Jump to content
SAU Community

Tomei Poncams And Tomei Gears

ido09s
 Share

Recommended Posts

ido09s Mentor

ido09s

Posted
Posted (edited)

Item: Tomei Poncams

Location: Sydney

Item Condition: As new

Reason for Selling: Upgrading

Price and Payment Conditions: $900 Prefer pickup

Contact Details: PM or e-mail at [email protected]

Hey all

looking at upgrading the cams we currently have. The cams are a type B cam which are a 260 degree, 9.15mm lift on both inlet and exhaust. Being a Poncam they are direct replacement cams. They have done about 8000klms and are in perfect condition. The oil in the engine was changed religiously every 3000klms with only Motul oil so these cams are as new.

They are located in Sydney and pick up would be preferred. Direct deposit is not a problem as i have access to a courier.

Brad

Edited by ido09s
Link to comment
https://www.sau.com.au/forums/topic/96289-tomei-poncams-and-tomei-gears/
Share on other sites
ido09s Mentor

ido09s

Posted
  • Author
Posted
will these fit rb25? r34

The part numbers are different between RB26 and 34 Neo, so i don't think so but your best to ask some of the other guys with Neo's on here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Any feedback on GReddy Turbine Kit T620Z in r33 GTST/RB25DET?

      By Dose Pipe Sutututu · Posted

      Nice modern Hypergear high flow would be perfect.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      I'm confused. You said you want to "remove the clear coat from most panels" but it sounds like you are actually doing a full respray? Few random things to add -  If you chase the blistered paint with 120 grit, I can almost guarantee you'll chase it down to bare metal (that's fine). But if you paint the car from here, you'll have nice little indents where ever the blistered paint was. The new paint won't magically level out the low areas, you need to fill them. Which leads me to the main point I wanted to add, make sure the whole car is flat before you paint it. All those areas with blistered paint you sanded out, make sure to fill them and triple check they are flat with a block guide coat. I'd also check the whole car is flat with a large block and guide coat but yeah up to you if you want to go that far.   
    • Duncan
      Any feedback on GReddy Turbine Kit T620Z in r33 GTST/RB25DET?

      By Duncan · Posted

      300hp (225kw) is barely outside the standard turbo's range with a bit of extra boost in it (200ish). If you are going to change the turbo you should aim for 250-300kw (330-400hp) to make the expense worthwhile
    • Murray_Calavera
      Any feedback on GReddy Turbine Kit T620Z in r33 GTST/RB25DET?

      By Murray_Calavera · Posted

      A couple of things, firstly omg that turbo is expensive! $3,000 USD for dinosaur technology is robbery. You could buy a G series turbo and have a good amount of change instead.  If you want a good budget option, have a look here - https://hypergearturbos.com/product/rb25dethighflow/ If you are keen to spend more, have look at the modern turbos, Garrett G series, Borgwarner EFR, etc. Have a look at the RB25 dyno results thread for inspiration.  If you upgrade your turbo to something that will support the 300hp you want and only "probably" have Haltech ECU, your car will only "probably" run. Actually, no it won't run. You are going to need the ECU and injectors at the time you do the turbo upgrade.  No thoughts on "this much boost" as you didn't say how much boost that actually is. Having said that, plenty of unopened RB25's making even more power then what you are chasing.   
    • jacobzking
      Any feedback on GReddy Turbine Kit T620Z in r33 GTST/RB25DET?

      By jacobzking · Posted

      I'm looking for a direct bolt on turbo upgrade for my 93 R33 GTST.  Anyone have experience with this Greddy T620Z turbo upgrade? I'd like to be able to run about 300hp to the rear wheels without putting too much strain on the turbo. I do daily drive the car.  Pretty stock car with basic bolt ons (exhaust outlet, down pipe, high flow cat and catback exhaust along with intake and FMIC).  I'l probably have a Haltech plug n play on the car before installing the turbo. https://www.greddy.com/products/turbo-upgrade-ecr33-er34-t620z-rb25-11520057   Also, any thought on this much boost on a 30 year old motor with 250,000KMs?  Engine feels/sounds strong for what it's worth.   Thanks you in advance!
×
×
  • Create New...