Jump to content
SAU Community

Recommended Posts

Hi All,

My A/C compressor has seized and I need a new one. After speaking to part importers, it would seem that there are 4 different compressors fitted to skylines. Calsonic, Hitachi and 2 others..

I've looked at it and can't find any brand names - where should I look?

If I put photos of it up, could anyone tell me what it is?

I've compared it to a calsonic item off a rb25det engine but it does not look the same.

The Skyline in question is a series 1 1993 R33.

Thanks to anyone who can help.

Chris

Link to comment
https://www.sau.com.au/forums/topic/96484-what-aircon-compressor-do-i-have/
Share on other sites

Chris,

Just take yours off and match it with another. It's the best way I found as there are too many different types / brands / pipe connection positions / electrical connections. BTW, my Compressor is a "Kikki Diesel".

Then once you've got a replacement compressor, get it overhauled including the electro-magnetic clutch so you'll never need to touch it again :D

Chris,

Just take yours off and match it with another. It's the best way I found as there are too many different types  / brands / pipe connection positions / electrical connections. BTW, my Compressor is a "Kikki Diesel".

Then once you've got a replacement compressor, get it overhauled including the electro-magnetic clutch so you'll never need to touch it again :P

Thanks Fat32.

I looked up a kiki diesel one and it's not the same either.

Does anyone know where to try to get one on the Gold Coast or surrounding areas? I've tried alljap and Rolin imports.

Chris

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...