Jump to content
SAU Community

Recommended Posts

The last few days I've had ALL the warning lights flash on at night. I've had good oil pressure, plenty of oil, good engine temps, nothing seems to be wrong... It has mainly happened when either trning hard, or accelerating hard. ALL the lights come on, even the spare tyre light and windscreen washer light...

Anyone else had this happen? I'm guessing theres a loose wire somewhere maybe?

Link to comment
https://www.sau.com.au/forums/topic/96447-dr30-dash-warning-lights/
Share on other sites

I had this happen the other week, check the wiring from the alternator to the starter motor and make sure that the but is done up tight!! Mine was earthing out on the support bracket for the plenum and causing all my dash lights to stay on!!!!

Yeah i've had 3 alternators go in about 4 months, got one rebuilt and haven't had issues with it yet, but i don't drive it as much anymore so who knows....

No idea what an alternator is worth Adam, go suss some places out ring around easiest way

Yeah pretty sure it is close to one, just have to change the wiring or something..

I got mine rebuilt by s&b auto electricals, Jacobsen cresent, instead of turning right to go to jaustech, turn left and its behind a furniture place up there if he's still there, if not i'll get the addy of my old boy, he's a mate of my dad's so yer....

same thing happend to me on friday night. 5 mins before i got home my alternator stopped charging, the power cable form the alt to starter had fried...replaced the cable and all is sweet now!

  • 1 month later...

It sounds like the regulator is stuffed though. The alternator should be putting out ~14V throughout the rev range. You aren't doing your electrical system (or your battery) any favours by driving it.

I bet your headlights brighten up nicely when you give it a rev, eh? :P

Depending on your alternator, you will either have an internal or an external regulator. From the factory, they had an external regulator (if memory serves).

My l20et's old alternator used to do this. I was told it was the Rectifier by a few auto electricians. I got another alternator for free and thre it on and it solved alot of problems i had with the vehicle.

My lights are dim as hell, I thought it was getting buggerall voltage, thats why I thought the alternator was stuffed

they probably are getting bugger all voltage, but its more likely down to the crappy old switch gear and low amp cable to the headlights in the factory loom. rewire with relays and serious cable.

changing the alternator is a drive way job son, should take about an hour or so, i wouldn't be stuffing around with changing regulators, if you've got a number for the alternator just get a new alternator, and keep the other one for a spare

  • 3 weeks later...

hey so does anyone have any part numbers for replacement alternators.. or spare parts or anything??? mines now cooked for the second time, only got it rebuilt a couple of days ago, and it died within a few hours of driving...? what gives?

to my knowledge it was rebulit with aussie parts from an MR30..

also does anyone have anything lying around that i might be able to buy as a replacement?

cheers.

dave

also does anyone know of any other alternator off a different vechile that happens to have the same connection at the rear, and same bracket mount points.. because if i can id like to install something with an external regulator to enable the ease of service again at a later date.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...