too hard. Unless you are running no timing, your still going to produce some good numbers. Good tuning is in the light/middle throttle which takes alot of time and effort.

Unfortunately those dyno sheets dont show the setup of how the dyno was run. Dynos can quite easily be enhanced.

Nah, RacePace is one of the best in the country.

He doesn't play with the numbers because most of the people going there aren't worried about numbers. Just getting the best from their cars.

Ash's R31/RB25DET ran 20rwkw higher in Shootout mode on the same dyno, and it's known to be conservative.

I'm not even into the efficient range of the GCG.  14psi is quote low.

but dont forget GCG probably are rating @ a stock head style setup

non cams, and are they counting the fact itrs a NEO in thier info for you?

I had a little run with Silvas 244Rwkw (14psi) with my old 2530 setup and basically it wasnt as close as what it should have been

driver.

youve been racing yours @ the strip for a while now remember

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • H2 (for cars) will never happen. It's not reasonable for any number of reasons. It's also not reasonable for almost all of the industrial uses that the fanbois say that it will be used for, again for a large number of reasons. There are some cases where it will be good. But, even those will be massively hampered by the economics. The only way that H2 can be economic is if we somehow manage to get from where we are to the other side of the economic-valley-of-death in which no-one can operate. You need there to be sufficient renewable generated electricity to be available so that it is effectively free. Once you are there, you can do whatever the hell you want and hang the efficiency. But until you get there, the ever diminishing value of electricity makes it harder and harder to encourage businesses to build the new generation capacity, and they will simply stop investing in generation projects. (I kinda think there needs to be just government money spent on building the required capacity in a non-commercial way, similar to how the first fossil fueled grids were built, as national-government owned utilities. And probably some nuclear in there to start. But this all should have started 10-15 years ago to avoid the chasm of death that we face right now). Synth fuels will be much more likely, but will only occur is there is at least some renewable H2 production, because you need H2 to do it. And you need stacks of free (or at least extraordinarily cheap) energy because assembling molecules back into fuels is exactly the opposite process to burning the fuel, and the reason we burn fuels is because there is so much energy squeezed into each molecule. So you're somewhat subject to the same economic valley of death problem as above anyway. That is unless people are willing to pay the current equivalent of $5 or $6 per litre of petrol-ish liquid fuels. Can you imagine it? The squealing at $2 now is bad enough.
    • This is so cool. Get a dashcam that records audio and hopefully you'll catch it.  Maybe there's a brand or some kind of markings on the back ? Are the pics hand drawn? I love it so much.
    • Hahaha yep, point(s) taken. I just like seeing different things and an EV in an R32 is pretty different. I'm not on the EV band wagon, I'm waiting for synthetic fuels or hydrogen personally. 
    • I mean it's probably likely that people overestimate their skills in dialling in a setup and noticing the changes. I had SK shocks and springs, and added heavier springs and got them revalved by Sydney Shocks to suit based upon what I told them I wanted the car to handle like. I got back a completely different feeling set of shocks, which probably (?) feel great on track but holy hell are they rough on tram tracks and the like. The shock dyno actually looks pretty similar to Shockworks (from what I can surmise from a screenshot of a youtube video - and my dyno printout...) Truth be told I doubt I'd be any faster or slower with either setup, or camber/castor combination. I also had whiteline eccentric castor bushes up front of my R34. I removed them and put in poly non-adjustable ones to soothe my OCD (nobody ever set the castor the same side to side, and it'd be near impossible to do) and be happy the wheel is centered in the well now for clearance reasons. Yes I wanted it to move 1mm 'back' :p I've effectively set my castor back to stock, negating all the benefits of that which is supposedly massive. I've probably also altered toe and camber in a negative (detrimental) way. I can't tell any difference steering the car.
×
×
  • Create New...